[paranoia] cdparanoia output

[Peter Marschall]

Hi Monty,

when doing a "cdparanoia -d /dev/scd1 -v -w 1 Track1.wav" unter Linux
2.2.14 on the first slot of my Nakamichi MJ-5.16S SCSI cdrom changer, I
get the following output (and since it says, you want it, you get it
;-))):

cdparanoia III release 9.7 (December 13, 1999)
(C) 1999 Monty <monty at xiph.org> and Xiphophorus

Report bugs to paranoia at xiph.org
http://www.xiph.org/paranoia/

Checking /dev/scd1 for cdrom...
        Testing /dev/scd1 for cooked ioctl() interface
                /dev/scd1 is not a cooked ioctl CDROM.
        Testing /dev/scd1 for SCSI interface
                generic device: /dev/sg4
                ioctl device: /dev/scd1
                CDROM sensed: NAKAMICH MJ-5.16S 1.02

Checking for SCSI emulation and transport revision...
        Drive is SCSI

Checking for MMC style command set...
        Drive is MMC, but reports CDDA incapable.
        It will likely not be able to read audio data.
Verifying CDDA command set...
        Expected command set FAILED!

        Performing full probe for CDDA command set...
        test -> density: [none    ]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [be 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d4(12)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(12)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d5 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d5 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [d8 0x,00]
                Command set FOUND!
                (please email a copy of this output to
paranoia at xiph.org)
This command set may use a Force Unit Access bit.
Checking drive for FUA bit support...
        Drive rejected FUA bit.

Besides that, everything works fine: I can grab tracks from that drive
without any problems (look at a sample progress line):
  (== PROGRESS == [  --  ----  -----  - -----   -| 010369 00 ] == :^D *
==)

Yours
Peter

PS: cdparanoia is a great piece of software !

-- 
Peter Marschall     |   eMail: peter.marschall at mayn.de
Scheffelstraße 15   |          peter.marschall at gedos.de
97072 Würzburg      |   Tel:   0931/14721
PGP:  D7 FF 20 FE E6 6B 31 74  D1 10 88 E0 3C FE 28 35

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.