[paranoia] problems ripping cds

[Jack Pistachio]

Definately the same issue.  I encountered the same problem
on a Gigabyte MB with the same VIA chipset.  Using a
different CDRW drive fixed the issue, as also did putting
the same CDRW on the promise controller.  Can't remember if
upgrading the kernel helped as well... its been a while.
- jackp

<p>--- himba <himba at siol.net> wrote:
> Jack Pistachio wrote:
> > What is your ide chipset?  Many have had similar
> problems
> > (inluding myself) on via chipsets.  See archived
> messages. 
> > If you have a promise controller on the same mb, try
> using
> > that.
> > - jackp
> > 
> I have Gigabyte MB with VIA chipset
> 00:11.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus
> Master IDE (rev 06)
> 
> I take alook at the archives tommorow...
> 
> thanx for rply
> 
> rgds.himba
> > 
> > 
> > --- himba <himba at siol.net> wrote:
> > 
> >>hello
> >>
> >>I was courios about audio CD ripping under linux and
> ran
> >>into cdparonia 
> >>project. I'm runing Suse9 and have currently installed
> a
> >>CDROM and CDRW 
> >>ATAPI devices. Both are using ide-scsi module. I can
> get
> >>CD track info, 
> >>but I can't rip none of my audio CDs. The light on
> device
> >>is lit, but 
> >>kernel log has several reports:
> >>....
> >>Jan 12 16:56:10 xodus kernel: scsi : aborting command
> due
> >>to timeout : 
> >>pid 517, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00
> >>00 00 00 00 00 
> >>00 07 f8 00 00
> >>Jan 12 16:56:10 xodus kernel: hdc: lost interrupt
> >>Jan 12 16:56:10 xodus kernel: ide-scsi: The scsi wants
> to
> >>send us more 
> >>data than expected - discarding data
> >>Jan 12 16:56:10 xodus kernel: ide-scsi: [[ be 0 0 0 0 0
> 0
> >>0 7 f8 0 0 ]
> >>Jan 12 16:56:10 xodus kernel: ]
> >>Jan 12 16:56:10 xodus kernel: ide-scsi: expected 16464
> >>got 18816 limit 16464
> >>Jan 12 16:56:10 xodus kernel: ide-scsi: transferred
> 7056
> >>of 9408 bytes
> >>Jan 12 16:57:10 xodus kernel: scsi : aborting command
> due
> >>to timeout : 
> >>pid 520, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00
> >>00 00 00 21 00 
> >>00 0d f8 00 00
> >>Jan 12 16:57:10 xodus kernel: hdc: lost interrupt
> >>Jan 12 16:57:10 xodus kernel: hdc: irq timeout:
> >>status=0xd0 { Busy }
> >>Jan 12 16:57:10 xodus kernel: hdc: ATAPI reset complete
> >>Jan 12 16:57:10 xodus kernel: hdc: irq timeout:
> >>status=0x80 { Busy }
> >>Jan 12 16:57:10 xodus kernel: hdc: ATAPI reset complete
> >>Jan 12 16:57:10 xodus kernel: hdc: irq timeout:
> >>status=0x80 { Busy }
> >>....
> >>
> >>I'm using SCSI emulation.
> >>
> >>Is there a way to remedy this?
> >>
> > 
> > 
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
> > http://hotjobs.sweepstakes.yahoo.com/signingbonus
> > --- >8 ----
> > List archives:  http://www.xiph.org/archives/
> > Paranoia homepage: http://www.xiph.org/paranoia/
> > To unsubscribe from this list, send a message to
> 'paranoia-request at xiph.org'
> > containing only the word 'unsubscribe' in the body.  No
> subject is needed.
> > Unsubscribe messages sent to the list will be
> ignored/filtered.
> > 
> 
> --- >8 ----
> List archives:  http://www.xiph.org/archives/
> Paranoia homepage: http://www.xiph.org/paranoia/
> To unsubscribe from this list, send a message to
> 'paranoia-request at xiph.org'
> containing only the word 'unsubscribe' in the body.  No
> subject is needed.
> Unsubscribe messages sent to the list will be
ignored/filtered.

<p>__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.