[paranoia] cdparanoia output

[Sean Johnson]

The program said to send this output to your email address .... so here
you go (I have a SCSI Yamaha CDRW 4206t):

Checking /dev/cdrom for cdrom...
        Testing /dev/cdrom for cooked ioctl() interface
                /dev/scd1 is not a cooked ioctl CDROM.
        Testing /dev/cdrom for SCSI interface
                generic device: /dev/sg1
                ioctl device: /dev/scd1
                CDROM sensed: MATSHITA CD-ROM CR-508 XS03 

Checking for SCSI emulation and transport revision...
        Drive is SCSI

Checking for MMC style command set...
        Drive does not have MMC CDDA support
Verifying CDDA command set...
        Expected command set FAILED!
        Performing full probe for CDDA command set...
        test -> density: [none    ]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x04]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(12)0x]
                Command set FOUND!
                (please email a copy of this output to
paranoia at xiph.org)
This command set may use a Force Unit Access bit.
Checking drive for FUA bit support...
        Drive rejected FUA bit.

Looking at revision of the SG interface in use...
        New style SG with scatter/gather memory management
        DMA scatter/gather table entries: 50
        table entry size: 32768 bytes
        maximum theoretical transfer: 696 sectors
        Setting default read size to 13 sectors (30576 bytes).

Attempting to determine drive endianness from data.......
        Data appears to be coming back little endian.
        certainty: 100%

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to 'paranoia-request at xiph.org'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.