[paranoia] CDParanoia output

[Andrij Korud]

This is putput CDParanoia asks me to send you. 
Linux: 2.2.13
CDROM: Sony CDU625 on Adaptec AIC-7896/7 Ultra2 SCSI
*********************************************************

                CDROM sensed: SONY CD-ROM CDU625 1.0r 

Checking for SCSI emulation and transport revision...
        Drive is SCSI

Checking for MMC style command set...
        Drive is MMC style
Verifying CDDA command set...
        Expected command set FAILED!
        Performing full probe for CDDA command set...
        test -> density: [none    ]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [be 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d4(12)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(12)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d5 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d5 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [d8 0x,00]
                Command set FOUND!

Thanks for this phantastic software.
Andriy Korud, Lviv, Ukraine

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.