[Speex-dev] Nominal Jitter buffer Configuration.

Hu, Eric Jianzhong (Eric) ehu at alcatel-lucent.com
Sun Dec 23 19:20:49 PST 2007

Hi All,


I have a question regarding the nominal jitter buffer configuration:


The call was setup as G.729A (annexb=no), ptime=20ms and nominal jitter
buffer size = 50ms, and round trip delay is 200ms, the TDM side will
experience intermittent one way voice during the call, but IP side can
always heard the voice from TDM side. My question is, should this
possible caused by the nominal jitter buffer? If there didn't have large
network jitter, should the nominal jitter buffer set to 10 or larger and
what's the impact?





-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20071224/211b02bd/attachment.html

More information about the Speex-dev mailing list