[Icecast] got icecast2 working, but hear nothing

[Kristoffer Gustafsson]

Ok, shall I change the default card in alsa settings?
thanks.
/Kristoffer

2016-11-10 14:48 GMT+01:00, unosonic <un at aporee.org>:
>
> plug in your 302 USB
>
> enter: lsusb
>
> you should see: Bus 001 Device 005: ID 08bb:2902 Texas Instruments Japan
> PCM2902 Audio Codec
>
> look at syslog:
> ...
> usb 1-1.2: new full-speed USB device number 5 using dwc_otg
> usb 1-1.2: New USB device found, idVendor=08bb, idProduct=2902
> usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-1.2: Product: USB Audio CODEC
> usb 1-1.2: Manufacturer: Burr-Brown from TI
> input: Burr-Brown from TI USB Audio CODEC  as
> /devices/platform/soc/20980000.usb/usb1/1-1/1-1
> usbcore: registered new interface driver snd-usb-audio
> ...
>
> enter: arecord -l
>
> you should see: card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB
> Audio]
>
> that means all is fine so far.
>
> in darkice.cfg, try this for the input section:
>
> # this section describes the audio input that will be streamed
> [input]
> device          = hw:1,0
> sampleRate      = 44100
> bitsPerSample   = 16
> channel         = 2
>
> [icecast2-0]
> your settings for icecast here...
>
>
> that works, tested it with a line-in source 5 min ago with my 302.
>
>
> u.
>
>
>
>
>
> Kristoffer Gustafsson:
>> Hi.
>> I didn't Think of saying thank you. I Had so much to do.
>> I have beenup very late and tried with this.
>> I found the thing now.
>> In order to record from the soundcard you have to capture it in alsa.
>> in alsa there is no such Controls. none at all for the behringer mixer.
>> I'll ask about this on the alsa list too, and then take a break from this.
>> sorry that I didn't say thank you. I shall be better with this in the
>> future.
>> /Kristoffer
>> 2016-11-10 8:44 GMT+01:00, Kristoffer Gustafsson
>> <kg.kristoffer at gmail.com>:
>> > Hi.
>> > Finally I got icecast and darkice to work.
>> > I can connect, but now I've got a problem.
>> > I can't hear anything.
>> > I can hear sound from the computer, but not from Another computer when
>> > connecting.
>> > I've got an usb mixer.
>> > behringer xenyx 302.
>> > I'm using alsa.
>> > What can this be?
>> > /Kristoffer
>> >
>> > --
>> > Kristoffer Gustafsson
>> > Salängsgatan 7a
>> > tel:033-12 60 93
>> > mobil: 0730-500934
>> >
>>
>>
>> --
>> Kristoffer Gustafsson
>> Salängsgatan 7a
>> tel:033-12 60 93
>> mobil: 0730-500934
>> _______________________________________________
>> Icecast mailing list
>> Icecast at xiph.org
>> http://lists.xiph.org/mailman/listinfo/icecast
> _______________________________________________
> Icecast mailing list
> Icecast at xiph.org
> http://lists.xiph.org/mailman/listinfo/icecast
>


-- 
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934