From 19suomi48 at gmail.com  Mon Oct  7 23:51:27 2019
From: 19suomi48 at gmail.com (Paul R. Davis)
Date: Mon, 7 Oct 2019 19:51:27 -0400
Subject: [Icecast] Newbie
Message-ID: <CAGrRO=X6f95cVH+RGT8K6Oe+as=Af5jnUMzzn+ZUMOVtyjX5Dw@mail.gmail.com>

I am using Winamp, Icecast2 Server, and Edcast.  I believe I have set these
up properly so that I can set up and broadcast an internet radio station.

These are the links I used to help me:

https://www.pcworld.com/article/190705/start_your_own_internet_radio_station_for_free.html

https://www.fastserv.com/kb/article/edcast_winamp_-_easy_steps_to_streaming_to_icecast_or_shoutcast/

http://icecast.org/docs/icecast-2.4.1/

Also, here is my icecast.xml file:

<icecast>
    <!-- location and admin are two arbitrary strings that are e.g. visible
         on the server info page of the icecast web interface
         (server_version.xsl). -->
    <location>Earth</location>
    <admin>paavo</admin>

    <!-- This is the hostname other people will use to connect to your
server.
         It affects mainly the urls generated by Icecast for playlists and
yp
         listings. You MUST configure it properly for YP listings to work!
    -->
    <hostname>71.115.185.54</hostname>

    <!-- IMPORTANT!
         Especially for inexperienced users:
         Start out by ONLY changing all passwords and restarting Icecast.
         For detailed setup instructions please refer to the documentation.
         It's also available here: http://icecast.org/docs/
    -->

    <limits>
        <clients>100</clients>
        <sources>2</sources>
        <queue-size>524288</queue-size>
        <client-timeout>30</client-timeout>
        <header-timeout>15</header-timeout>
        <source-timeout>10</source-timeout>
        <!-- If enabled, this will provide a burst of data when a client
             first connects, thereby significantly reducing the startup
             time for listeners that do substantial buffering. However,
             it also significantly increases latency between the source
             client and listening client.  For low-latency setups, you
             might want to disable this. -->
        <burst-on-connect>1</burst-on-connect>
        <!-- same as burst-on-connect, but this allows for being more
             specific on how much to burst. Most people won't need to
             change from the default 64k. Applies to all mountpoints  -->
        <burst-size>65535</burst-size>
    </limits>

    <authentication>
        <!-- Sources log in with username 'source' -->
        <source-password>freddie1948</source-password>
        <!-- Relays log in with username 'relay' -->
        <relay-password>donna1951</relay-password>

        <!-- Admin logs in with the username given below -->
        <admin-user>paavo</admin-user>
        <admin-password>suomi48</admin-password>
    </authentication>

    <!-- set the mountpoint for a shoutcast source to use, the default if
not
         specified is /stream but you can change it here if an alternative
is
         wanted or an extension is required
    <shoutcast-mount>/live.nsv</shoutcast-mount>
    -->

    <!-- Uncomment this if you want directory listings -->
    <!--
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
    </directory>
    -->

    <!-- You may have multiple <listener> elements -->
    <listen-socket>
        <port>8000</port>
        <!-- <bind-address>127.0.0.1</bind-address> -->
        <!-- <shoutcast-mount>/stream</shoutcast-mount> -->
    </listen-socket>
    <!--
    <listen-socket>
        <port>8080</port>
    </listen-socket>
    -->
    <!--
    <listen-socket>
        <port>8443</port>
        <ssl>1</ssl>
    </listen-socket>
    -->


    <!-- Global header settings
         Headers defined here will be returned for every HTTP request to
Icecast.

         The ACAO header makes Icecast public content/API by default
         This will make streams easier embeddable (some HTML5 functionality
needs it).
         Also it allows direct access to e.g. /status-json.xsl from other
sites.
         If you don't want this, comment out the following line or read up
on CORS.
    -->
    <http-headers>
        <header name="Access-Control-Allow-Origin" value="*" />
    </http-headers>


    <!-- Relaying
         You don't need this if you only have one server.
         Please refer to the config for a detailed explanation.
    -->
    <!--<master-server>127.0.0.1</master-server>-->
    <!--<master-server-port>8001</master-server-port>-->
    <!--<master-update-interval>120</master-update-interval>-->
    <!--<master-password>mikey</master-password>-->

    <!-- setting this makes all relays on-demand unless overridden, this is
         useful for master relays which do not have <relay> definitions
here.
         The default is 0 -->
    <!--<relays-on-demand>1</relays-on-demand>-->

    <!--
    <relay>
        <server>127.0.0.1</server>
        <port>8080</port>
        <mount>/example.ogg</mount>
        <local-mount>/different.ogg</local-mount>
        <on-demand>0</on-demand>

        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
    </relay>
    -->


    <!-- Mountpoints
         Only define <mount> sections if you want to use advanced options,
         like alternative usernames or passwords
    -->

    <!-- Default settings for all mounts that don't have a specific <mount
type="normal">.
    -->
    <!--
    <mount type="default">
        <public>0</public>
        <intro>/server-wide-intro.ogg</intro>
        <max-listener-duration>3600</max-listener-duration>
        <authentication type="url">
                <option name="mount_add" value="
http://auth.example.org/stream_start.php"/>
        </authentication>
        <http-headers>
                <header name="foo" value="bar" />
        </http-headers>
    </mount>
    -->

    <!-- Normal mounts -->
    <!--
    <mount type="normal">
        <mount-name>/example-complex.ogg</mount-name>

        <username>othersource</username>
        <password>randolph</password>

        <max-listeners>1</max-listeners>
        <dump-file>/tmp/dump-example1.ogg</dump-file>
        <burst-size>65536</burst-size>
        <fallback-mount>/example2.ogg</fallback-mount>
        <fallback-override>1</fallback-override>
        <fallback-when-full>1</fallback-when-full>
        <intro>/example_intro.ogg</intro>
        <hidden>1</hidden>
        <public>1</public>
        <authentication type="htpasswd">
                <option name="filename" value="myauth"/>
                <option name="allow_duplicate_users" value="0"/>
        </authentication>
        <http-headers>
                <header name="Access-Control-Allow-Origin" value="
http://webplayer.example.org" />
                <header name="baz" value="quux" />
        </http-headers>
    </mount>
    -->

    <!--
    <mount type="normal">
        <mount-name>/auth_example.ogg</mount-name>
        <authentication type="url">
            <option name="mount_add"       value="
http://myauthserver.net/notify_mount.php"/>
            <option name="mount_remove"    value="
http://myauthserver.net/notify_mount.php"/>
            <option name="listener_add"    value="
http://myauthserver.net/notify_listener.php"/>
            <option name="listener_remove" value="
http://myauthserver.net/notify_listener.php"/>
            <option name="headers"         value="x-pragma,x-token"/>
            <option name="header_prefix"   value="ClientHeader."/>
        </authentication>
    </mount>
    -->

    <fileserve>1</fileserve>

    <paths>
        <logdir>./log</logdir>
        <webroot>./web</webroot>
        <adminroot>./admin</adminroot>

        <!-- Aliases: treat requests for 'source' path as being for 'dest'
path
             May be made specific to a port or bound address using the
"port"
             and "bind-address" attributes.
          -->
        <!--
        <alias source="/foo" destination="/bar"/>
        -->
        <!-- Aliases: can also be used for simple redirections as well,
             this example will redirect all requests for http://server:port/
to
             the status page
        -->
        <alias source="/" destination="/status.xsl"/>
        <!-- The certificate file needs to contain both public and private
part.
             Both should be PEM encoded.
        <ssl-certificate>./icecast.pem</ssl-certificate>
        -->
    </paths>

    <logging>
        <accesslog>access.log</accesslog>
        <errorlog>error.log</errorlog>
        <!-- <playlistlog>playlist.log</playlistlog> -->
        <loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
        <logsize>10000</logsize> <!-- Max size of a logfile -->
        <!-- If logarchive is enabled (1), then when logsize is reached
             the logfile will be moved to
[error|access|playlist].log.DATESTAMP,
             otherwise it will be moved to [error|access|playlist].log.old.
             Default is non-archive mode (i.e. overwrite)
        -->
        <!-- <logarchive>1</logarchive> -->
    </logging>
</icecast>

If you can help me correct any incorrect settings so that I can broadcast,
please let me know, or direct me to the proper person/website.

Thank you.


/s/
Paul R. Davis
19suomi48 at gmail.com

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xiph.org/pipermail/icecast/attachments/20191007/fe2efc0b/attachment.htm>

From jordan at coolmic.net  Tue Oct  8 19:37:47 2019
From: jordan at coolmic.net (Jordan Erickson)
Date: Tue, 8 Oct 2019 12:37:47 -0700
Subject: [Icecast] Newbie
In-Reply-To: <CAGrRO=X6f95cVH+RGT8K6Oe+as=Af5jnUMzzn+ZUMOVtyjX5Dw@mail.gmail.com>
References: <CAGrRO=X6f95cVH+RGT8K6Oe+as=Af5jnUMzzn+ZUMOVtyjX5Dw@mail.gmail.com>
Message-ID: <88f43825-223e-a683-1ccd-424b8e20a0a5@coolmic.net>

Hi Paul,

0) You need to state what your problem is before we can help :)
1) Please obfuscate user credentials (and hostnames if desired)
otherwise people will have "fun" with your server ;)


Cheers,
Jordan

On 10/7/19 4:51 PM, Paul R. Davis wrote:
> I am using Winamp, Icecast2 Server, and Edcast.? I believe I have set
> these up properly so that I can set up and broadcast an internet radio
> station.?
> 
> These are the links I used to help me:
> 
> https://www.pcworld.com/article/190705/start_your_own_internet_radio_station_for_free.html
> 
> https://www.fastserv.com/kb/article/edcast_winamp_-_easy_steps_to_streaming_to_icecast_or_shoutcast/
> 
> http://icecast.org/docs/icecast-2.4.1/
> 
> Also, here is my icecast.xml file:
> 
> <icecast>
> ? ? <!-- location and admin are two arbitrary strings that are e.g. visible
> ? ? ? ? ?on the server info page of the icecast web interface
> ? ? ? ? ?(server_version.xsl). -->
> ? ? <location>Earth</location>
> ? ? <admin>paavo</admin>
> 
> ? ? <!-- This is the hostname other people will use to connect to your
> server.
> ? ? ? ? ?It affects mainly the urls generated by Icecast for playlists
> and yp
> ? ? ? ? ?listings. You MUST configure it properly for YP listings to work!
> ? ? -->
> ? ? <hostname>71.115.185.54</hostname>
> 
> ? ? <!-- IMPORTANT!
> ? ? ? ? ?Especially for inexperienced users:
> ? ? ? ? ?Start out by ONLY changing all passwords and restarting Icecast.
> ? ? ? ? ?For detailed setup instructions please refer to the documentation.
> ? ? ? ? ?It's also available here: http://icecast.org/docs/
> ? ? -->
> 
> ? ? <limits>
> ? ? ? ? <clients>100</clients>
> ? ? ? ? <sources>2</sources>
> ? ? ? ? <queue-size>524288</queue-size>
> ? ? ? ? <client-timeout>30</client-timeout>
> ? ? ? ? <header-timeout>15</header-timeout>
> ? ? ? ? <source-timeout>10</source-timeout>
> ? ? ? ? <!-- If enabled, this will provide a burst of data when a client
> ? ? ? ? ? ? ?first connects, thereby significantly reducing the startup
> ? ? ? ? ? ? ?time for listeners that do substantial buffering. However,
> ? ? ? ? ? ? ?it also significantly increases latency between the source
> ? ? ? ? ? ? ?client and listening client.? For low-latency setups, you
> ? ? ? ? ? ? ?might want to disable this. -->
> ? ? ? ? <burst-on-connect>1</burst-on-connect>
> ? ? ? ? <!-- same as burst-on-connect, but this allows for being more
> ? ? ? ? ? ? ?specific on how much to burst. Most people won't need to
> ? ? ? ? ? ? ?change from the default 64k. Applies to all mountpoints ?-->
> ? ? ? ? <burst-size>65535</burst-size>
> ? ? </limits>
> 
> ? ? <authentication>
> ? ? ? ? <!-- Sources log in with username 'source' -->
> ? ? ? ? <source-password>freddie1948</source-password>
> ? ? ? ? <!-- Relays log in with username 'relay' -->
> ? ? ? ? <relay-password>donna1951</relay-password>
> 
> ? ? ? ? <!-- Admin logs in with the username given below -->
> ? ? ? ? <admin-user>paavo</admin-user>
> ? ? ? ? <admin-password>suomi48</admin-password>
> ? ? </authentication>
> 
> ? ? <!-- set the mountpoint for a shoutcast source to use, the default
> if not
> ? ? ? ? ?specified is /stream but you can change it here if an
> alternative is
> ? ? ? ? ?wanted or an extension is required
> ? ? <shoutcast-mount>/live.nsv</shoutcast-mount>
> ? ? -->
> 
> ? ? <!-- Uncomment this if you want directory listings -->
> ? ? <!--
> ? ? <directory>
> ? ? ? ? <yp-url-timeout>15</yp-url-timeout>
> ? ? ? ? <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
> ? ? </directory>
> ? ? -->
> 
> ? ? <!-- You may have multiple <listener> elements -->
> ? ? <listen-socket>
> ? ? ? ? <port>8000</port>
> ? ? ? ? <!-- <bind-address>127.0.0.1</bind-address> -->
> ? ? ? ? <!-- <shoutcast-mount>/stream</shoutcast-mount> -->
> ? ? </listen-socket>
> ? ? <!--
> ? ? <listen-socket>
> ? ? ? ? <port>8080</port>
> ? ? </listen-socket>
> ? ? -->
> ? ? <!--
> ? ? <listen-socket>
> ? ? ? ? <port>8443</port>
> ? ? ? ? <ssl>1</ssl>
> ? ? </listen-socket>
> ? ? -->
> 
> 
> ? ? <!-- Global header settings
> ? ? ? ? ?Headers defined here will be returned for every HTTP request to
> Icecast.
> 
> ? ? ? ? ?The ACAO header makes Icecast public content/API by default
> ? ? ? ? ?This will make streams easier embeddable (some HTML5
> functionality needs it).
> ? ? ? ? ?Also it allows direct access to e.g. /status-json.xsl from
> other sites.
> ? ? ? ? ?If you don't want this, comment out the following line or read
> up on CORS.
> ? ? -->
> ? ? <http-headers>
> ? ? ? ? <header name="Access-Control-Allow-Origin" value="*" />
> ? ? </http-headers>
> 
> 
> ? ? <!-- Relaying
> ? ? ? ? ?You don't need this if you only have one server.
> ? ? ? ? ?Please refer to the config for a detailed explanation.
> ? ? -->
> ? ? <!--<master-server>127.0.0.1</master-server>-->
> ? ? <!--<master-server-port>8001</master-server-port>-->
> ? ? <!--<master-update-interval>120</master-update-interval>-->
> ? ? <!--<master-password>mikey</master-password>-->
> 
> ? ? <!-- setting this makes all relays on-demand unless overridden, this is
> ? ? ? ? ?useful for master relays which do not have <relay> definitions
> here.
> ? ? ? ? ?The default is 0 -->
> ? ? <!--<relays-on-demand>1</relays-on-demand>-->
> 
> ? ? <!--
> ? ? <relay>
> ? ? ? ? <server>127.0.0.1</server>
> ? ? ? ? <port>8080</port>
> ? ? ? ? <mount>/example.ogg</mount>
> ? ? ? ? <local-mount>/different.ogg</local-mount>
> ? ? ? ? <on-demand>0</on-demand>
> 
> ? ? ? ? <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
> ? ? </relay>
> ? ? -->
> 
> 
> ? ? <!-- Mountpoints
> ? ? ? ? ?Only define <mount> sections if you want to use advanced options,
> ? ? ? ? ?like alternative usernames or passwords
> ? ? -->
> 
> ? ? <!-- Default settings for all mounts that don't have a specific
> <mount type="normal">.
> ? ? -->
> ? ? <!--
> ? ? <mount type="default">
> ? ? ? ? <public>0</public>
> ? ? ? ? <intro>/server-wide-intro.ogg</intro>
> ? ? ? ? <max-listener-duration>3600</max-listener-duration>
> ? ? ? ? <authentication type="url">
> ? ? ? ? ? ? ? ? <option name="mount_add"
> value="http://auth.example.org/stream_start.php"/>
> ? ? ? ? </authentication>
> ? ? ? ? <http-headers>
> ? ? ? ? ? ? ? ? <header name="foo" value="bar" />
> ? ? ? ? </http-headers>
> ? ? </mount>
> ? ? -->
> 
> ? ? <!-- Normal mounts -->
> ? ? <!--
> ? ? <mount type="normal">
> ? ? ? ? <mount-name>/example-complex.ogg</mount-name>
> 
> ? ? ? ? <username>othersource</username>
> ? ? ? ? <password>randolph</password>
> 
> ? ? ? ? <max-listeners>1</max-listeners>
> ? ? ? ? <dump-file>/tmp/dump-example1.ogg</dump-file>
> ? ? ? ? <burst-size>65536</burst-size>
> ? ? ? ? <fallback-mount>/example2.ogg</fallback-mount>
> ? ? ? ? <fallback-override>1</fallback-override>
> ? ? ? ? <fallback-when-full>1</fallback-when-full>
> ? ? ? ? <intro>/example_intro.ogg</intro>
> ? ? ? ? <hidden>1</hidden>
> ? ? ? ? <public>1</public>
> ? ? ? ? <authentication type="htpasswd">
> ? ? ? ? ? ? ? ? <option name="filename" value="myauth"/>
> ? ? ? ? ? ? ? ? <option name="allow_duplicate_users" value="0"/>
> ? ? ? ? </authentication>
> ? ? ? ? <http-headers>
> ? ? ? ? ? ? ? ? <header name="Access-Control-Allow-Origin"
> value="http://webplayer.example.org" />
> ? ? ? ? ? ? ? ? <header name="baz" value="quux" />
> ? ? ? ? </http-headers>
> ? ? </mount>
> ? ? -->
> 
> ? ? <!--
> ? ? <mount type="normal">
> ? ? ? ? <mount-name>/auth_example.ogg</mount-name>
> ? ? ? ? <authentication type="url">
> ? ? ? ? ? ? <option name="mount_add" ? ? ?
> value="http://myauthserver.net/notify_mount.php"/>
> ? ? ? ? ? ? <option name="mount_remove" ?
> ?value="http://myauthserver.net/notify_mount.php"/>
> ? ? ? ? ? ? <option name="listener_add" ?
> ?value="http://myauthserver.net/notify_listener.php"/>
> ? ? ? ? ? ? <option name="listener_remove"
> value="http://myauthserver.net/notify_listener.php"/>
> ? ? ? ? ? ? <option name="headers" ? ? ? ? value="x-pragma,x-token"/>
> ? ? ? ? ? ? <option name="header_prefix" ? value="ClientHeader."/>
> ? ? ? ? </authentication>
> ? ? </mount>
> ? ? -->
> 
> ? ? <fileserve>1</fileserve>
> 
> ? ? <paths>
> ? ? ? ? <logdir>./log</logdir>
> ? ? ? ? <webroot>./web</webroot>
> ? ? ? ? <adminroot>./admin</adminroot>
> 
> ? ? ? ? <!-- Aliases: treat requests for 'source' path as being for
> 'dest' path
> ? ? ? ? ? ? ?May be made specific to a port or bound address using the
> "port"
> ? ? ? ? ? ? ?and "bind-address" attributes.
> ? ? ? ? ? -->
> ? ? ? ? <!--
> ? ? ? ? <alias source="/foo" destination="/bar"/>
> ? ? ? ? -->
> ? ? ? ? <!-- Aliases: can also be used for simple redirections as well,
> ? ? ? ? ? ? ?this example will redirect all requests for
> http://server:port/ to
> ? ? ? ? ? ? ?the status page
> ? ? ? ? -->
> ? ? ? ? <alias source="/" destination="/status.xsl"/>
> ? ? ? ? <!-- The certificate file needs to contain both public and
> private part.
> ? ? ? ? ? ? ?Both should be PEM encoded.
> ? ? ? ? <ssl-certificate>./icecast.pem</ssl-certificate>
> ? ? ? ? -->
> ? ? </paths>
> 
> ? ? <logging>
> ? ? ? ? <accesslog>access.log</accesslog>
> ? ? ? ? <errorlog>error.log</errorlog>
> ? ? ? ? <!-- <playlistlog>playlist.log</playlistlog> -->
> ? ? ? ? <loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
> ? ? ? ? <logsize>10000</logsize> <!-- Max size of a logfile -->
> ? ? ? ? <!-- If logarchive is enabled (1), then when logsize is reached
> ? ? ? ? ? ? ?the logfile will be moved to
> [error|access|playlist].log.DATESTAMP,
> ? ? ? ? ? ? ?otherwise it will be moved to [error|access|playlist].log.old.
> ? ? ? ? ? ? ?Default is non-archive mode (i.e. overwrite)
> ? ? ? ? -->
> ? ? ? ? <!-- <logarchive>1</logarchive> -->
> ? ? </logging>
> </icecast>
> 
> If you can help me correct any incorrect settings so that I can
> broadcast, please let me know, or direct me to the proper person/website.
> 
> Thank you.
> 
> 
> /s/
> Paul R. Davis
> 19suomi48 at gmail.com <mailto:19suomi48 at gmail.com>
> 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> 	Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> 
> 
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> 
> _______________________________________________
> Icecast mailing list
> Icecast at xiph.org
> http://lists.xiph.org/mailman/listinfo/icecast
> 

-- 
Jordan Erickson (PGP: 0x78DD41CB)
Logical Networking Solutions, 707-636-5678


From mvandop at xs4all.nl  Fri Oct 18 07:46:08 2019
From: mvandop at xs4all.nl (Michel van Dop)
Date: Fri, 18 Oct 2019 09:46:08 +0200
Subject: [Icecast] Icecast mountpoint limits?
Message-ID: <67d652e9065fa16aac6b881fc8123844@xs4all.nl>

Hi, 

For a project i want to now if there is limit of mountpoints for one
streaming account?
For every listener we need a new stream (mountpoint). Is there a limit?
Can we go on Centos 7 64bit 4 Gb memory 1 core (2,6Ghz) to 500 or 1000
mountpoints?

Best regards,
Michel van Dop

--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xiph.org/pipermail/icecast/attachments/20191018/8d59c2d4/attachment.htm>

From artuch at speedy.com.ar  Wed Oct 23 18:03:03 2019
From: artuch at speedy.com.ar (=?ISO-8859-1?Q?Jos=E9?= Luis Artuch)
Date: Wed, 23 Oct 2019 15:03:03 -0300
Subject: [Icecast] compile Icecast 2.4.4 with Open SSL?
In-Reply-To: <1541341571.2376.2.camel@speedy.com.ar>
References: <3c45ece6-88e1-7c00-b278-0be3d852c328@googe.tv>
 <ecdfd2d7-7f49-1fd2-7735-8cccdcda02f5@ruecker.fi>
 <1541341571.2376.2.camel@speedy.com.ar>
Message-ID: <d47176b9c35daefaeb920d4fcad60b863f06d490.camel@speedy.com.ar>

Hi,

I have followed:
https://wiki.xiph.org/Icecast_Server/Installing_latest_version_(official_Xiph_repositories)

So, I have managed to run Icecast2 with SSL support in Debian 9 for a
long time.

But now I am not achieving SSL support in Debian 10.
Is there a special library that is required and must be previously
installed ?. I have installed libxslt1-dev, libxml2-dev, libcurl4-
openssl-dev, libssl-dev, libtheora-dev, libogg-dev, libvorbis-dev, icu-
devtools, libicu-dev, libflac-dev, libspeex-dev, libshout3-dev and pkg-
config, but still without good luck.

In addition, I am working with files from xiph.org in the *Debian 9.0
(stretch)* directory, because some file (Release ?) is missing in the
*Debian Testing* directory.

I would appreciate any help on this topic.
Best regards.
Jos? Luis

El dom, 04-11-2018 a las 11:26 -0300, Jos? Luis Artuch escribi?:
> El vie, 02-11-2018 a las 11:46 +0000, Thomas B. R?cker escribi?:
> > Hi,
> > 
> > On 11/01/2018 07:29 PM, Googe wrote:
> > > How do I compile Icecast 2.4.4 with openssl support?
> > 
> > Usually that question comes from Ubuntu or Debian users.
> > In which case we recommend:
> > https://wiki.xiph.org/Icecast_Server/Installing_latest_version_(offic
> > ial_Xiph_repositories)
> > Those official Xiph.org packages are built against openSSL.
> Thanks Thomas, finally !!
> > If you are on some unrelated distribution, all you need to ensure
> > is
> > the
> > openSSL headers are installed.
> > 
> > Br,
> > 
> > TBR
> > _______________________________________________
> > Icecast mailing list
> > Icecast at xiph.org
> > http://lists.xiph.org/mailman/listinfo/icecast