[paranoia] Re: Problems with cdparanoia

Sun Dec 1 21:41:59 PST 2002


[krlux at h68-146-142-19 krlux]$ dmesg
000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
512MB LOWMEM available.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1659.627 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3316.12 BogoMIPS
Memory: 516048k/524288k available (1236k kernel code, 7852k reserved,
452k data, 124k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU:             Common caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS735
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y060L0, ATA DISK drive
hdd: CREATIVE CD2423E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02f0d64, I/O limit 4095Mb (mask 0xffffffff)
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63,
UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 128k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 124k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router pirq escape (99)
SiS router pirq escape (99)
usb-ohci.c: USB OHCI at membase 0xe0848000, IRQ 10
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:02.2
PCI: Sharing IRQ 5 with 00:0f.0
usb-ohci.c: USB OHCI at membase 0xe084a000, IRQ 5
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1024120k swap-space (priority -1)
hub.c: new USB device 00:02.2-1, assigned address 2
: USB HID v1.10 Joystick [Logitech WingMan Attack 2] on usb2:2.0
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: CREATIVE  Model: CD2423E  NC102    Rev: 1.02
  Type:   CD-ROM                             ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, Lexmark International Lexmark Optra S 1855
ip_tables: (C) 2000-2002 Netfilter core team
sis900.c: v1.08.06 9/24/2002
PCI: Assigned IRQ 5 for device 00:03.0
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 5, 00:07:95:31:18:04.
eth0: Media Link On 10mbps half-duplex
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, Lexmark International Lexmark Optra S 1855
lp0: using parport0 (polling).
lp0: console ready
Creative EMU10K1 PCI Audio Driver, version 0.20, 10:48:48 Nov 30 2002
PCI: Found IRQ 5 for device 00:0f.0
PCI: Sharing IRQ 5 with 00:02.2
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xd400-0xd41f, IRQ 5
ac97_codec: AC97 Audio codec, id: EMC40(Unknown)
emu10k1: SBLive! 5.1 card detected
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 2x/20x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
scsi : aborting command due to timeout : pid 7675, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
hdd: lost interrupt
hdd: lost interrupt
scsi : aborting command due to timeout : pid 7677, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
hdd: lost interrupt
hdd: lost interrupt
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8558, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
hdd: lost interrupt
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 8559, scsi0, channel 0, id
0, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 8559) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
[krlux at h68-146-142-19 krlux]$

-- 
Kim Lux <lux at diesel-research.com>
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.