<br><font size=2 face="sans-serif">Hi,</font>
<br><font size=2 face="sans-serif">I've recently successful built and run
CELT under Windows using &quot;testcelt.c&quot; example file. Since I'm
about to port it on a embedded platform i activated the FIXED_POINT #define.</font>
<br><font size=2 face="sans-serif">I included fixed_generic.h and without
other changes to the code i tried to encode and decode the same file i
previously used.</font>
<br><font size=2 face="sans-serif">The output though is completely saturated
i.e. it jumps from -32768 to +32767.</font>
<br><font size=2 face="sans-serif">I then tried decoding an encoded in
floating point mode file with a fixed point decoder and the other way around.
Both are not working.</font>
<br><font size=2 face="sans-serif">I'm using CELT 0.7.1.</font>
<br><font size=2 face="sans-serif">It shouldn't be relevant but the source
file is <br>
freq: 32000<br>
channels: 1</font>
<br><font size=2 face="sans-serif">frame_size = 256 </font>
<br><font size=2 face="sans-serif">bytes_per_packet = 64.</font>
<br>
<br><font size=2 face="sans-serif">Has anybody had my same problem? Any
suggestion?</font>
<br><font size=2 face="sans-serif">Thanks</font>
<br>
<br><font size=2 face="sans-serif">Regards</font>
<br><font size=2 face="sans-serif">Riccardo<br>
</font>
<table>
<tr>
<td>
<hr noshade>
<p><font size=1 face="Arial">Riccardo Micci<br>
Senior DSP Engineer, Wireless Group </font>
<p><font size=1 color=#4181c0 face="Arial"><b>Cambridge Consultants</b></font><font size=1 face="Arial"><br>
Science Park, Milton Road <br>
Cambridge, CB4 0DW, England<br>
Switchboard: +44 (0)1223 420024<br>
Direct dial: +44 (0)1223 392402<br>
Mobile: +44 (0)<br>
Fax: +44 (0)1223 423373</font><font size=1 color=blue face="Arial"><br>
</font><a href=mailto:riccardo.micci@cambridgeconsultants.com><font size=1 color=#4181c0 face="Arial">riccardo.micci@cambridgeconsultants.com</font></a><font size=1 color=blue face="Arial"><br>
</font><a href=http://www.cambridgeconsultants.com/><font size=1 color=#4181c0 face="Arial">www.CambridgeConsultants.com</font></a><font size=1 face="Arial"><br>
 &nbsp;</font></table>
<br><font size=3 face="sans-serif"><br>
</font>
<br><font size=3 face="sans-serif"><br>
</font>
<hr><font size=1 face="Arial"><br>
<br>
This email is from Cambridge Consultants Limited, Science Park, Milton
Road, Cambridge CB4 0DW with registered number 1036298 England. It may
contain confidential information. It is intended for the addressee only
and may not be copied or disclosed to any third party without our permission.
If you are not the intended recipient please contact the sender as soon
as possible and delete the material from any computer. If this email has
been sent as a personal message to the addressee, the sender is not acting
in his/her capacity as an employee or officer of Cambridge Consultants
Limited and no liability is accepted for the content of any such email.
Outgoing email may be monitored for the purpose of ensuring compliance
with our email policy and relevant laws.</font><font size=3 face="sans-serif"><br>
</font>
<br>
<br>