[icecast] Liveice & Icecast...help

Matthew Mencel matt at techminer.net
Wed Mar 21 21:41:23 PST 2001



If you want to hear what it sounds like, take a listen.  I'll have it up for
another 20 mins or so.

216.89.166.14:8000

-----Original Message-----
From: owner-icecast at xiph.org [mailto:owner-icecast at xiph.org]On Behalf Of
harvey smith
Sent: Wednesday, March 21, 2001 11:20 PM
To: icecast at xiph.org
Subject: RE: [icecast] Liveice & Icecast...help

Your distro probably came with an sound mixer application. I use aumix on
the console which i had to go get, but you may already have, see if you
have a man page. Else you can search freshmeat.net for it. You will need
to make sure _line_in_ is set for recording and set the _rec_ volume at
1/2 to start and adjust by trial and error. NOTE: the _line_in_ Volume
adjusts how loud you HEAR the source, but it's the _rec_ Volume that
adjusts how loud it's recorded (in this case sent to the Liveice process).

Harvey

On Wed, 21 Mar 2001, Matthew Mencel wrote:

> How do I change the record volume.  I am doing all this from the console,
no
> GUI.  I have not seen anything in any of the config files to set the
record
> volume.
>
> Matt
>
> -----Original Message-----
> From: owner-icecast at xiph.org [mailto:owner-icecast at xiph.org]On Behalf Of
> harvey smith
> Sent: Wednesday, March 21, 2001 10:43 PM
> To: icecast at xiph.org
> Subject: Re: [icecast] Liveice & Icecast...help
>
>
> I've used a Sound Blaster AWE32 / Liveice combo before.
>
> Sounds like your record volume is set WAY to high or more likely you are
> recording from the wrong input. Make sure that it's the _line_in_ that's
> selected for recording in you mixer app.
>
> Also If i remember you have to use HALF_DUPLEX mode (in liveice.cfg) at
> least if you're using MIXER mode... I'm not sure about in SIMPLE mode,
> expirement.
>
> Harvey
>
> On Wed, 21 Mar 2001, Matthew Mencel wrote:
>
> > I'm running FreeBSD 4.2.  I downloaded and installed Icecast 1.3.10,
> > Liveice, mpg123, and Lame.  I know the Icecast streamer is working
because
> I
> > can feed it from WinAMP on my PC and listen to the stream somewhere else
> and
> > it sounds fine.  I know liveice is working too because Icecast shows
that
> it
> > connects and is sending audio to it.  However when I listen to the
stream
> on
> > my PC with WinAMP it's aweful.  It sounds like the audio is really
> > overdriven, very distorted, grinding noise.  In fact I can't even hear
> > anything of the stream, just the grinding buzzing, and it is very loud.
> I'm
> > feeding to the line in on my sound card from a portable radio.  I get
the
> > same effect though whether the audio is plugged into the sound card or
> not.
> >
> > I imagine this is a hardware problem with the sound card, but it's a run
> of
> > the mill Sound Blaster AWE32 I think and I figured it would be the most
> > supported.  I recompiled the kernel to get the audio to work, and if I
> send
> > an audio file directly to the audio device I can hear it just fine.
It's
> > only when I start up liveice that I get the distortion.  I'm kind of a
> > newbie at this audio streaming so don't hate me if this is a really dumb
> > question.
> >
> > Thanks for any help.
> >
> > Matt
> > matt at techminer.net
> >
> >
> > --- >8 ----
> > List archives:  http://www.xiph.org/archives/
> > icecast project homepage: http://www.icecast.org/
> > To unsubscribe from this list, send a message to
> 'icecast-request at xiph.org'
> > containing only the word 'unsubscribe' in the body.  No subject is
needed.
> > Unsubscribe messages sent to the list will be ignored/filtered.
> >
>
>
> --- >8 ----
> List archives:  http://www.xiph.org/archives/
> icecast project homepage: http://www.icecast.org/
> To unsubscribe from this list, send a message to
'icecast-request at xiph.org'
> containing only the word 'unsubscribe' in the body.  No subject is needed.
> Unsubscribe messages sent to the list will be ignored/filtered.
>
>
> --- >8 ----
> List archives:  http://www.xiph.org/archives/
> icecast project homepage: http://www.icecast.org/
> To unsubscribe from this list, send a message to
'icecast-request at xiph.org'
> containing only the word 'unsubscribe' in the body.  No subject is needed.
> Unsubscribe messages sent to the list will be ignored/filtered.
>

--- >8 ----
List archives:  http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to 'icecast-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.

--- >8 ----
List archives:  http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to 'icecast-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.



More information about the Icecast mailing list