[Speex-dev] AEC strangest behavior

[Greger Burman]

One thing I can think of is if you are using two or more speakers. If the
speakers are not at the exact same distance from the mic, you will get more
than one echo. AEC can not handle that. Try disconnecting all but one
speaker and see if it makes any difference.

cheers
Greger

2010/3/15 Anton A. Shpakovsky <saa at tomsksoft.com>

>  Hello.
>
> I have the following situation. AEC is used in network chat software
>
> over DirectSound API. Echo and reference signals are almost aligned
>
> (delay is no more than 30ms). When echo is emulated in notebook
>
> (built-in speakers + mic) everything goes fine and echo is cancelled.
>
> But when configuration includes stand-alone speakers and mic no echo is
>
> removed. Audio is in 22050 hz at 16 bit mono format, number of samples
>
> to process were 441 and tail was used 4096.
>
>
>
> Dumps are here:
> http://rapidshare.com/files/317389207/speex_AEC_test.rar.html
>
> nb_*** - working configuration (notebook)
>
> sa_*** - standalone speakers with no echo removed
>
>
>
> Can it be because of differences in fixed and arbitrary acoustic systems?
>
> I will appreciate any of your advises or thoughts.
>
>
>
> Thanks!
>
>
>
> Anton A. Shpakovsky
>
> Multimedia Software Developer
>
>
>
> _______________________________________________
> Speex-dev mailing list
> Speex-dev at xiph.org
> http://lists.xiph.org/mailman/listinfo/speex-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20100315/564be9c0/attachment.htm