[paranoia] cdparanoia output
Matthew Hetzel
mhetzel at iname.com
Sun Jan 16 10:51:26 PST 2000
Monty et al,
I wish convey my sincere appreciation for what all of you are doing with
cdparanoia. It is well appreciated!
I have enclosed the output of cdparanoia -vsQ on 9.7. I am only sending
this to you because it tells me to. I am having no problems.
Once again, we appreciate it greatly -- even if we don't always say it.
:)
Thanks,
Matthew Hetzel
cdparanoia III release 9.7 (December 13, 1999)
(C) 1999 Monty <monty at xiph.org> and Xiphophorus
Report bugs to paranoia at xiph.org
http://www.xiph.org/paranoia/
Checking /dev/cdrom for cdrom...
Testing /dev/cdrom for cooked ioctl() interface
/dev/sg0 is not a cooked ioctl CDROM.
Testing /dev/cdrom for SCSI interface
generic device: /dev/sg0
ioctl device: /dev/scd0
CDROM sensed: BTC CD-R OM FOEP1.1
Checking for SCSI emulation and transport revision...
Drive is ATAPI (using SCSI host adaptor emulation)
Checking for MMC style command set...
Drive is MMC style
Verifying CDDA command set...
Expected command set FAILED!
Performing full probe for CDDA command set...
test -> density: [none ] command: [28 0x,00]
Drive rejected read command packet(s)
test -> density: [yes/0x00] command: [28 0x,00]
Drive rejected density set
test -> density: [yes/0x04] command: [28 0x,00]
Drive rejected density set
test -> density: [yes/0x81] command: [28 0x,00]
Drive rejected density set
test -> density: [none ] command: [a8 0x,00]
Drive rejected read command packet(s)
test -> density: [yes/0x00] command: [a8 0x,00]
Drive rejected density set
test -> density: [yes/0x04] command: [a8 0x,00]
Drive rejected density set
test -> density: [yes/0x81] command: [a8 0x,00]
Drive rejected density set
test -> density: [none ] command: [be 00,10]
Drive rejected read command packet(s)
test -> density: [none ] command: [be 00,f8]
Command set FOUND!
(please email a copy of this output to paranoia at xiph.org)
Looking at revision of the SG interface in use...
New style SG with scatter/gather memory management
DMA scatter/gather table entries: 256
table entry size: 32768 bytes
maximum theoretical transfer: 3566 sectors
Setting default read size to 13 sectors (30576 bytes).
Attempting to determine drive endianness from data..........
Data appears to be coming back little endian.
certainty: 100%
Table of contents (audio tracks only):
track length begin copy pre ch
===========================================================
1. 20130 [04:28.30] 0 [00:00.00] no no 2
2. 13922 [03:05.47] 20130 [04:28.30] no no 2
3. 15690 [03:29.15] 34052 [07:34.02] no no 2
4. 16793 [03:43.68] 49742 [11:03.17] no no 2
5. 20652 [04:35.27] 66535 [14:47.10] no no 2
6. 16098 [03:34.48] 87187 [19:22.37] no no 2
7. 29885 [06:38.35] 103285 [22:57.10] no no 2
8. 15155 [03:22.05] 133170 [29:35.45] no no 2
9. 20480 [04:33.05] 148325 [32:57.50] no no 2
10. 19767 [04:23.42] 168805 [37:30.55] no no 2
11. 19118 [04:14.68] 188572 [41:54.22] no no 2
12. 18690 [04:09.15] 207690 [46:09.15] no no 2
13. 16967 [03:46.17] 226380 [50:18.30] no no 2
14. 24975 [05:33.00] 243347 [54:04.47] no no 2
TOTAL 268322 [59:37.47] (audio only)
--- >8 ----
List archives: http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body. No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
More information about the Paranoia
mailing list