[paranoia] cdparanoia output

[Peter R. Wood]

Hi, I'm emailing the output of cdparanoia -vsQ.  This is on my UMAX
SuperMac J700/180 (Power Mac clone), running LinuxPPC 1999 Q3/Linux
Kernel 2.2.13 compiled with generic SCSI support.

Checking /dev/cdrom for cdrom...
        Testing /dev/cdrom for cooked ioctl() interface
                /dev/scd0 is not a cooked ioctl CDROM.
        Testing /dev/cdrom for SCSI interface
                generic device: /dev/sg1
                ioctl device: /dev/scd0
                CDROM sensed: MATSHITA CD-ROM CR-506 8S05 

Checking for SCSI emulation and transport revision...
        Drive is SCSI

Checking for MMC style command set...
        Drive does not have MMC CDDA support
Verifying CDDA command set...
        Expected command set FAILED!
        Performing full probe for CDDA command set...
        test -> density: [none    ]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(12)0x]
                Command set FOUND!
                (please email a copy of this output to
paranoia at xiph.org)

Peter

--
Peter R. Wood - Computer Science - Gordon College - Wenham, MA
pwood at peace.gordon.edu - http://www.cs.gordon.edu/~pwood/
"For out of the overflow of the heart the mouth speaks."
 --Matthew 12:34b

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.