[icecast] Ices2 / Icecast2 / Long connect and no sound

[Karl Heyes]

On Tue, 2003-05-27 at 21:06, adam leigh wrote:
> Unfortunately, ices2 isn't writing anything to the logs.  I've got them on
> debug mode, but there still isn't anything being written to indicate it's
> having a known problem.

well thats a problem, you should at least see 
ices started
if not then try to resolve that first.  Email the config file to me and
I'll have a quick look.

> As far as the interference goes, I've found that reducing the iGain and amping
> the input source seems to reduce the interfencence a good deal, at least, good
> enough such that it's only a low murmur in the background.  I have tinkered
> with the bitrates, however, and have found them to have little effect.  Unused
> inputs have all been muted.

On mine, I have a Mic Boost which can add horrid interference to the
audio.

> The secondary (PCI) card still only broadcasts silence even when changing the
> settings mentioned above.  It continues to send no sound even when I have a
> microphone connected to the card and I can hear it over the local speakers. 
> Nothing on the mixer app seems to change this.

Either ices is listening to the wrong dsp device or the mixer has not
set the correct input to record.

karl.

<p>--- >8 ----
List archives:  http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to 'icecast-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.