[paranoia] output of cdparanoia -vsQ (it said I should mail it)

[Chris Picton]

Checking /dev/cdrom for cdrom...
 Testing /dev/cdrom for cooked ioctl() interface
  /dev/cdrom is not a cooked ioctl CDROM.
 Testing /dev/cdrom for SCSI interface
  generic device: /dev/sg1
  ioctl device: /dev/cdrom
  CDROM sensed: MATSHITA CD-ROM CR-504-J SS17

Checking for SCSI emulation and transport revision...
 Drive is SCSI

Checking for MMC style command set...
 Drive does not have MMC CDDA support
Verifying CDDA command set...
 Expected command set FAILED!
 Performing full probe for CDDA command set...
 test -> density: [none    ]  command: [28 0x,00]
  Drive rejected read command packet(s)
 test -> density: [yes/0x00]  command: [28 0x,00]
  Drive rejected read command packet(s)
 test -> density: [yes/0x04]  command: [28 0x,00]
  Drive rejected density set
 test -> density: [yes/0x81]  command: [28 0x,00]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [a8 0x,00]
  Drive rejected read command packet(s)
 test -> density: [yes/0x00]  command: [a8 0x,00]
  Drive rejected read command packet(s)
 test -> density: [yes/0x04]  command: [a8 0x,00]
  Drive rejected density set
 test -> density: [yes/0x81]  command: [a8 0x,00]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [be 00,10]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [be 00,f8]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [be 04,f8]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [d4(10)0x]
  Drive rejected read command packet(s)
 test -> density: [yes/0x00]  command: [d4(10)0x]
  Drive rejected read command packet(s)
 test -> density: [yes/0x04]  command: [d4(10)0x]
  Drive rejected density set
 test -> density: [yes/0x81]  command: [d4(10)0x]
  Drive rejected read command packet(s)
 test -> density: [none    ]  command: [d4(12)0x]
  Command set FOUND!
  (please email a copy of this output to paranoia at xiph.org)
This command set may use a Force Unit Access bit.
Checking drive for FUA bit support...
 Drive rejected FUA bit.

Looking at revision of the SG interface in use...
 New style SG with scatter/gather memory management
 DMA scatter/gather table entries: 128
 table entry size: 32768 bytes
 maximum theoretical transfer: 1783 sectors
 Setting default read size to 13 sectors (30576 bytes).

Attempting to determine drive endianness from data.......
 Data appears to be coming back little endian.
 certainty: 100%


--
Chris Picton
Usko Communications Systems Developer
Chris.Picton at usko.com

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.