[paranoia] SOLVED: Problems with cdparanoia

Fri Dec 6 08:44:44 PST 2002

I'm not sure, because I don't have grip, but I believe there is a dialog box or something to set the device that grip uses. I think it should be /dev/sg0

On Fri, 6 Dec 2002 16:20:24 +0100 
"Peron, Stéphane" <stephane.peron at dcmc.creditlyonnais.fr> wrote:

> I can add that without the emulation of scsi (I mean when the cdrom is used
> as an IDE drive).... libparanoia works very well.
> 
> So, it comes from my scsi configuration or a bug in libparanoia ...
> 
> -----Message d'origine-----
> De : Sims, Ted [mailto:ted at tedsims.com] 
> Envoyé : vendredi 6 décembre 2002 13:51
> À : paranoia at xiph.org
> Objet : Re: RE : [paranoia] SOLVED: Problems with cdparanoia
> 
> 
> You do not have to pass "hdc=ide-scsi" with the config I explained below.
> 
> I'm afraid I don't know about your libparanoia problem, but I'm sure someone
> on this list should know.
> 
> Kindest regards
> 
> On Fri, 6 Dec 2002 11:26:47 +0100 
> "Peron, Stéphane" <stephane.peron at dcmc.creditlyonnais.fr> wrote:
> 
> > Hi .... 
> > 
> > Thanks Sims .. from now I can read and burn without any problem .... 
> > 
> > But I can't ripp with libparanoia .... that lib doesn't seem to find my
> > drive.
> > For example, when I run grip, my cdrom is read, I can select files to
> > extract and when I try to dot it, I have the following message :
> > "Can't open the cdrom drive" or something like this.
> > 
> > thanks for your help !
> > 
> > Stéphane PERON
> > 
> > PS : So... do I have to pass "hdc=ide-scsi "with the config explained
> below
> > ?
> > 
> > -----Message d'origine-----
> > De : Sims, Ted [mailto:ted at tedsims.com] 
> > Envoyé : mardi 3 décembre 2002 00:58
> > À : paranoia at xiph.org
> > Objet : Re: [paranoia] SOLVED: Problems with cdparanoia
> > 
> > 
> > Here is the setup I always use which works well...
> > 
> > (1) At compile time-
> > 	(a) ide atapi cdrom _off_
> > 	(b) scsi cdrom support _on_
> > 	(c) scsi generic support _on_
> > 
> > (2) So we can read the cdrom with the expected device	
> > 	ln -s /dev/sr0 /dev/cdrom
> > 
> > (3) For writing to the cdrom, use device /dev/sg0  (or, on some systems,
> > /dev/scd0)
> > 
> > If set up this way, it is not necessary to pass 'hdx=ide-scsi' to the
> kernel
> > at boot. The messages at boot will include something like this:
> > 
> >  hdc: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive
> >   <snip>
> >  SCSI subsystem driver Revision: 1.00
> >  scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> >     Vendor: LITE-ON   Model: LTR-12101B        Rev: LS3B
> >     Type:   CD-ROM                             ANSI SCSI revision: 02
> >  Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> >  Uniform CD-ROM driver Revision: 3.12
> >  sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/f
> > 
> > indicating that scsi driver "got it". You won't be able to use (or need)
> the
> > /dev/hdc device.
> > 
> > -Ted
> > 
> > 
> > 
> > 
> > On 02 Dec 2002 01:43:29 -0700
> > Kim Lux <lux at diesel-research.com> wrote:
> > 
> > > Hi people
> > > 
> > > Disclaimer: I'm a linux newbie.  Some of this may be incorrect. 
> > > 
> > > I spent a good day troubleshooting cdparanoia crashing my RH8 linux
> > > install.  I traced the problem to a conflict between two kernel options
> > > involving SCSI operation of an IDE/ATAPI CDROM drive. 
> > > 
> > > Related posts: "What is the difference between /dev/sg0, /dev/scd0..."
> > > and
> > > "cdparanoia crashes linx, hdd loses interrupt, can't kill process" 
> > > These
> > > posts were made to linux.redhat, etc. over the weekend. 
> > > 
> > > Background Info
> > > 
> > > Frequently, certain CDROM applications ie cdparanoia and cd burning
> > > require
> > > SCSI access to an IDE/ATAPI CDROM device because it offers a richer set
> > > of features
> > > to control it.
> > > 
> > > The default manner of CDROM control in a stock Linux kernel is via the
> > > ATAPI interface.  In fact, it appears to me that unless the ATAPI
> > > interface is turned off as a kernel option, the CDROM drive will be
> > > accessed
> > > this way no matter what options might be selected elsewhere. (Ie: grub
> > > and
> > > lilo)
> > > 
> > > Symptoms Of a IDE/ATAPI SCSI CDROM Problem
> > > 
> > > - linux crashes or becomes unresponsive when accessing the CDROM
> > > - the message "hdx lost interrupt" appears (x = CDROM drive)
> > > - CDROM applications hang
> > > - improper operation of the CDROM in general
> > > - your operation require SCSI CDROM access
> > > - a dirty dmesg printout after CDROM operation
> > > - the process using the CDROM won't kill after crashing
> > > 
> > > Root Problem
> > > 
> > > IDE-ATAPI CDROM operation becomes unstable under SCSI emulation if both
> > > of the following options are
> > > selected:
> > > 
> > > a) SCSI CDROM Support
> > > b) IDE-SCSI Emulation
> > > 
> > > SCSI CDROM support is enabled to allow the use of a true SCSI CDROM
> > > IDE-SCSI Emulation is enabled to allow Linux to emulate a SCSI CDROM
> > > when
> > > accessing an IDE CDROM.
> > > 
> > > WARNING: There may be more to this issue than resolving these two
> > > options.
> > > My CDROM works OK with these two options resolved.  Others are saying
> > > that
> > > they need to disable all the low level SCSI drivers in the kernel.    
> > > 
> > > 
> > > So... to set a CDROM up for SCSI access, one should perform the
> > > following:
> > > 
> > > a) check that the line hdx=ide-scsi appears in your boot loader (ie lilo
> > > or
> > > grup.) x = the position of the cdrom drive ie hda for primary master,
> > > hdb
> > > for primary slave, hdc for secondary master, etc.  This line will
> > > request
> > > that linux operate the CDROM in SCSI emulation mode 
> > > 
> > > b) in the kernel options, the ATAPI CDROM support MUST be turned OFF. 
> > > This option is selected under ATA/IDE/MFM/RLL Support-> ATA/IDE.. Block
> > > Devices-> Include IDE/ATAPI CDROM Support.  Turning this option off will
> > > force Linux to access the CDROM by another method. 
> > > 
> > > c) in the kernel options, in the same area, SCSI Emulation Support must
> > > be
> > > turned ON.  This allows Linux to access the EDI/ATAPI CDROM via the SCSI
> > > emulation interface.  
> > > 
> > > d) in the kernel options, Under SCSI Support, turn off SCSI CDROM
> > > Support.
> > >  SCSI CDROM Support is used to access a real SCSI CDROM.       
> > > 
> > > e) in /dev/, set the /cdrom link to point to /hdd.  Actually I am not
> > > sure
> > > about this.
> > > 
> > > f) It might or might not help to disable autorun or at least disable the
> > > CDROM player application from attempting to control the CDROM device. 
> > > 
> > > I hope this helps someone. 
> > > 
> > > Nobody
> > > 
> > > --- >8 ----
> > > List archives:  http://www.xiph.org/archives/
> > > Paranoia homepage: http://www.xiph.org/paranoia/
> > > To unsubscribe from this list, send a message to
> > 'paranoia-request at xiph.org'
> > > containing only the word 'unsubscribe' in the body.  No subject is
> needed.
> > > Unsubscribe messages sent to the list will be ignored/filtered.
> > --- >8 ----
> > List archives:  http://www.xiph.org/archives/
> > Paranoia homepage: http://www.xiph.org/paranoia/
> > To unsubscribe from this list, send a message to
> 'paranoia-request at xiph.org'
> > containing only the word 'unsubscribe' in the body.  No subject is needed.
> > Unsubscribe messages sent to the list will be ignored/filtered.
> > 
> --- >8 ----
> List archives:  http://www.xiph.org/archives/
> Paranoia homepage: http://www.xiph.org/paranoia/
> To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
> containing only the word 'unsubscribe' in the body.  No subject is needed.
> Unsubscribe messages sent to the list will be ignored/filtered.
> 
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.