[Icecast] Procedure to Install Icecast 2.4.2 in Linux

Tue Nov 3 04:53:07 UTC 2015

Good morning,

On Mon, 2015-11-02 at 20:58 -0500, Jeremiah Rogers wrote:
> Thank's Philipp and Dmitrijs. That got it fixed. I just pointed the
> web and admin settings where they belong and all's working great.
> Thanks for the sighup help, Dmitrijs.

Nice to hear that you got it fixed.

Have a nice day!

> Jeremiah Rogers
> Cell: 704-996-5334
> Email: jeremiahzrogers at gmail.com
> Social Networking: /jzrogers
> 
> 
> > On Nov 2, 2015, at 08:35, Philipp Schafft <lion at lion.leolix.org> wrote:
> > 
> > Good afternoon,
> > 
> >> On Mon, 2015-11-02 at 07:19 -0500, Jeremiah Rogers wrote:
> >> Sorry to reply to myself. The message says "could not parse xslt".
> > 
> > Ok. Please have a look at the config file (icecast*.xml). In the <paths>
> > section there should be a <webroot> as well as a <adminroot> setting. Do
> > those point to existing directories with some *.xsl in them?
> > 
> > Another litte hint: apt-get install --reinstall ...
> > 
> > Have a nice day!
> > 
> >> Jeremiah Rogers
> >> Cell: 704-996-5334
> >> Email: jeremiahzrogers at gmail.com
> >> Social Networking: /jzrogers
> >> 
> >> 
> >>> On Nov 2, 2015, at 05:51, Jeremiah Rogers <jeremiahzrogers at gmail.com> wrote:
> >>> 
> >>> Hello Philipp. Thanks so much for the educatin about why not to build myself.
> >>> 
> >>> The error I was getting, from a browser when I tried to open the URL to my machine running Icecast, was a 404 error and a message that it couldn't find the XSLT files. I'll install the packaged build again later today and provide you exact error text, but I remember it saying it couldn't find or process the XSLT.
> >>> 
> >>> Would it be helpful for me to do an apt-get download icecast2 and somehow provide the resulting download to someone off-list so they can see what I got?
> >>> 
> >>> Jeremiah Rogers
> >>> Cell: 704-996-5334
> >>> Email: jeremiahzrogers at gmail.com
> >>> Social Networking: /jzrogers
> >>> 
> >>> 
> >>>> On Nov 2, 2015, at 02:17, Philipp Schafft <lion at lion.leolix.org> wrote:
> >>>> 
> >>>> Good morning,
> >>>> 
> >>>>> On Sun, 2015-11-01 at 18:12 -0500, Jeremiah Rogers wrote:
> >>>>> Hi all. I'm brand new to Linux and want to install Icecast 2.4.2 on Raspian.
> >>>>> 
> >>>>> I used apt-get to install Icecast 2.4.0, and the install would stream 
> >>>>> music, but none of the status or admin pages would work. I ran the 
> >>>>> install by typing sudo apt-get install icecast2 from ~.
> >>>> 
> >>>> Ok, that sounds right.
> >>>> 
> >>>> What error message you get when accessing those pages?
> >>>> 
> >>>> 
> >>>>> I thought I might get better results if I built and installed myself. 
> >>>>> Anyone able to provide step-by-step instructions to unpack and build 
> >>>>> from the tar.gz, or point me to a good tutorial online for doing such? 
> >>>>> In particular, which directory should I be in to initiate the work? Do I 
> >>>>> need to use sudo? Once installed, what do I do to make it run on system 
> >>>>> boot? I will be running this install from a fresh image. Thanks!
> >>>> 
> >>>> I very much recommend against installing stuff from source. This is not
> >>>> so much related to Icecast2 but a general statement.
> >>>> 
> >>>> The reasons why I recommend using pre-compiled packages are as the
> >>>> following. The importance of individual aspects vary depending on your
> >>>> situation.
> >>>>    * You will not get updates. You will likely never notice that
> >>>>      there are updates out there. This is a big problem as no
> >>>>      SECURITY fixes can reach you. Thus installing stuff from source
> >>>>      can be very harmful.
> >>>>    * Most people install stuff from source without verifying the
> >>>>      source. (Or have no way to really verify it at all as they're
> >>>>      (cryptographically speaking) too far away from the source. So
> >>>>      you will run a software that may be altered on it's path to you
> >>>>      (this includes everything from simple transmission errors to
> >>>>      attacks specially targeted to you). Thus you can not trust the
> >>>>      software most of the time. Once your ran any untrusted software
> >>>>      your system must be considered compromised.
> >>>>    * The package is made to fit your system while the source is not.
> >>>>      e.g. the package usually installs scripts and helper files to
> >>>>      e.g. start a daemon on system start up or intigrate with tools
> >>>>      like logrotate. You need to do all that yourself and may or may
> >>>>      not aware of all those things. See your question above. You have
> >>>>      asked for it already so you got this point already :).
> >>>>    * If people run the package provided by the OS it's more easy to
> >>>>      handle bugs. There is a single packet that you can report bugs
> >>>>      against and the maintainer can upstream bugs or cooperate with
> >>>>      upstream in any way to solve problems. If you run your own
> >>>>      package you need to take care yourself.
> >>>>    * You waste energy. Compiling is process taking a lot of energy.
> >>>>      And there is no reason for the mass do to this as the
> >>>>      pre-compiled binaries are matching your system virtually
> >>>>      perfectly. Energy is the ONLY single one resource on this planet
> >>>>      we are RUNNING OUT OF.
> >>>> 
> >>>> So for the reasons above I would prefer to work on fixing the problem
> >>>> above and not go with source code. Plus I think you will learn a bit
> >>>> about the system that is new to you. :)
> >>>> 
> >>>> Have a nice day! Awaiting your response with the error message(s).
> >>>> 
> >>>> -- 
> >>>> Philipp.
> >>>> (Rah of PH2)
> >>>> _______________________________________________
> >>>> Icecast mailing list
> >>>> Icecast at xiph.org
> >>>> http://lists.xiph.org/mailman/listinfo/icecast
> >> _______________________________________________
> >> Icecast mailing list
> >> Icecast at xiph.org
> >> http://lists.xiph.org/mailman/listinfo/icecast
> > 
> > -- 
> > Philipp.
> > (Rah of PH2)
> > _______________________________________________
> > Icecast mailing list
> > Icecast at xiph.org
> > http://lists.xiph.org/mailman/listinfo/icecast
> _______________________________________________
> Icecast mailing list
> Icecast at xiph.org
> http://lists.xiph.org/mailman/listinfo/icecast

-- 
Philipp.
 (Rah of PH2)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.xiph.org/pipermail/icecast/attachments/20151103/009f9903/attachment.sig>