[xiph-commits] r13831 - trunk/theora-fpga

[andre.lnc at svn.xiph.org]

Author: andre.lnc
Date: 2007-09-15 18:33:46 -0700 (Sat, 15 Sep 2007)
New Revision: 13831

Added:
   trunk/theora-fpga/README
Log:
Readme added

Added: trunk/theora-fpga/README
===================================================================
--- trunk/theora-fpga/README	                        (rev 0)
+++ trunk/theora-fpga/README	2007-09-16 01:33:46 UTC (rev 13831)
@@ -0,0 +1,81 @@
+THEORA HARDWARE
+
+================================================
+DOCUMENTATION
+
+doc/
+
+ Here you will find some data about theora hardware and implementation
+
+doc/leon3_integration
+
+ This is the webpage that describe step by step the theora-hardware integration
+ You can acess on http://www.students.ic.unicamp.br/~ra031198/theora_hardware/
+
+================================================
+LEON3 INTEGRATION
+
+leon3/driver
+
+  Linux driver for theora hardware
+
+leon3/leon3_vhdl
+  
+  The VHDL modified files of LEON3
+
+leon3/kernel_config
+
+  Kernel versions that I am using is the linux-2.6.21.1 for MMU system
+
+leon3/quartus_config_EP2S60
+
+  Quartus configuration for FPGA ALTERA EP2s60 like pins locations and logiclock especifications
+
+leon3/theora_amba_interface
+
+  Hardware that is plug on AMBA/APB bus and do the interface between libtheora and theora_hardware
+
+leon3/vga_amba_interface
+
+  Hardware that is plug on AMBA/APB bus and is used with the full libtheora and just for show the video on monitor
+
+leon3/libtheora_fpga/full
+
+  Libtheora-1.0alpha6 that will send the datas to vga_amba_interface. If you want to use this on linux you need to do some changes, see on doc/leon3_integration
+
+leon3/libtheora_fpga/cut
+
+  Libtheora-1.0alpha6 that is cut to send the datas to theora hardware. If you want to use this on linux you need to do some changes, see on doc/leon3_integration
+
+leon3/libtheora_fpga/ogg2inputvector.c
+
+  It is used when you want to put the Theora on FPGA without a LINUX. It will generate a vector of inputs of a ogg file in order to compile this with the dump_video software
+
+================================================
+NIOS INTEGRATION
+
+nios/
+<to complete>
+
+================================================
+TESTBENCHS
+
+testbenchs/expandblock
+testbenchs/idctslow
+testbenchs/include
+testbenchs/loopfilter
+testbenchs/reconrefframes
+testbenchs/vga_controller
+
+These are all the testbench of theora hardware
+
+testbenchs/libtheora_tb
+
+This is the libtheora that will generate the inputs and outputs (golden files) for the modules under test
+
+================================================
+THEORA HARDWARE VHDL MODULES
+
+theora_hardware/
+
+Here you can find the finals theora hardware modules