[Icecast] can't use icecast2 in ubuntu 12.04

José Luis Artuch artuch at speedy.com.ar
Wed Jul 30 16:33:40 PDT 2014


El mié, 30-07-2014 a las 23:05 +0200, Simone Dal Maso escribió:
> Hello,
> in the first listen socket, I put 8001 to make a test, generally it is always set to 8000. should I change also the second listen socket?
> 
Simone, the first 8000 and the second 8001. It's like the default.
But if it was like that before and did not work, then it should be what
Thomas says, connection blocked externally.
Regards.
José Luis
> Il giorno 30/lug/2014, alle ore 22:15, José Luis Artuch <artuch at speedy.com.ar> ha scritto:
> 
> > El mié, 30-07-2014 a las 21:41 +0200, Simone Dal Maso escribió:
> >> Hello,
> >> first of all thank you for your patience and having answered you.
> >> I tried to change port from 8000 to 8001 but nothing happened. I am
> >> using a vps server so I don’t need to open port from router.
> >> I paste here  all my icecast.xml configuration file.
> >> can you please give a llok and tell me if all seems ok to you?
> >> still thank you!
> >> ***
> > Ok Simone, you are welcome,
> > Change:
> > 	<listen-socket>
> > 		<port>8000</port>
> > Not *8001* there !!
> > Regards.
> > José Luis
> >> root at mail2:/etc/icecast2# nano icecast.xml 
> >> 
> >> 
> >>  GNU nano 2.2.6             File: icecast.xml
> >> 
> >> 
> >> 
> >> <icecast>
> >>    <limits>
> >>        <clients>100</clients>
> >>        <sources>2</sources>
> >>        <threadpool>5</threadpool>
> >>        <queue-size>524288</queue-size>
> >>        <client-timeout>30</client-timeout>
> >>        <header-timeout>15</header-timeout>
> >>        <source-timeout>10</source-timeout>
> >>        <!-- If enabled, this will provide a burst of data when a client 
> >>             first connects, thereby significantly reducing the startup 
> >>             time for listeners that do substantial buffering. However,
> >>             it also significantly increases latency between the source
> >>             client and listening client.  For low-latency setups, you
> >>             might want to disable this. -->
> >>        <burst-on-connect>1</burst-on-connect>
> >>        <!-- same as burst-on-connect, but this allows for being more
> >>             specific on how much to burst. Most people won't need to
> >>             change from the default 64k. Applies to all mountpoints  -->
> >>        <burst-size>65535</burst-size>
> >>    </limits>
> >> 
> >>    <authentication>
> >>        <!-- Sources log in with username 'source' -->
> >>        <source-password>xxx</source-password>
> >>        <!-- Relays log in username 'relay' -->
> >>        <relay-password>Abbxxx</relay-password>
> >>        <!-- Admin logs in with the username given below -->
> >>        <admin-user>admin</admin-user>
> >>        <admin-password>xxx</admin-password>
> >>    </authentication>
> >> 
> >>    <!-- set the mountpoint for a shoutcast source to use, the default if not
> >>         specified is /stream but you can change it here if an alternative is
> >>         wanted or an extension is required
> >>    <shoutcast-mount>/live.nsv</shoutcast-mount>
> >>    -->
> >> 
> >>    <!-- Uncomment this if you want directory listings -->
> >>    <!--
> >>    <directory>
> >>        <yp-url-timeout>15</yp-url-timeout>
> >>        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
> >>    </directory>
> >>     -->
> >> 
> >>    <!-- This is the hostname other people will use to connect to your server.
> >>    It affects mainly the urls generated by Icecast for playlists and yp
> >>    listings. -->
> >>    <hostname>178.79.148.185</hostname>
> >> 
> >>    <!-- You may have multiple <listener> elements -->
> >>    <listen-socket>
> >>        <port>8001</port>
> >>        <!-- <bind-address>127.0.0.1</bind-address> -->
> >>        <!-- <shoutcast-mount>/stream</shoutcast-mount> -->
> >>    </listen-socket>
> >>    <!--
> >>    <listen-socket>
> >>        <port>8001</port>
> >>    </listen-socket>
> >>    -->
> >> 
> >>    <!--<master-server>127.0.0.1</master-server>-->
> >>    <!--<master-server-port>8001</master-server-port>-->
> >>    <!--<master-update-interval>120</master-update-interval>-->
> >>    <!--<master-password>hackme</master-password>-->
> >> 
> >>    <!-- setting this makes all relays on-demand unless overridden, this is
> >>         useful for master relays which do not have <relay> definitions here.
> >>         The default is 0 -->
> >>    <!--<relays-on-demand>1</relays-on-demand>-->
> >> 
> >>    <!--
> >>    <relay>
> >>        <server>127.0.0.1</server>
> >>        <port>8001</port>
> >>        <mount>/example.ogg</mount>
> >>        <local-mount>/different.ogg</local-mount>
> >>        <on-demand>0</on-demand>
> >> 
> >>        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
> >>    </relay>
> >>    -->
> >> 
> >>    <!-- Only define a <mount> section if you want to use advanced options,
> >>         like alternative usernames or passwords
> >>    <mount>
> >>        <mount-name>/example-complex.ogg</mount-name>
> >> 
> >>        <username>othersource</username>
> >>        <password>hackmemore</password>
> >> 
> >>        <max-listeners>1</max-listeners>
> >>        <dump-file>/tmp/dump-example1.ogg</dump-file>
> >>        <burst-size>65536</burst-size>
> >>        <fallback-mount>/example2.ogg</fallback-mount>
> >>        <fallback-override>1</fallback-override>
> >>        <fallback-when-full>1</fallback-when-full>
> >>        <intro>/example_intro.ogg</intro>
> >>        <hidden>1</hidden>
> >>        <no-yp>1</no-yp>
> >>        <authentication type="htpasswd">
> >>                <option name="filename" value="myauth"/>
> >>                <option name="allow_duplicate_users" value="0"/>
> >>        </authentication>
> >>        <on-connect>/home/icecast/bin/stream-start</on-connect>
> >>        <on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
> >>    </mount>
> >> 
> >>    <mount>
> >>        <mount-name>/auth_example.ogg</mount-name>
> >>        <authentication type="url">
> >>            <option name="mount_add"       value="http://myauthserver.net/notify_mount.php"/>
> >>            <option name="mount_remove"    value="http://myauthserver.net/notify_mount.php"/>
> >>            <option name="listener_add"    value="http://myauthserver.net/notify_listener.php"/>
> >>            <option name="listener_remove" value="http://myauthserver.net/notify_listener.php"/>
> >>        </authentication>
> >>    </mount>
> >> 
> >>    -->
> >> 
> >>    <fileserve>1</fileserve>
> >> 
> >>    <paths>
> >> 		<!-- basedir is only used if chroot is enabled -->
> >>        <basedir>/usr/share/icecast2</basedir>
> >> 
> >>        <!-- Note that if <chroot> is turned on below, these paths must both
> >>             be relative to the new root, not the original root -->
> >>        <logdir>/var/log/icecast2</logdir>
> >>        <webroot>/usr/share/icecast2/web</webroot>
> >>        <adminroot>/usr/share/icecast2/admin</adminroot>
> >>        <!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->
> >> 
> >>        <!-- Aliases: treat requests for 'source' path as being for 'dest' path
> >>             May be made specific to a port or bound address using the "port"
> >>             and "bind-address" attributes.
> >>          -->
> >>        <!--
> >>        <alias source="/foo" dest="/bar"/>
> >>          -->
> >>        <!-- Aliases: can also be used for simple redirections as well,
> >>             this example will redirect all requests for http://server:port/ to
> >>             the status page
> >>          -->
> >>        <alias source="/" dest="/status.xsl"/>
> >>    </paths>
> >> 
> >>    <logging>
> >>        <accesslog>access.log</accesslog>
> >>        <errorlog>error.log</errorlog>
> >>        <!-- <playlistlog>playlist.log</playlistlog> -->
> >>      	<loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
> >>      	<logsize>10000</logsize> <!-- Max size of a logfile -->
> >>        <!-- If logarchive is enabled (1), then when logsize is reached
> >>             the logfile will be moved to [error|access|playlist].log.DATESTAMP,
> >>             otherwise it will be moved to [error|access|playlist].log.old.
> >>             Default is non-archive mode (i.e. overwrite)
> >>        -->
> >>        <!-- <logarchive>1</logarchive> -->
> >>    </logging>
> >> 
> >>    <security>
> >>        <chroot>0</chroot>
> >>        <!--
> >>        <changeowner>
> >>            <user>nobody</user>
> >>            <group>nogroup</group>
> >>        </changeowner>
> >>        -->
> >>    </security>
> >> </icecast>
> >> 
> >> 
> >> _______________________________________________
> >> Icecast mailing list
> >> Icecast at xiph.org
> >> http://lists.xiph.org/mailman/listinfo/icecast
> > 
> > 
> > _______________________________________________
> > Icecast mailing list
> > Icecast at xiph.org
> > http://lists.xiph.org/mailman/listinfo/icecast
> 
> _______________________________________________
> Icecast mailing list
> Icecast at xiph.org
> http://lists.xiph.org/mailman/listinfo/icecast




More information about the Icecast mailing list