[xiph-commits] r10214 - trunk/vorbis/doc
lu_zero at svn.xiph.org
lu_zero at svn.xiph.org
Thu Oct 20 10:21:42 PDT 2005
Author: lu_zero
Date: 2005-10-20 10:21:37 -0700 (Thu, 20 Oct 2005)
New Revision: 10214
Added:
trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.txt
trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.xml
Removed:
trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt
trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml
Log:
Changes:
Minor clarification of some passages
First usage example example
Deleted: trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt
===================================================================
--- trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt 2005-10-20 17:20:33 UTC (rev 10213)
+++ trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt 2005-10-20 17:21:37 UTC (rev 10214)
@@ -1,1288 +0,0 @@
-
-
-
-AVT Working Group L. Barbato
-Internet-Draft Xiph.Org
-Expires: April 18, 2006 October 15, 2005
-
-
- draft-ietf-avt-vorbis-rtp-01
- RTP Payload Format for Vorbis Encoded Audio
-
-Status of this Memo
-
- This document is an Internet-Draft and is subject to all provisions
- of Section 3 of RFC 3667. By submitting this Internet-Draft, each
- author represents that any applicable patent or other IPR claims of
- which he or she is aware have been or will be disclosed, and any of
- which he or she become aware will be disclosed, in accordance with
- RFC 3668.
-
- Internet-Drafts are working documents of the Internet Engineering
- Task Force (IETF), its areas, and its working groups. Note that
- other groups may also distribute working documents as Internet-
- Drafts.
-
- Internet-Drafts are draft documents valid for a maximum of six months
- and may be updated, replaced, or obsoleted by other documents at any
- time. It is inappropriate to use Internet-Drafts as reference
- material or to cite them other than as "work in progress."
-
- The list of current Internet-Drafts can be accessed at
- http://www.ietf.org/ietf/1id-abstracts.txt.
-
- The list of Internet-Draft Shadow Directories can be accessed at
- http://www.ietf.org/shadow.html.
-
- This Internet-Draft will expire on April 18, 2006.
-
-Copyright Notice
-
- Copyright (C) The Internet Society (2005).
-
-Abstract
-
- This document describes an RTP payload format for transporting Vorbis
- encoded audio. It details the RTP encapsulation mechanism for raw
- Vorbis data and details the delivery mechanisms for the decoder
- probability model, referred to as a codebook and other setup
- information.
-
- Also included within the document are the necessary details for the
-
-
-
-Barbato Expires April 18, 2006 [Page 1]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- use of Vorbis with MIME and Session Description Protocol (SDP).
-
-Editors Note
-
- All references to RFC XXXX are to be replaced by references to the
- RFC number of this memo, when published.
-
-
-Table of Contents
-
- 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
- 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
- 2. Payload Format . . . . . . . . . . . . . . . . . . . . . . . . 3
- 2.1. RTP Header . . . . . . . . . . . . . . . . . . . . . . . . 3
- 2.2. Payload Header . . . . . . . . . . . . . . . . . . . . . . 5
- 2.3. Payload Data . . . . . . . . . . . . . . . . . . . . . . . 6
- 2.4. Example RTP Packet . . . . . . . . . . . . . . . . . . . . 7
- 3. Configuration Headers . . . . . . . . . . . . . . . . . . . . 8
- 3.1. In-band Header Transmission . . . . . . . . . . . . . . . 8
- 3.1.1. Packed Configuration . . . . . . . . . . . . . . . . . 9
- 3.2. Packed Headers Delivery . . . . . . . . . . . . . . . . . 10
- 3.2.1. Packed Headers IANA Considerations . . . . . . . . . . 11
- 3.3. Loss of Configuration Headers . . . . . . . . . . . . . . 12
- 4. Comment Headers . . . . . . . . . . . . . . . . . . . . . . . 12
- 5. Frame Packetizing . . . . . . . . . . . . . . . . . . . . . . 13
- 5.1. Example Fragmented Vorbis Packet . . . . . . . . . . . . . 13
- 5.2. Packet Loss . . . . . . . . . . . . . . . . . . . . . . . 16
- 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17
- 6.1. Mapping MIME Parameters into SDP . . . . . . . . . . . . . 18
- 7. Congestion Control . . . . . . . . . . . . . . . . . . . . . . 19
- 8. Security Considerations . . . . . . . . . . . . . . . . . . . 19
- 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 19
- 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20
- 10.1. Normative References . . . . . . . . . . . . . . . . . . . 20
- 10.2. Informative References . . . . . . . . . . . . . . . . . . 21
- Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 22
- Intellectual Property and Copyright Statements . . . . . . . . . . 23
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 2]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-1. Introduction
-
- Vorbis is a general purpose perceptual audio codec intended to allow
- maximum encoder flexibility, thus allowing it to scale competitively
- over an exceptionally wide range of bitrates. At the high quality/
- bitrate end of the scale (CD or DAT rate stereo, 16/24 bits), it is
- in the same league as MPEG-2 and MPC. Similarly, the version 1.1
- reference encoder can encode high-quality CD and DAT rate stereo at
- below 48k bits/sec without resampling to a lower rate. Vorbis is
- also intended for lower and higher sample rates (from 8kHz telephony
- to 192kHz digital masters) and a range of channel representations
- (monaural, polyphonic, stereo, quadraphonic, 5.1, ambisonic, or up to
- 255 discrete channels).
-
- Vorbis encoded audio is generally encapsulated within an Ogg format
- bitstream [1], which provides framing and synchronization. For the
- purposes of RTP transport, this layer is unnecessary, and so raw
- Vorbis packets are used in the payload.
-
-1.1. Terminology
-
- The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in RFC 2119 [2].
-
-
-2. Payload Format
-
- For RTP based transportation of Vorbis encoded audio the standard RTP
- header is followed by a 4 octet payload header, then the payload
- data. The payload headers are used to associate the Vorbis data with
- its associated decoding codebooks as well as indicating if the
- following packet contains fragmented Vorbis data and/or the the
- number of whole Vorbis data frames. The payload data contains the
- raw Vorbis bitstream information.
-
-2.1. RTP Header
-
- The format of the RTP header is specified in [3] and shown in Figure
- Figure 1. This payload format uses the fields of the header in a
- manner consistent with that specification.
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 3]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | sequence number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | timestamp |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 1: RTP Header
-
- The RTP header begins with an octet of fields (V, P, X, and CC) to
- support specialized RTP uses (see [3] and [4] for details). For
- Vorbis RTP, the following values are used.
-
- Version (V): 2 bits
-
- This field identifies the version of RTP. The version used by this
- specification is two (2).
-
- Padding (P): 1 bit
-
- Padding MAY be used with this payload format according to section 5.1
- of [3].
-
- Extension (X): 1 bit
-
- The Extension bit is used in accordance with [3].
-
- CSRC count (CC): 4 bits
-
- The CSRC count is used in accordance with [3].
-
- Marker (M): 1 bit
-
- Set to zero. Audio silence suppression not used. This conforms to
- section 4.1 of [12].
-
- Payload Type (PT): 7 bits
-
- An RTP profile for a class of applications is expected to assign a
- payload type for this format, or a dynamically allocated payload type
- SHOULD be chosen which designates the payload as Vorbis.
-
-
-
-
-Barbato Expires April 18, 2006 [Page 4]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Sequence number: 16 bits
-
- The sequence number increments by one for each RTP data packet sent,
- and may be used by the receiver to detect packet loss and to restore
- packet sequence. This field is detailed further in [3].
-
- Timestamp: 32 bits
-
- A timestamp representing the sampling time of the first sample of the
- first Vorbis packet in the RTP packet. The clock frequency MUST be
- set to the sample rate of the encoded audio data and is conveyed out-
- of-band as a SDP attribute.
-
- SSRC/CSRC identifiers:
-
- These two fields, 32 bits each with one SSRC field and a maximum of
- 16 CSRC fields, are as defined in [3].
-
-2.2. Payload Header
-
- After the RTP Header section the following 4 octets are the Payload
- Header. This header is split into a number of bitfields detailing
- the format of the following payload data packets.
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | F |VDT|# pkts.|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 2: Payload Header
-
- Ident: 24 bits
-
- This 24 bit field is used to associate the Vorbis data to a decoding
- Configuration.
-
- Fragment type (F): 2 bits
-
- This field is set accordingly the following list
-
- 0 = Not Fragmented
- 1 = Start Fragment
- 2 = Continuation Fragment
- 3 = End Fragment
-
- Vorbis Data Type (VDT): 2 bits
-
-
-
-
-Barbato Expires April 18, 2006 [Page 5]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- This field sets the packet payload type for the Vorbis data. There
- are currently three type of Vorbis payloads.
-
- 0 = Raw Vorbis payload
- 1 = Vorbis Packed Configuration payload
- 2 = Legacy Vorbis Comment payload
- 3 = Reserved
-
- The last 4 bits are the number of complete packets in this payload.
- This provides for a maximum number of 15 Vorbis packets in the
- payload. If the packet contains fragmented data the number of
- packets MUST be set to 0.
-
-2.3. Payload Data
-
- Raw Vorbis packets are unbounded in length currently, although at
- some future point there will likely be a practical limit placed on
- them. Typical Vorbis packet sizes are from very small (2-3 bytes) to
- quite large (8-12 kilobytes). The reference implementation [11]
- typically produces packets less than ~800 bytes, except for the setup
- header packets which are ~4-12 kilobytes. Within an RTP context the
- maximum packet size, including the RTP and payload headers, SHOULD be
- kept below the path MTU to avoid packet fragmentation.
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis packet data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 3: Payload Data Header
-
- Each Vorbis payload packet starts with a two octet length header,
- which is used to represent the size of the following data payload,
- followed by the raw Vorbis data.
-
- For payloads which consist of multiple Vorbis packets the payload
- data consists of the packet length followed by the packet data for
- each of the Vorbis packets in the payload.
-
- The Vorbis packet length header is the length of the Vorbis data
- block only and does not count the length field.
-
- The payload packing of the Vorbis data packets SHOULD follow the
- guidelines set-out in [4] where the oldest packet occurs immediately
- after the RTP packet header.
-
- Channel mapping of the audio is in accordance with BS. 775-1 ITU-R
-
-
-
-Barbato Expires April 18, 2006 [Page 6]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- [14].
-
-2.4. Example RTP Packet
-
- Here is an example RTP packet containing two Vorbis packets.
-
- RTP Packet Header:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | 2 |0|0| 0 |0| PT | sequence number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | timestamp (in sample rate units) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronisation source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 4: Example Packet (RTP Headers)
-
- Payload Data:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 0 | 2 pks |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | next vorbis packet data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 5: Example Packet (Payload Data)
-
- The payload data section of the RTP packet starts with the 24 bit
- Ident field followed by the one octet bitfield header, which has the
- number of Vorbis frames set to 2. Each of the Vorbis data frames is
- prefixed by the two octet length field. The Packet Type and Fragment
- Type are set to 0. The decode Configuration that will be used to
- decode the packets is the one indexed by the ident value.
-
-
-
-
-Barbato Expires April 18, 2006 [Page 7]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-3. Configuration Headers
-
- Unlike other mainstream audio codecs Vorbis has no statically
- configured probability model. Instead, it packs all entropy decoding
- configuration, VQ and Huffman models into a data block that must be
- transmitted to the decoder along with the compressed data. A decoder
- also requires identification information detailing the number of
- audio channels, bitrates and other information to configure itself
- for a particular compressed data stream. These two blocks of
- information are often referred to collectively as the "codebooks" for
- a Vorbis stream, and are nominally included as special "header"
- packets at the start of the compressed data.
-
- Thus these two codebook header packets must be received by the
- decoder before any audio data can be interpreted. In addition, the
- Vorbis I specification [12] requires the presense of a comment header
- packet which gives simple metadata about the stream. This
- requirement poses problems in RTP, which is often used over
- unreliable transports.
-
- Since this information must be transmitted reliably, and as the RTP
- stream may change certain configuration data mid-session there are
- different methods for delivering this configuration data to a client,
- both in-band and out-of-band which is detailed below. SDP delivery
- is used to setup an initial state for the client application. The
- changes may be due to different codebooks as well as different
- bitrates of the stream.
-
- The delivery vectors in use are specified by an SDP attribute to
- indicate the method and the optional URI where the Vorbis Packed
- Configuration (Section 3.1.1) Packets could be fetched. Different
- delivery methods MAY be advertised for the same session. The in-band
- Configuration delivery SHOULD be considered as baseline, out-of-band
- delivery methods that don't use RTP will not be described in this
- document. For non chained streams, the Configuration delivery method
- RECOMMENDED is inline the Packed Configuration (Section 3.1.1) in the
- SDP as explained in the IANA considerations (Section 6.1) section.
-
- The 24 bit Ident field is used to indicate when a change in the
- stream has taken place. The client application MUST have in advance
- the correct configuration and if the client detects a change in the
- Ident value and does not have this information it MUST NOT decode the
- raw Vorbis data.
-
-3.1. In-band Header Transmission
-
- The Packed Configuration (Section 3.1.1) Payload is sent in-band with
- the packet type bits set to match the payload type. Clients MUST be
-
-
-
-Barbato Expires April 18, 2006 [Page 8]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- capable of dealing with fragmentation and periodic re-transmission of
- the configuration headers.
-
-3.1.1. Packed Configuration
-
- A Vorbis Packed Configuration is indicated with the payload type
- field set to 1. Of the three headers, defined in the Vorbis I
- specification [12], the identification and the setup will be packed
- together, the comment header is completely suppressed. Is up to the
- client provide a minimal size comment header to the decoder if
- required by the implementation.
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | xxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 1 | 1|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Setup length | Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. | Setup ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 6: Packed Configuration Figure
-
- The Ident field is set with the value that will be used by the Raw
- Payload Packets to address this Configuration. The Fragment type is
- set to 0 since the packet bears the full Packed configuration, the
- number of packet is set to 1
-
-
-
-Barbato Expires April 18, 2006 [Page 9]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-3.2. Packed Headers Delivery
-
- As mentioned above the RECOMMENDED delivery vector for Vorbis
- configuration data is via a retrieval method that can be performed
- using a reliable transport protocol. As the RTP headers are not
- required for this method of delivery the structure of the
- configuration data is slightly different. The packed header starts
- with a 32 bit count field which details the number of packed headers
- that are contained in the bundle. Next is the Packed header payload
- for each chained Vorbis stream.
-
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Number of packed headers |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Packed header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Packed header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 7: Packed Headers Overview
-
- Since the Configuration Ident and the Identification Header are fixed
- length there is only a 2 byte Setup Length tag to define the length
- of the Setup header.
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Length | Identification Header ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification Header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Setup Header ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup Header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 8: Packed Headers Detail
-
- The key difference between the in-band format is there is no need for
- the payload header octet.
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 10]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-3.2.1. Packed Headers IANA Considerations
-
- The following IANA considerations MUST only be applied to the packed
- headers.
-
- MIME media type name: audio
-
- MIME subtype: vorbis-config
-
- Required Parameters:
-
- None.
-
- Optional Parameters:
-
- None.
-
- Encoding considerations:
-
- This type is only defined for transfer via non RTP protocols as
- specified in RFC XXXX.
-
- Security Considerations:
-
- See Section 6 of RFC 3047.
-
- Interoperability considerations: none
-
- Published specification:
-
- See RFC XXXX for details.
-
- Applications which use this media type:
-
- Vorbis encoded audio, configuration data.
-
- Additional information: none
-
- Person & email address to contact for further information:
-
- Luca Barbato: <lu_zero at gentoo.org>
-
- Intended usage: COMMON
-
- Author/Change controller:
-
- Author: Luca Barbato
-
-
-
-
-Barbato Expires April 18, 2006 [Page 11]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Change controller: IETF AVT Working Group
-
-3.3. Loss of Configuration Headers
-
- Unlike the loss of raw Vorbis payload data, loss of a configuration
- header can lead to a situation where it will not be possible to
- successfully decode the stream.
-
- Loss of Configuration Packet results in the halting of stream
- decoding and SHOULD be reported to the client as well as a loss
- report sent via RTCP.
-
-
-4. Comment Headers
-
- With the payload type flag set to 2, this indicates that the packet
- contain the comment metadata, such as artist name, track title and so
- on. These metadata messages are not intended to be fully descriptive
- but to offer basic track/song information. This packet SHOULD NOT be
- sent and clients MAY ignore it completely. The details on the format
- of the comments can be found in the Vorbis documentation [12].
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | xxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 2 | 1|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | Comment ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Comment ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Comment |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 9: Comment Packet
-
- The 2 bytes length field is necessary since this packet could be
- fragmented.
-
-
-
-Barbato Expires April 18, 2006 [Page 12]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-5. Frame Packetizing
-
- Each RTP packet contains either one Vorbis packet fragment, or an
- integer number of complete Vorbis packets (up to a max of 15 packets,
- since the number of packets is defined by a 4 bit value).
-
- Any Vorbis data packet that is less than path MTU SHOULD be bundled
- in the RTP packet with as many Vorbis packets as will fit, up to a
- maximum of 15. Path MTU is detailed in [6] and [7].
-
- If a Vorbis packet, not only data but also Configuration and Comment,
- is larger than 65535 octets it MUST be fragmented. A fragmented
- packet has a zero in the last four bits of the payload header. The
- first fragment will set the Fragment type to 1. Each fragment after
- the first will set the Fragment type to 2 in the payload header. The
- RTP packet containing the last fragment of the Vorbis packet will
- have the Fragment type set to 3. To maintain the correct sequence
- for fragmented packet reception the timestamp field of fragmented
- packets MUST be the same as the first packet sent, with the sequence
- number incremented as normal for the subsequent RTP packets.
-
-5.1. Example Fragmented Vorbis Packet
-
- Here is an example fragmented Vorbis packet split over three RTP
- packets. Each packet contains the standard RTP headers as well as
- the 4 octet Vorbis headers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 13]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Packet 1:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1000 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 1 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 10: Example Fragmented Packet (Packet 1)
-
- In this packet the initial sequence number is 1000 and the timestamp
- is xxxxx. The Fragment type is set to 1, the number of packets field
- is set to 0, and as the payload is raw Vorbis data the VDT field is
- set to 0.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 14]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Packet 2:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1001 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 2 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 11: Example Fragmented Packet (Packet 2)
-
- The Fragment type field is set to 2 and the number of packets field
- is set to 0. For large Vorbis fragments there can be several of
- these type of payload packets. The maximum packet size SHOULD be no
- greater than the path MTU, including all RTP and payload headers.
- The sequence number has been incremented by one but the timestamp
- field remains the same as the initial packet.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 15]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Packet 3:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1002 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 3 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Figure 12: Example Fragmented Packet (Packet 3)
-
- This is the last Vorbis fragment packet. The Fragment type is set to
- 3 and the packet count remains set to 0. As in the previous packets
- the timestamp remains set to the first packet in the sequence and the
- sequence number has been incremented.
-
-5.2. Packet Loss
-
- As there is no error correction within the Vorbis stream, packet loss
- will result in a loss of signal. Packet loss is more of an issue for
- fragmented Vorbis packets as the client will have to cope with the
- handling of the Fragment Type. In case of loss of fragments the
- client MUST discard all of them. If we use the fragmented Vorbis
- packet example above and the first packet is lost the client MUST
- detect that the next packet has the packet count field set to 0 and
- the Fragment type 2 and MUST drop it. The next packet, which is the
- final fragmented packet, MUST be dropped in the same manner.
- Feedback reports on lost and dropped packets MUST be sent back via
- RTCP.
-
- If a particular multicast session has a large number of participants
- care must be taken to prevent an RTCP feedback implosion, [10], in
- the event of packet loss from a large number of participants.
-
- Loss of any of the configuration headers, detailed below, is dealt
-
-
-
-Barbato Expires April 18, 2006 [Page 16]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- with in the Loss of Configuration Headers Section later.
-
-
-6. IANA Considerations
-
- MIME media type name: audio
-
- MIME subtype: vorbis
-
- Required Parameters:
-
- delivery-method: indicates the delivery methods in use, the possible
- values are:inline, in_band, out_band
-
- configuration: the base16 [9] (hexadecimal) representation of the
- Packed Headers (Section 3.2).
-
- Optional Parameters:
-
- configuration-uri: the URI of the configuration headers in case of
- out of band transmission. In the form of proto://path/to/resource/
- Depending on the specific method the single ident packet could be
- retrived by their number, or aggregated in a single stream.
-
- Encoding considerations:
-
- This type is only defined for transfer via RTP as specified in RFC
- XXXX.
-
- Security Considerations:
-
- See Section 6 of RFC 3047.
-
- Interoperability considerations: none
-
- Published specification:
-
- See the Vorbis documentation [12] for details.
-
- Applications which use this media type:
-
- Audio streaming and conferencing tools
-
- Additional information: none
-
- Person & email address to contact for further information:
-
- Luca Barbato: <lu_zero at gentoo.org>
-
-
-
-Barbato Expires April 18, 2006 [Page 17]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Intended usage: COMMON
-
- Author/Change controller:
-
- Author: Luca Barbato
-
- Change controller: IETF AVT Working Group
-
-6.1. Mapping MIME Parameters into SDP
-
- The information carried in the MIME media type specification has a
- specific mapping to fields in the Session Description Protocol (SDP)
- [5], which is commonly used to describe RTP sessions. When SDP is
- used to specify sessions the mapping are as follows:
-
- o The MIME type ("audio") goes in SDP "m=" as the media name.
-
- o The MIME subtype ("VORBIS") goes in SDP "a=rtpmap" as the encoding
- name.
-
- o The parameter "rate" also goes in "a=rtpmap" as clock rate.
-
- o The parameter "channels" also goes in "a=rtpmap" as channel count.
-
- o The mandated parameters "delivery-method" and "configuration" MUST
- be included in the SDP "a=fmpt" attribute.
-
- o The optional parameter "configuration-uri", when present, MUST be
- included in the SDP "a=fmpt" attribute.
-
- If the stream comprises chained Vorbis files and all of them are
- known in advance, the Configuration Packet for each file SHOULD be
- passed to the client using the configuration attribute.
-
- The Vorbis configuration specified in the configuration-uri attribute
- MUST point to a location where all of the Configuration Packets
- needed for the life of the session reside.
-
- The port value is specified by the server application bound to the
- address specified in the c attribute. The bitrate value and channels
- specified in the rtpmap attribute MUST match the Vorbis sample rate
- value. An example is found below.
-
- c=IN IP4/6
- m=audio RTP/AVP 98
- a=rtpmap:98 VORBIS/44100/2
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 18]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- a=delivery:out_band/http
- a=fmtp:98 delivery-method:inline,out_band/http;
- configuration=base16string1;
- configuration-uri=http://path/to/the/resource
-
- Note that the payload format (encoding) names are commonly shown in
- upper case. MIME subtypes are commonly shown in lower case. These
- names are case-insensitive in both places. Similarly, parameter
- names are case-insensitive both in MIME types and in the default
- mapping to the SDP a=fmtp attribute. The exception regarding case
- sensitivity is the configuration-uri URI which MUST be regarded as
- being case sensitive.
-
- The answer to any offer, [8], MUST NOT change the URI specified in
- the configuration-uri attribute.
-
-
-7. Congestion Control
-
- Vorbis clients SHOULD send regular receiver reports detailing
- congestion. A mechanism for dynamically downgrading the stream,
- known as bitrate peeling, will allow for a graceful backing off of
- the stream bitrate. This feature is not available at present so an
- alternative would be to redirect the client to a lower bitrate stream
- if one is available.
-
- If a particular multicast session has a large number of participants
- care must be taken to prevent an RTCP feedback implosion, [10], in
- the event of congestion.
-
-
-8. Security Considerations
-
- RTP packets using this payload format are subject to the security
- considerations discussed in the RTP specification [3]. This implies
- that the confidentiality of the media stream is achieved by using
- encryption. Because the data compression used with this payload
- format is applied end-to-end, encryption may be performed on the
- compressed data. Where the size of a data block is set care MUST be
- taken to prevent buffer overflows in the client applications.
-
-
-9. Acknowledgments
-
- This document is a continuation of draft-moffitt-vorbis-rtp-00.txt
- and draft-kerr-avt-vorbis-rtp-04.txt. The MIME type section is a
- continuation of draft-short-avt-rtp-vorbis-mime-00.txt.
-
-
-
-
-Barbato Expires April 18, 2006 [Page 19]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
- Thanks to the AVT, Ogg Vorbis Communities / Xiph.org including Steve
- Casner, Aaron Colwell, Ross Finlayson, Fluendo, Ramon Garcia, Pascal
- Hennequin, Ralph Giles, Tor-Einar Jarnbjo, Colin Law, John Lazzaro,
- Jack Moffitt, Christopher Montgomery, Colin Perkins, Barry Short,
- Mike Smith, Phil Kerr, Michael Sparks, Magnus Westerlund, David
- Barrett, Silvia Pfeiffer, Politecnico di Torino (LS)^3/IMG Group in
- particular Federico Ridolfo, Francesco Varano, Giampaolo Mancini,
- Juan Carlos De Martin.
-
-
-10. References
-
-10.1. Normative References
-
- [1] Pfeiffer, S., "The Ogg Encapsulation Format Version 0",
- RFC 3533.
-
- [2] Bradner, S., "Key words for use in RFCs to Indicate Requirement
- Levels", RFC 2119.
-
- [3] Schulzrinne, H., Casner, S., Frederick, R., and V. Jacobson,
- "RTP: A Transport Protocol for real-time applications",
- RFC 3550.
-
- [4] Schulzrinne, H. and S. Casner, "RTP Profile for Audio and Video
- Conferences with Minimal Control.", RFC 3551.
-
- [5] Handley, M. and V. Jacobson, "SDP: Session Description
- Protocol", RFC 2327.
-
- [6] Mogul et al., J., "Path MTU Discovery", RFC 1063.
-
- [7] McCann et al., J., "Path MTU Discovery for IP version 6",
- RFC 1981.
-
- [8] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with
- Session Description Protocol (SDP)", RFC 3264.
-
- [9] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings",
- RFC 3548.
-
- [10] Ott, J., Wenger, S., Sato, N., Burmeister, C., and J. Rey,
- "Extended RTP Profile for RTCP-based Feedback (RTP/AVPF)",
- Internet Draft (draft-ietf-avt-rtcp-feedback-11: Work in
- progress).
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 20]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-10.2. Informative References
-
- [11] "libvorbis: Available from the Xiph website,
- http://www.xiph.org".
-
- [12] "Ogg Vorbis I specification: Codec setup and packet decode.
- Available from the Xiph website, http://www.xiph.org".
-
- [13] "Ogg Vorbis I specification: Comment field and header
- specification. Available from the Xiph website,
- http://www.xiph.org".
-
- [14] "ITU (1992-1994) ITU-R Recommendation BS. 775-1 Multi-channel
- stereophonic sound system with or without accompanying
- picture. International Telecommunications Union. Available from
- the ITU website, http://www.itu.int".
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 21]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-Author's Address
-
- Luca Barbato
- Xiph.Org
-
- Email: lu_zero at gentoo.org
- URI: http://www.xiph.org/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Barbato Expires April 18, 2006 [Page 22]
-
-Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
-
-
-Intellectual Property Statement
-
- The IETF takes no position regarding the validity or scope of any
- Intellectual Property Rights or other rights that might be claimed to
- pertain to the implementation or use of the technology described in
- this document or the extent to which any license under such rights
- might or might not be available; nor does it represent that it has
- made any independent effort to identify any such rights. Information
- on the procedures with respect to rights in RFC documents can be
- found in BCP 78 and BCP 79.
-
- Copies of IPR disclosures made to the IETF Secretariat and any
- assurances of licenses to be made available, or the result of an
- attempt made to obtain a general license or permission for the use of
- such proprietary rights by implementers or users of this
- specification can be obtained from the IETF on-line IPR repository at
- http://www.ietf.org/ipr.
-
- The IETF invites any interested party to bring to its attention any
- copyrights, patents or patent applications, or other proprietary
- rights that may cover technology that may be required to implement
- this standard. Please address the information to the IETF at
- ietf-ipr at ietf.org.
-
-
-Disclaimer of Validity
-
- This document and the information contained herein are provided on an
- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-
-
-Copyright Statement
-
- Copyright (C) The Internet Society (2005). This document is subject
- to the rights, licenses and restrictions contained in BCP 78, and
- except as set forth therein, the authors retain all their rights.
-
-
-Acknowledgment
-
- Funding for the RFC Editor function is currently provided by the
- Internet Society.
-
-
-
-
-Barbato Expires April 18, 2006 [Page 23]
-
Deleted: trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml
===================================================================
--- trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml 2005-10-20 17:20:33 UTC (rev 10213)
+++ trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml 2005-10-20 17:21:37 UTC (rev 10214)
@@ -1,1013 +0,0 @@
-<?xml version='1.0'?>
-<!DOCTYPE rfc SYSTEM 'rfc2629.dtd'>
-<?rfc toc="yes" ?>
-<?rfc compact='yes'?>
-
-<rfc ipr="full3667" docName="RTP Payload Format for Vorbis Encoded Audio">
-
-<front>
-<title>draft-ietf-avt-vorbis-rtp-01</title>
-
-<author initials="L" surname="Barbato" fullname="Luca Barbato">
-<organization>Xiph.Org</organization>
-<address>
-<email>lu_zero at gentoo.org</email>
-<uri>http://www.xiph.org/</uri>
-</address>
-</author>
-
-<date day="15" month="October" year="2005" />
-
-<area>General</area>
-<workgroup>AVT Working Group</workgroup>
-<keyword>I-D</keyword>
-
-<keyword>Internet-Draft</keyword>
-<keyword>Vorbis</keyword>
-<keyword>RTP</keyword>
-
-<abstract>
-<t>
-This document describes an RTP payload format for transporting Vorbis encoded audio. It details the RTP encapsulation mechanism for raw Vorbis data and details the delivery mechanisms for the decoder probability model, referred to as a codebook and other setup information.
-</t>
-
-<t>
-Also included within the document are the necessary details for the use of Vorbis with MIME and Session Description Protocol (SDP).
-</t>
-
-</abstract>
-
-<note title="Editors Note">
-<t>
-All references to RFC XXXX are to be replaced by references to the RFC number of this memo, when published.
-</t>
-</note>
-
-</front>
-
-<middle>
-
-<section anchor="Introduction" title="Introduction">
-
-<t>
-Vorbis is a general purpose perceptual audio codec intended to allow
-maximum encoder flexibility, thus allowing it to scale competitively
-over an exceptionally wide range of bitrates. At the high
-quality/bitrate end of the scale (CD or DAT rate stereo, 16/24 bits), it
-is in the same league as MPEG-2 and MPC.
-Similarly, the version 1.1 reference encoder can encode high-quality CD
-and DAT rate stereo at below 48k bits/sec without resampling to a lower
-rate. Vorbis is also intended for lower and higher sample rates (from
-8kHz telephony to 192kHz digital masters) and a range of channel
-representations (monaural, polyphonic, stereo, quadraphonic, 5.1,
-ambisonic, or up to 255 discrete channels).
-</t>
-
-<t>
-Vorbis encoded audio is generally encapsulated within an Ogg format bitstream <xref target="rfc3533"></xref>, which provides
-framing and synchronization. For the purposes of RTP transport, this layer is unnecessary, and so raw Vorbis packets are used
-in the payload.
-</t>
-
-<section anchor="Terminology" title="Terminology">
-
-<t>
-The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL"
-in this document are to be interpreted as described in RFC 2119 <xref target="rfc2119"></xref>.
-</t>
-
-</section>
-</section>
-
-<section anchor="Payload Format" title="Payload Format">
-
-<t>
-For RTP based transportation of Vorbis encoded audio the standard RTP header is followed by a 4 octet payload header, then the payload data. The payload headers are used to associate the Vorbis data with its associated decoding codebooks as well as indicating if the following packet contains fragmented Vorbis data and/or the the number of whole Vorbis data frames. The payload data contains the raw Vorbis bitstream information.
-</t>
-
-<section anchor="RTP Header" title="RTP Header">
-
-<t>
-The format of the RTP header is specified in <xref target="rfc3550"></xref> and shown in Figure <xref target="RTP Header Figure"/>. This payload format uses the fields of the header in a manner consistent with that specification.
-</t>
-
-<t>
-<figure anchor="RTP Header Figure" title="RTP Header">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | sequence number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | timestamp |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-</t>
-
-<t>
-The RTP header begins with an octet of fields (V, P, X, and CC) to support specialized RTP uses (see <xref target="rfc3550">
-</xref> and <xref target="rfc3551"></xref> for details). For Vorbis RTP, the following values are used.
-</t>
-
-<t>
-Version (V): 2 bits</t>
-<t>
-This field identifies the version of RTP. The version used by this specification is two (2).
-</t>
-
-<t>
-Padding (P): 1 bit</t>
-<t>
-Padding MAY be used with this payload format according to section 5.1 of <xref target="rfc3550"></xref>.
-</t>
-
-<t>
-Extension (X): 1 bit</t>
-<t>
-The Extension bit is used in accordance with <xref target="rfc3550"></xref>.
-</t>
-
-<t>
-CSRC count (CC): 4 bits</t>
-<t>
-The CSRC count is used in accordance with <xref target="rfc3550"></xref>.
-</t>
-
-<t>
-Marker (M): 1 bit</t>
-<t>
-Set to zero. Audio silence suppression not used. This conforms to section 4.1 of <xref target="vorbis-spec-ref"></xref>.
-</t>
-
-<t>
-Payload Type (PT): 7 bits</t>
-<t>
-An RTP profile for a class of applications is expected to assign a payload type for this format, or a dynamically allocated
-payload type SHOULD be chosen which designates the payload as Vorbis.
-</t>
-
-<t>
-Sequence number: 16 bits</t>
-<t>
-The sequence number increments by one for each RTP data packet sent, and may be used by the receiver to detect packet loss and
-to restore packet sequence. This field is detailed further in <xref target="rfc3550"></xref>.
-</t>
-
-<t>
-Timestamp: 32 bits</t>
-<t>
-A timestamp representing the sampling time of the first sample of the first Vorbis packet in the RTP packet. The clock frequency
-MUST be set to the sample rate of the encoded audio data and is conveyed out-of-band as a SDP attribute.
-</t>
-
-<t>
-SSRC/CSRC identifiers: </t>
-<t>
-These two fields, 32 bits each with one SSRC field and a maximum of 16 CSRC fields, are as defined in <xref target="rfc3550">
-</xref>.
-</t>
-
-</section>
-
-<section anchor="Payload Header" title="Payload Header">
-
-<t>
-After the RTP Header section the following 4 octets are the Payload Header. This header is split into a number of bitfields detailing the format of the following payload data packets.
-</t>
-
-<figure anchor="Payload Header Figure" title="Payload Header">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | F |VDT|# pkts.|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-Ident: 24 bits</t>
-<t>
-This 24 bit field is used to associate the Vorbis data to a decoding Configuration.
-</t>
-
-<t>
-Fragment type (F): 2 bits</t>
-<t>
-This field is set accordingly the following list
-</t>
-<vspace blankLines="1" />
-<list style="empty">
-<t> 0 = Not Fragmented</t>
-<t> 1 = Start Fragment</t>
-<t> 2 = Continuation Fragment</t>
-<t> 3 = End Fragment</t>
-</list>
-
-<t>
-Vorbis Data Type (VDT): 2 bits</t>
-<t>
-This field sets the packet payload type for the Vorbis data. There are currently three type of Vorbis payloads.
-</t>
-
-<vspace blankLines="1" />
-<list style="empty">
-<t> 0 = Raw Vorbis payload</t>
-<t> 1 = Vorbis Packed Configuration payload</t>
-<t> 2 = Legacy Vorbis Comment payload</t>
-<t> 3 = Reserved</t>
-</list>
-
-<t>
-The last 4 bits are the number of complete packets in this payload. This provides for a maximum number of 15 Vorbis packets in the payload. If the packet contains fragmented data the number of packets MUST be set to 0.
-</t>
-
-</section>
-
-<section anchor="Payload Data" title="Payload Data">
-
-<t>
-Raw Vorbis packets are unbounded in length currently, although at some future point there will likely be a practical limit placed on them. Typical Vorbis packet sizes are from very small (2-3 bytes) to quite large (8-12 kilobytes). The reference implementation <xref target="libvorbis"></xref> typically produces packets less than ~800 bytes, except for the setup header packets which are ~4-12 kilobytes. Within an RTP context the maximum packet size, including the RTP and payload headers, SHOULD be kept below the path MTU to avoid packet fragmentation.
-</t>
-
-<figure anchor="Payload Data Figure" title="Payload Data Header">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis packet data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-Each Vorbis payload packet starts with a two octet length header, which is used to represent the size of the following data payload, followed by the raw Vorbis data padded to the nearest byte boundary.
-</t>
-
-<t>
-For payloads which consist of multiple Vorbis packets the payload data consists of the packet length followed by the packet data for each of the Vorbis packets in the payload.
-</t>
-
-<t>
-The Vorbis packet length header is the length of the Vorbis data block only and does not count the length field.
-</t>
-
-<t>
-The payload packing of the Vorbis data packets MUST follow the guidelines set-out in <xref target="rfc3551"></xref> where the oldest packet occurs immediately after the RTP packet header.
-</t>
-
-<t>
-Channel mapping of the audio is in accordance with BS. 775-1 ITU-R <xref target="775itu"></xref>.
-</t>
-
-</section>
-
-<section anchor="Example RTP Packet" title="Example RTP Packet">
-
-<t>
-Here is an example RTP packet containing two Vorbis packets.
-</t>
-
-<t>
-RTP Packet Header:
-</t>
-
-<figure anchor="Example Header Packet (RTP Headers)" title="Example Packet (RTP Headers)">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | 2 |0|0| 0 |0| PT | sequence number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | timestamp (in sample rate units) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronisation source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-Payload Data:
-</t>
-
-<figure anchor="Example Packet (Payload Data)" title="Example Packet (Payload Data)">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 0 | 2 pks |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | next vorbis packet data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-The payload data section of the RTP packet starts with the 24 bit Ident field followed by the one octet bitfield header, which has the number of Vorbis frames set to 2. Each of the Vorbis data frames is prefixed by the two octet length field. The Packet Type and Fragment Type are set to 0. The decode Configuration that will be used to decode the packets is the one indexed by the ident value.
-</t>
-
-</section>
-</section>
-
-
-
-<section anchor="Configuration Headers" title="Configuration Headers">
-
-<t>
-Unlike other mainstream audio codecs Vorbis has no statically
-configured probability model. Instead, it packs all entropy decoding
-configuration, VQ and Huffman models into a data block that must be
-transmitted to the decoder along with the compressed data. A decoder
-also requires identification information detailing the number of audio
-channels, bitrates and other information to configure itself for a
-particular compressed data stream. These two blocks of information are
-often referred to collectively as the "codebooks" for a Vorbis stream,
-and are nominally included as special "header" packets at the start
-of the compressed data.
-</t>
-
-<t>
-Thus these two codebook header packets must be received by the decoder
-before any audio data can be interpreted. In addition,
-the <xref target="vorbis-spec-ref">Vorbis I specification</xref>
-requires the presense of a comment header packet which gives simple
-metadata about the stream. This requirement poses problems in RTP,
-which is often used over unreliable transports.
-</t>
-
-<t>
-Since this information must be transmitted reliably, and as the RTP
-stream may change certain configuration data mid-session there are
-different methods for delivering this configuration data to a
-client, both in-band and out-of-band which is detailed below. SDP
-delivery is used to setup an initial state for the client application.
-The changes may be due to different codebooks as well as different
-bitrates of the stream.
-</t>
-
-<t>
-The delivery vectors in use are specified by an SDP attribute to indicate the method and the optional URI where the Vorbis <xref target="Packed Configuration">Packed Configuration</xref> Packets could be fetched. Different delivery methods MAY be advertised for the same session. The in-band Configuration delivery SHOULD be considered as baseline, out-of-band delivery methods that don't use RTP will not be described in this document. For non chained streams, the Configuration delivery method RECOMMENDED is inline the <xref target="Packed Configuration">Packed Configuration</xref> in the SDP as explained in the <xref target="Mapping MIME Parameters into SDP"> IANA considerations</xref> section.
-</t>
-
-<t>
-The 24 bit Ident field is used to indicate when a change in the stream has taken place. The client application MUST have in advance the correct configuration and if the client detects a change in the Ident value and does not have this information it MUST NOT decode the raw Vorbis data.
-</t>
-
-<section anchor="In-band Header Transmission" title="In-band Header Transmission">
-
-<t>
-The <xref target="Packed Configuration">Packed Configuration</xref> Payload is sent in-band with the packet type bits set to match the payload type. Clients MUST be capable of dealing with fragmentation and periodic re-transmission of the configuration headers.
-</t>
-
-<section anchor="Packed Configuration" title="Packed Configuration">
-
-<t>
-A Vorbis Packed Configuration is indicated with the payload type field set to 1. Of the three headers, defined in the <xref target="vorbis-spec-ref">Vorbis I specification</xref>, the identification and the setup will be packed together, the comment header is completely suppressed. Is up to the client provide a minimal size comment header to the decoder if required by the implementation.
-</t>
-
-<figure anchor="Packed Configuration Figure" title="Packed Configuration Figure">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | xxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 1 | 1|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Setup length | Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. | Setup ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>The Ident field is set with the value that will be used by the Raw Payload Packets to address this Configuration. The Fragment type is set to 0 since the packet bears the full Packed configuration, the number of packet is set to 1</t>
-</section>
-
-
-</section>
-
-<section anchor="Packed Headers Delivery" title="Packed Headers Delivery">
-
-<t>
-As mentioned above the RECOMMENDED delivery vector for Vorbis configuration data is via a retrieval method that can be performed using a reliable transport protocol. As the RTP headers are not required for this method of delivery the structure of the configuration data is slightly different. The packed header starts with a 32 bit count field which details the number of packed headers that are contained in the bundle. Next is the Packed header payload for each chained Vorbis stream.
-</t>
-
-<figure anchor="Packed Headers Overview Figure" title="Packed Headers Overview">
-<artwork><![CDATA[
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Number of packed headers |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Packed header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Packed header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-Since the Configuration Ident and the Identification Header are fixed length there is only a 2 byte Setup Length tag to define the length of the Setup header.
-</t>
-
-<figure anchor="Packed Headers Detail Figure" title="Packed Headers Detail">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Length | Identification Header ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Identification Header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Setup Header ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Setup Header |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-<t>
-The key difference between the in-band format is there is no need for the payload header octet.
-</t>
-
-<section anchor="Packed Headers IANA Considerations" title="Packed Headers IANA Considerations">
-
-<t>
-The following IANA considerations MUST only be applied to the packed headers.
-</t>
-
-<t>
-MIME media type name: audio
-</t>
-<t>
-MIME subtype: vorbis-config
-</t>
-
-<t>
-Required Parameters:</t><t>
-None.
-</t>
-
-<t>
-Optional Parameters: </t><t>
-None.
-</t>
-
-<t>
-Encoding considerations:</t><t>
-This type is only defined for transfer via non RTP protocols as specified in RFC XXXX.
-</t>
-
-<t>
-Security Considerations:</t><t>
-See Section 6 of RFC 3047.
-</t>
-
-<t>
-Interoperability considerations: none
-</t>
-
-<t>
-Published specification:</t>
-<t>See RFC XXXX for details.</t>
-
-<t>
-Applications which use this media type:</t><t>
-Vorbis encoded audio, configuration data.
-</t>
-
-<t>
-Additional information: none
-</t>
-
-<t>
-Person & email address to contact for further information:</t><t>
-Luca Barbato: <lu_zero at gentoo.org>
-</t>
-
-<t>
-Intended usage: COMMON
-</t>
-
-<t>Author/Change controller:</t>
-<t>Author: Luca Barbato</t>
-<t>Change controller: IETF AVT Working Group</t>
-
-
-</section>
-</section>
-
-
-<section anchor="Loss of Configuration Headers" title="Loss of Configuration Headers">
-
-<t>
-Unlike the loss of raw Vorbis payload data, loss of a configuration header can lead to a situation where it will not be possible to successfully decode the stream.
-</t>
-
-<t>
-Loss of Configuration Packet results in the halting of stream decoding and SHOULD be reported to the client as well as a loss report sent via RTCP.
-</t>
-
-</section>
-
-<!-- <section anchor="Mapping between Configuration and Stream" title="Mapping between Configuration and Stream">
-
-<t>
-The mapping between the stream and the the configuration is explicit.
-</t>
-
-</section> -->
-
-
-</section>
-
-<section anchor="Comment Headers" title="Comment Headers">
-
-<t>
-With the payload type flag set to 2, this indicates that the packet contain the comment metadata, such as artist name, track title and so on. These metadata messages are not intended to be fully descriptive but to offer basic track/song information. Clients MAY ignore it completely. The details on the format of the comments can be found in the <xref target="vorbis-spec-ref">Vorbis documentation</xref>.
-</t>
-<figure anchor="Comment Packet Figure" title="Comment Packet">
-<artwork><![CDATA[
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | xxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 0 | 2 | 1|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | Comment ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Comment ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. Comment |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>The 2 bytes length field is necessary since this packet could be fragmented.</t>
-
-</section>
-<section anchor="Frame Packetizing" title="Frame Packetizing">
-
-<t>
-Each RTP packet contains either one Vorbis packet fragment, or an integer number of complete Vorbis packets (up to a max of 15 packets, since the number of packets is defined by a 4 bit value).
-</t>
-
-<t>
-Any Vorbis data packet that is less than path MTU SHOULD be bundled in the RTP packet with as many Vorbis packets as will fit, up to a maximum of 15. Path MTU is detailed in <xref target="rfc1063"></xref> and <xref target="rfc1981"></xref>.
-</t>
-
-<t>
-If a Vorbis packet, not only data but also Configuration and Comment, is larger than 65535 octets it MUST be fragmented. A fragmented packet has a zero in the last four bits of the payload header. The first fragment will set the Fragment type to 1. Each fragment after the first will set the Fragment type to 2 in the payload header. The RTP packet containing the last fragment of the Vorbis packet will have the Fragment type set to 3. To maintain the correct sequence for fragmented packet reception the timestamp field of fragmented packets MUST be the same as the first packet sent, with the sequence number incremented as normal for the subsequent RTP packets.
-</t>
-
-<section anchor="Example Fragmented Vorbis Packet" title="Example Fragmented Vorbis Packet">
-
-<t>
-Here is an example fragmented Vorbis packet split over three RTP packets. Each packet contains the standard RTP headers as well as the 4 octet Vorbis headers.
-</t>
-
-<figure anchor="Example Fragmented Packet (Packet 1)" title="Example Fragmented Packet (Packet 1)">
-<artwork><![CDATA[
- Packet 1:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1000 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 1 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-In this packet the initial sequence number is 1000 and the timestamp is xxxxx. The Fragment type is set to 1, the number of packets field is set to 0, and as the payload is raw Vorbis data the VDT field is set to 0.
-</t>
-
-<figure anchor="Example Fragmented Packet (Packet 2)" title="Example Fragmented Packet (Packet 2)">
-<artwork><![CDATA[
- Packet 2:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1001 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 2 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-The Fragment type field is set to 2 and the number of packets field is set to 0. For large Vorbis fragments there can be several of these type of payload packets. The maximum packet size SHOULD be no greater than the path MTU, including all RTP and payload headers. The sequence number has been incremented by one but the timestamp field remains the same as the initial packet.
-</t>
-
-<figure anchor="Example Fragmented Packet (Packet 3)" title="Example Fragmented Packet (Packet 3)">
-<artwork><![CDATA[
- Packet 3:
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |V=2|P|X| CC |M| PT | 1002 |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | xxxxx |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | synchronization source (SSRC) identifier |
- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
- | contributing source (CSRC) identifiers |
- | ... |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Ident | 3 | 0 | 0|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | length | vorbis data ..
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- .. vorbis data |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-]]></artwork>
-</figure>
-
-<t>
-This is the last Vorbis fragment packet. The Fragment type is set to 3 and the packet count remains set to 0. As in the previous packets the timestamp remains set to the first packet in the sequence and the sequence number has been incremented.
-</t>
-</section>
-
-<section anchor="Packet Loss" title="Packet Loss">
-
-<t>
-As there is no error correction within the Vorbis stream, packet loss will result in a loss of signal. Packet loss is more of an issue for fragmented Vorbis packets as the client will have to cope with the handling of the Fragment Type. In case of loss of fragments the client MUST discard all the remaining fragments and decode the incomplete packet. If we use the fragmented Vorbis packet example above and the first packet is lost the client MUST detect that the next packet has the packet count field set to 0 and the Fragment type 2 and MUST drop it. The next packet, which is the final fragmented packet, MUST be dropped in the same manner. If the missing packet is the last, the received two fragments will be kept and the incomplete vorbis packet decoded. Feedback reports on lost and dropped packets MUST be sent back via RTCP.
-</t>
-
-<t>
-If a particular multicast session has a large number of participants care must be taken to prevent an RTCP feedback implosion, <xref target="rtcp-feedback"></xref>, in the event of packet loss from a large number of participants.
-</t>
-
-<t>
-Loss of any of the configuration headers, detailed below, is dealt with in the Loss of Configuration Headers Section later.
-</t>
-
-</section>
-</section>
-<section anchor="IANA Considerations" title="IANA Considerations">
-
-<t>
-MIME media type name: audio
-</t>
-<t>
-MIME subtype: vorbis
-</t>
-
-<t>
-Required Parameters:
-</t>
-
-<t>
-delivery-method: indicates the delivery methods in use, the possible values are:inline, in_band, out_band
-</t><t>
-configuration: the <xref target="rfc3548">base16</xref> (hexadecimal) representation of the <xref target="Packed Headers Delivery">Packed Headers</xref>.
-</t>
-
-<t>
-Optional Parameters: </t><t>
-configuration-uri: the URI of the configuration headers in case of out of band transmission. In the form of proto://path/to/resource/ Depending on the specific method the single ident packet could be retrived by their number, or aggregated in a single stream.
-</t>
-
-<t>
-Encoding considerations:</t><t>
-This type is only defined for transfer via RTP as specified
-in RFC XXXX.
-</t>
-
-<t>
-Security Considerations:</t><t>
-See Section 6 of RFC 3047.
-</t>
-
-<t>
-Interoperability considerations: none
-</t>
-
-<t>
-Published specification:</t>
-<t>See the Vorbis documentation <xref target="vorbis-spec-ref"></xref> for details.</t>
-
-<t>
-Applications which use this media type:</t><t>
-Audio streaming and conferencing tools
-</t>
-
-<t>
-Additional information: none
-</t>
-
-<t>
-Person & email address to contact for further information:</t><t>
-Luca Barbato: <lu_zero at gentoo.org>
-</t>
-
-<t>
-Intended usage: COMMON
-</t>
-
-<t>Author/Change controller:</t>
-<t>Author: Luca Barbato</t>
-<t>Change controller: IETF AVT Working Group</t>
-
-<section anchor="Mapping MIME Parameters into SDP" title="Mapping MIME Parameters into SDP">
-
-<t>
-The information carried in the MIME media type specification has a specific mapping to fields in the Session Description Protocol (SDP) <xref target="rfc2327"></xref>, which is commonly used to describe RTP sessions. When SDP is used to specify sessions the mapping are as follows:
-</t>
-
-<vspace blankLines="1" />
-<list style="symbols">
-
-<t>The MIME type ("audio") goes in SDP "m=" as the media name.</t>
-<vspace blankLines="1" />
-
-<t>The MIME subtype ("vorbis") goes in SDP "a=rtpmap" as the encoding name.</t>
-<vspace blankLines="1" />
-
-<t>The parameter "rate" also goes in "a=rtpmap" as clock rate.</t>
-<vspace blankLines="1" />
-
-<t>The parameter "channels" also goes in "a=rtpmap" as channel count.</t>
-<vspace blankLines="1" />
-
-<t>The mandated parameters "delivery-method" and "configuration" MUST be included in the SDP "a=fmpt" attribute.</t>
-<vspace blankLines="1" />
-
-<t>The optional parameter "configuration-uri", when present, MUST be included in the SDP "a=fmpt" attribute.</t>
-
-</list>
-
-<t>
-If the stream comprises chained Vorbis files and all of them are known in advance, the Configuration Packet for each file SHOULD be passed to the client using the configuration attribute.
-</t>
-
-<t>
-The Vorbis configuration specified in the configuration-uri attribute MUST point to a location where all of the Configuration Packets needed for the life of the session reside.
-</t>
-
-<t>
-The port value is specified by the server application bound to the address specified in the c attribute. The bitrate value and channels specified in the rtpmap attribute MUST match the Vorbis sample rate value. An example is found below.
-</t>
-
-<vspace blankLines="1" />
-<list style="empty">
-<t>c=IN IP4/6 </t>
-<t>m=audio RTP/AVP 98</t>
-<t>a=rtpmap:98 VORBIS/44100/2</t>
-<t>a=delivery:out_band/http</t>
-<t>a=fmtp:98 delivery-method:inline,out_band/http; configuration=base16string1; configuration-uri=http://path/to/the/resource</t>
-</list>
-
-<t>
-Note that the payload format (encoding) names are commonly shown in upper case. MIME subtypes are commonly shown in lower case. These names are case-insensitive in both places. Similarly, parameter names are case-insensitive both in MIME types and in the default mapping to the SDP a=fmtp attribute. The exception regarding case sensitivity is the configuration-uri URI which MUST be regarded as being case sensitive.
-</t>
-
-<t>
-The answer to any offer, <xref target="rfc3264"></xref>, MUST NOT change the URI specified in the configuration-uri attribute.
-</t>
-
-</section>
-</section>
-
-
-<section anchor="Congestion Control" title="Congestion Control">
-
-<t>
-Vorbis clients SHOULD send regular receiver reports detailing congestion. A mechanism for dynamically downgrading the stream,
-known as bitrate peeling, will allow for a graceful backing off of the stream bitrate. This feature is not available at present
-so an alternative would be to redirect the client to a lower bitrate stream if one is available.
-</t>
-
-<t>
-If a particular multicast session has a large number of participants care must be taken to prevent an RTCP feedback implosion,
-<xref target="rtcp-feedback"></xref>, in the event of congestion.
-</t>
-
-</section>
-
-<section anchor="Security Considerations" title="Security Considerations">
-<t>
-RTP packets using this payload format are subject to the security considerations discussed in the RTP specification
-<xref target="rfc3550"></xref>. This implies that the confidentiality of the media stream is achieved by using
-encryption. Because the data compression used with this payload format is applied end-to-end, encryption may be performed on the
-compressed data. Where the size of a data block is set care MUST be taken to prevent buffer overflows in the client applications.
-</t>
-
-</section>
-
-<section anchor="Acknowledgments" title="Acknowledgments">
-
-<t>
-This document is a continuation of draft-moffitt-vorbis-rtp-00.txt and draft-kerr-avt-vorbis-rtp-04.txt. The MIME type section is a continuation of draft-short-avt-rtp-vorbis-mime-00.txt.
-</t>
-
-<t>
-Thanks to the AVT, Ogg Vorbis Communities / Xiph.org including Steve Casner, Aaron Colwell, Ross Finlayson, Fluendo, Ramon Garcia, Pascal Hennequin, Ralph Giles, Tor-Einar Jarnbjo, Colin Law, John Lazzaro, Jack Moffitt, Christopher Montgomery, Colin Perkins, Barry Short, Mike Smith, Phil Kerr, Michael Sparks, Magnus Westerlund, David Barrett, Silvia Pfeiffer, Politecnico di Torino (LS)³/IMG Group in particular Federico Ridolfo, Francesco Varano, Giampaolo Mancini, Juan Carlos De Martin.
-</t>
-
-</section>
-
-</middle>
-
-<back>
-
-<references title="Normative References">
-
-<reference anchor="rfc3533">
-<front>
-<title>The Ogg Encapsulation Format Version 0</title>
-<author initials="S." surname="Pfeiffer" fullname="Silvia Pfeiffer"></author>
-</front>
-<seriesInfo name="RFC" value="3533" />
-</reference>
-
-<reference anchor="rfc2119">
-<front>
-<title>Key words for use in RFCs to Indicate Requirement Levels </title>
-<author initials="S." surname="Bradner" fullname="Scott Bradner"></author>
-</front>
-<seriesInfo name="RFC" value="2119" />
-</reference>
-
-<reference anchor="rfc3550">
-<front>
-<title>RTP: A Transport Protocol for real-time applications</title>
-<author initials="H." surname="Schulzrinne" fullname=""></author>
-<author initials="S." surname="Casner" fullname=""></author>
-<author initials="R." surname="Frederick" fullname=""></author>
-<author initials="V." surname="Jacobson" fullname=""></author>
-</front>
-<seriesInfo name="RFC" value="3550" />
-</reference>
-
-<reference anchor="rfc3551">
-<front>
-<title>RTP Profile for Audio and Video Conferences with Minimal Control.</title>
-<author initials="H." surname="Schulzrinne" fullname=""></author>
-<author initials="S." surname="Casner" fullname=""></author>
-</front>
-<date month="July" year="2003" />
-<seriesInfo name="RFC" value="3551" />
-</reference>
-
-<reference anchor="rfc2327">
-<front>
-<title>SDP: Session Description Protocol</title>
-<author initials="M." surname="Handley" fullname="Mark Handley"></author>
-<author initials="V." surname="Jacobson" fullname="Van Jacobson"></author>
-</front>
-<seriesInfo name="RFC" value="2327" />
-</reference>
-
-<reference anchor="rfc1063">
-<front>
-<title>Path MTU Discovery</title>
-<author initials="J." surname="Mogul et al." fullname="J. Mogul et al."></author>
-</front>
-<seriesInfo name="RFC" value="1063" />
-</reference>
-
-<reference anchor="rfc1981">
-<front>
-<title>Path MTU Discovery for IP version 6</title>
-<author initials="J." surname="McCann et al." fullname="J. McCann et al."></author>
-</front>
-<seriesInfo name="RFC" value="1981" />
-</reference>
-
-<reference anchor="rfc3264">
-<front>
-<title>An Offer/Answer Model with Session Description Protocol (SDP)</title>
-<author initials="J." surname="Rosenberg" fullname="Jonathan Rosenberg"></author>
-<author initials="H." surname="Schulzrinne" fullname="Henning Schulzrinne"></author>
-</front>
-<seriesInfo name="RFC" value="3264" />
-</reference>
-
-<reference anchor="rfc3548">
-<front>
-<title>The Base16, Base32, and Base64 Data Encodings</title>
-<author initials="S." surname="Josefsson" fullname="Simon Josefsson"></author>
-</front>
-<seriesInfo name="RFC" value="3548" />
-</reference>
-
-<reference anchor="rtcp-feedback">
-<front>
-<title>Extended RTP Profile for RTCP-based Feedback (RTP/AVPF)</title>
-<author initials="J." surname="Ott" fullname="Joerg Ott"></author>
-<author initials="S." surname="Wenger" fullname="Stephan Wenger"></author>
-<author initials="N." surname="Sato" fullname="Noriyuki Sato"></author>
-<author initials="C." surname="Burmeister" fullname="Carsten Burmeister"></author>
-<author initials="J." surname="Rey" fullname="Jose Rey"></author>
-</front>
-<seriesInfo name="Internet Draft" value="(draft-ietf-avt-rtcp-feedback-11: Work in progress)" />
-</reference>
-
-
-</references>
-
-<references title="Informative References">
-<reference anchor="libvorbis">
-<front>
-<title>libvorbis: Available from the Xiph website, http://www.xiph.org</title>
-</front>
-</reference>
-
-<reference anchor="vorbis-spec-ref">
-<front>
-<title>Ogg Vorbis I specification: Codec setup and packet decode. Available from the Xiph website, http://www.xiph.org</title>
-</front>
-</reference>
-
-<reference anchor="v-comment">
-<front>
-<title>Ogg Vorbis I specification: Comment field and header specification. Available from the Xiph website,
-http://www.xiph.org</title>
-</front>
-</reference>
-
-<reference anchor="775itu">
-<front>
-<title>ITU (1992-1994) ITU-R Recommendation BS. 775-1 Multi-channel stereophonic sound system with or without accompanying
-picture. International Telecommunications Union. Available from the ITU website, http://www.itu.int
-</title>
-</front>
-</reference>
-
-</references>
-</back>
-</rfc>
Copied: trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.txt (from rev 10212, trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt)
===================================================================
--- trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.txt 2005-10-20 15:47:42 UTC (rev 10212)
+++ trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.txt 2005-10-20 17:21:37 UTC (rev 10214)
@@ -0,0 +1,1346 @@
+
+
+
+
+AVT Working Group L. Barbato
+Internet-Draft Xiph.Org
+Expires: April 18, 2006 October 15, 2005
+
+
+ draft-ietf-avt-vorbis-rtp-01
+ RTP Payload Format for Vorbis Encoded Audio
+
+Status of this Memo
+
+ This document is an Internet-Draft and is subject to all provisions
+ of Section 3 of RFC 3667. By submitting this Internet-Draft, each
+ author represents that any applicable patent or other IPR claims of
+ which he or she is aware have been or will be disclosed, and any of
+ which he or she become aware will be disclosed, in accordance with
+ RFC 3668.
+
+ Internet-Drafts are working documents of the Internet Engineering
+ Task Force (IETF), its areas, and its working groups. Note that
+ other groups may also distribute working documents as Internet-
+ Drafts.
+
+ Internet-Drafts are draft documents valid for a maximum of six months
+ and may be updated, replaced, or obsoleted by other documents at any
+ time. It is inappropriate to use Internet-Drafts as reference
+ material or to cite them other than as "work in progress."
+
+ The list of current Internet-Drafts can be accessed at
+ http://www.ietf.org/ietf/1id-abstracts.txt.
+
+ The list of Internet-Draft Shadow Directories can be accessed at
+ http://www.ietf.org/shadow.html.
+
+ This Internet-Draft will expire on April 18, 2006.
+
+Copyright Notice
+
+ Copyright (C) The Internet Society (2005).
+
+Abstract
+
+ This document describes an RTP payload format for transporting Vorbis
+ encoded audio. It details the RTP encapsulation mechanism for raw
+ Vorbis data and details the delivery mechanisms for the decoder
+ probability model, referred to as a codebook and other setup
+ information.
+
+ Also included within the document are the necessary details for the
+
+
+
+Barbato Expires April 18, 2006 [Page 1]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ use of Vorbis with MIME and Session Description Protocol (SDP).
+
+Editors Note
+
+ All references to RFC XXXX are to be replaced by references to the
+ RFC number of this memo, when published.
+
+
+Table of Contents
+
+ 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
+ 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
+ 2. Payload Format . . . . . . . . . . . . . . . . . . . . . . . . 3
+ 2.1. RTP Header . . . . . . . . . . . . . . . . . . . . . . . . 3
+ 2.2. Payload Header . . . . . . . . . . . . . . . . . . . . . . 5
+ 2.3. Payload Data . . . . . . . . . . . . . . . . . . . . . . . 6
+ 2.4. Example RTP Packet . . . . . . . . . . . . . . . . . . . . 7
+ 3. Configuration Headers . . . . . . . . . . . . . . . . . . . . 8
+ 3.1. In-band Header Transmission . . . . . . . . . . . . . . . 9
+ 3.1.1. Packed Configuration . . . . . . . . . . . . . . . . . 9
+ 3.2. Packed Headers Delivery . . . . . . . . . . . . . . . . . 10
+ 3.2.1. Packed Headers IANA Considerations . . . . . . . . . . 11
+ 3.3. Loss of Configuration Headers . . . . . . . . . . . . . . 12
+ 4. Comment Headers . . . . . . . . . . . . . . . . . . . . . . . 12
+ 5. Frame Packetizing . . . . . . . . . . . . . . . . . . . . . . 13
+ 5.1. Example Fragmented Vorbis Packet . . . . . . . . . . . . . 13
+ 5.2. Packet Loss . . . . . . . . . . . . . . . . . . . . . . . 16
+ 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17
+ 6.1. Mapping MIME Parameters into SDP . . . . . . . . . . . . . 18
+ 7. Congestion Control . . . . . . . . . . . . . . . . . . . . . . 19
+ 8. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
+ 8.1. Stream Radio . . . . . . . . . . . . . . . . . . . . . . . 19
+ 9. Security Considerations . . . . . . . . . . . . . . . . . . . 20
+ 10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20
+ 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21
+ 11.1. Normative References . . . . . . . . . . . . . . . . . . . 21
+ 11.2. Informative References . . . . . . . . . . . . . . . . . . 21
+ Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 23
+ Intellectual Property and Copyright Statements . . . . . . . . . . 24
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 2]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+1. Introduction
+
+ Vorbis is a general purpose perceptual audio codec intended to allow
+ maximum encoder flexibility, thus allowing it to scale competitively
+ over an exceptionally wide range of bitrates. At the high quality/
+ bitrate end of the scale (CD or DAT rate stereo, 16/24 bits), it is
+ in the same league as MPEG-2 and MPC. Similarly, the version 1.1
+ reference encoder can encode high-quality CD and DAT rate stereo at
+ below 48k bits/sec without resampling to a lower rate. Vorbis is
+ also intended for lower and higher sample rates (from 8kHz telephony
+ to 192kHz digital masters) and a range of channel representations
+ (monaural, polyphonic, stereo, quadraphonic, 5.1, ambisonic, or up to
+ 255 discrete channels).
+
+ Vorbis encoded audio is generally encapsulated within an Ogg format
+ bitstream [1], which provides framing and synchronization. For the
+ purposes of RTP transport, this layer is unnecessary, and so raw
+ Vorbis packets are used in the payload.
+
+1.1. Terminology
+
+ The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
+ "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
+ document are to be interpreted as described in RFC 2119 [2].
+
+
+2. Payload Format
+
+ For RTP based transportation of Vorbis encoded audio the standard RTP
+ header is followed by a 4 octet payload header, then the payload
+ data. The payload headers are used to associate the Vorbis data with
+ its associated decoding codebooks as well as indicating if the
+ following packet contains fragmented Vorbis data and/or the the
+ number of whole Vorbis data frames. The payload data contains the
+ raw Vorbis bitstream information.
+
+2.1. RTP Header
+
+ The format of the RTP header is specified in [3] and shown in Figure
+ Figure 1. This payload format uses the fields of the header in a
+ manner consistent with that specification.
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 3]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | sequence number |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | timestamp |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 1: RTP Header
+
+ The RTP header begins with an octet of fields (V, P, X, and CC) to
+ support specialized RTP uses (see [3] and [4] for details). For
+ Vorbis RTP, the following values are used.
+
+ Version (V): 2 bits
+
+ This field identifies the version of RTP. The version used by this
+ specification is two (2).
+
+ Padding (P): 1 bit
+
+ Padding MAY be used with this payload format according to section 5.1
+ of [3].
+
+ Extension (X): 1 bit
+
+ The Extension bit is used in accordance with [3].
+
+ CSRC count (CC): 4 bits
+
+ The CSRC count is used in accordance with [3].
+
+ Marker (M): 1 bit
+
+ Set to zero. Audio silence suppression not used. This conforms to
+ section 4.1 of [12].
+
+ Payload Type (PT): 7 bits
+
+ An RTP profile for a class of applications is expected to assign a
+ payload type for this format, or a dynamically allocated payload type
+ SHOULD be chosen which designates the payload as Vorbis.
+
+
+
+
+Barbato Expires April 18, 2006 [Page 4]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Sequence number: 16 bits
+
+ The sequence number increments by one for each RTP data packet sent,
+ and may be used by the receiver to detect packet loss and to restore
+ packet sequence. This field is detailed further in [3].
+
+ Timestamp: 32 bits
+
+ A timestamp representing the sampling time of the first sample of the
+ first Vorbis packet in the RTP packet. The clock frequency MUST be
+ set to the sample rate of the encoded audio data and is conveyed out-
+ of-band as a SDP attribute.
+
+ SSRC/CSRC identifiers:
+
+ These two fields, 32 bits each with one SSRC field and a maximum of
+ 16 CSRC fields, are as defined in [3].
+
+2.2. Payload Header
+
+ After the RTP Header section the following 4 octets are the Payload
+ Header. This header is split into a number of bitfields detailing
+ the format of the following payload data packets.
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | F |VDT|# pkts.|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 2: Payload Header
+
+ Ident: 24 bits
+
+ This 24 bit field is used to associate the Vorbis data to a decoding
+ Configuration.
+
+ Fragment type (F): 2 bits
+
+ This field is set accordingly the following list
+
+ 0 = Not Fragmented
+ 1 = Start Fragment
+ 2 = Continuation Fragment
+ 3 = End Fragment
+
+ Vorbis Data Type (VDT): 2 bits
+
+
+
+
+Barbato Expires April 18, 2006 [Page 5]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ This field sets the packet payload type for the Vorbis data. There
+ are currently three type of Vorbis payloads.
+
+ 0 = Raw Vorbis payload
+ 1 = Vorbis Packed Configuration payload
+ 2 = Legacy Vorbis Comment payload
+ 3 = Reserved
+
+ The last 4 bits are the number of complete packets in this payload.
+ This provides for a maximum number of 15 Vorbis packets in the
+ payload. If the packet contains fragmented data the number of
+ packets MUST be set to 0.
+
+2.3. Payload Data
+
+ Raw Vorbis packets are unbounded in length currently, although at
+ some future point there will likely be a practical limit placed on
+ them. Typical Vorbis packet sizes are from very small (2-3 bytes) to
+ quite large (8-12 kilobytes). The reference implementation [11]
+ typically produces packets less than ~800 bytes, except for the setup
+ header packets which are ~4-12 kilobytes. Within an RTP context the
+ maximum packet size, including the RTP and payload headers, SHOULD be
+ kept below the path MTU to avoid packet fragmentation.
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis packet data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 3: Payload Data Header
+
+ Each Vorbis payload packet starts with a two octet length header,
+ which is used to represent the size of the following data payload,
+ followed by the raw Vorbis data padded to the nearest byte boundary.
+
+ For payloads which consist of multiple Vorbis packets the payload
+ data consists of the packet length followed by the packet data for
+ each of the Vorbis packets in the payload.
+
+ The Vorbis packet length header is the length of the Vorbis data
+ block only and does not count the length field.
+
+ The payload packing of the Vorbis data packets MUST follow the
+ guidelines set-out in [4] where the oldest packet occurs immediately
+ after the RTP packet header.
+
+ Channel mapping of the audio is in accordance with BS. 775-1 ITU-R
+
+
+
+Barbato Expires April 18, 2006 [Page 6]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ [14].
+
+2.4. Example RTP Packet
+
+ Here is an example RTP packet containing two Vorbis packets.
+
+ RTP Packet Header:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | 2 |0|0| 0 |0| PT | sequence number |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | timestamp (in sample rate units) |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronisation source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 4: Example Packet (RTP Headers)
+
+ Payload Data:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 0 | 2 pks |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | next vorbis packet data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 5: Example Packet (Payload Data)
+
+ The payload data section of the RTP packet starts with the 24 bit
+ Ident field followed by the one octet bitfield header, which has the
+ number of Vorbis frames set to 2. Each of the Vorbis data frames is
+ prefixed by the two octet length field. The Packet Type and Fragment
+ Type are set to 0. The decode Configuration that will be used to
+ decode the packets is the one indexed by the ident value.
+
+
+
+
+Barbato Expires April 18, 2006 [Page 7]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+3. Configuration Headers
+
+ Unlike other mainstream audio codecs Vorbis has no statically
+ configured probability model. Instead, it packs all entropy decoding
+ configuration, VQ and Huffman models into a data block that must be
+ transmitted to the decoder along with the compressed data. A decoder
+ also requires identification information detailing the number of
+ audio channels, bitrates and other information to configure itself
+ for a particular compressed data stream. These two blocks of
+ information are often referred to collectively as the "codebooks" for
+ a Vorbis stream, and are nominally included as special "header"
+ packets at the start of the compressed data.
+
+ Thus these two codebook header packets must be received by the
+ decoder before any audio data can be interpreted. In addition, the
+ Vorbis I specification [12] requires the presense of a comment header
+ packet which gives simple metadata about the stream. This
+ requirement poses problems in RTP, which is often used over
+ unreliable transports.
+
+ Since this information must be transmitted reliably, and as the RTP
+ stream may change certain configuration data mid-session there are
+ different methods for delivering this configuration data to a client,
+ both in-band and out-of-band which is detailed below. SDP delivery
+ is used to setup an initial state for the client application. The
+ changes may be due to different codebooks as well as different
+ bitrates of the stream.
+
+ The delivery vectors in use are specified by an SDP attribute to
+ indicate the method and the optional URI where the Vorbis Packed
+ Configuration (Section 3.1.1) Packets could be fetched. Different
+ delivery methods MAY be advertised for the same session. The in-band
+ Configuration delivery SHOULD be considered as baseline, out-of-band
+ delivery methods that don't use RTP will not be described in this
+ document. For non chained streams, the Configuration delivery method
+ RECOMMENDED is inline the Packed Configuration (Section 3.1.1) in the
+ SDP as explained in the IANA considerations (Section 6.1) section.
+
+ The 24 bit Ident field is used to map which Configuration will be
+ used to decodea packet. When the Ident field changes, it indicates
+ that a change in the stream has taken place. The client application
+ MUST have in advance the correct configuration and if the client
+ detects a change in the Ident value and does not have this
+ information it MUST NOT decode the raw Vorbis data associated until
+ it fetches the correct Configuration.
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 8]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+3.1. In-band Header Transmission
+
+ The Packed Configuration (Section 3.1.1) Payload is sent in-band with
+ the packet type bits set to match the payload type. Clients MUST be
+ capable of dealing with fragmentation and periodic re-transmission of
+ the configuration headers.
+
+3.1.1. Packed Configuration
+
+ A Vorbis Packed Configuration is indicated with the payload type
+ field set to 1. Of the three headers, defined in the Vorbis I
+ specification [12], the identification and the setup will be packed
+ together, the comment header is completely suppressed. Is up to the
+ client provide a minimal size comment header to the decoder if
+ required by the implementation.
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | xxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 1 | 1|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Setup length | Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. | Setup ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 6: Packed Configuration Figure
+
+
+
+
+Barbato Expires April 18, 2006 [Page 9]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ The Ident field is set with the value that will be used by the Raw
+ Payload Packets to address this Configuration. The Fragment type is
+ set to 0 since the packet bears the full Packed configuration, the
+ number of packet is set to 1
+
+3.2. Packed Headers Delivery
+
+ As mentioned above the RECOMMENDED delivery vector for Vorbis
+ configuration data is via a retrieval method that can be performed
+ using a reliable transport protocol. As the RTP headers are not
+ required for this method of delivery the structure of the
+ configuration data is slightly different. The packed header starts
+ with a 32 bit count field which details the number of packed headers
+ that are contained in the bundle. Next is the Packed header payload
+ for each chained Vorbis stream.
+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Number of packed headers |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Packed header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Packed header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 7: Packed Headers Overview
+
+ Since the Configuration Ident and the Identification Header are fixed
+ length there is only a 2 byte Setup Length tag to define the length
+ of the Setup header.
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Length | Identification Header ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification Header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Setup Header ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup Header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 8: Packed Headers Detail
+
+
+
+
+Barbato Expires April 18, 2006 [Page 10]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ The key difference between the in-band format is there is no need for
+ the payload header octet.
+
+3.2.1. Packed Headers IANA Considerations
+
+ The following IANA considerations MUST only be applied to the packed
+ headers.
+
+ MIME media type name: audio
+
+ MIME subtype: vorbis-config
+
+ Required Parameters:
+
+ None.
+
+ Optional Parameters:
+
+ None.
+
+ Encoding considerations:
+
+ This type is only defined for transfer via non RTP protocols as
+ specified in RFC XXXX.
+
+ Security Considerations:
+
+ See Section 6 of RFC 3047.
+
+ Interoperability considerations: none
+
+ Published specification:
+
+ See RFC XXXX for details.
+
+ Applications which use this media type:
+
+ Vorbis encoded audio, configuration data.
+
+ Additional information: none
+
+ Person & email address to contact for further information:
+
+ Luca Barbato: <lu_zero at gentoo.org>
+
+ Intended usage: COMMON
+
+ Author/Change controller:
+
+
+
+Barbato Expires April 18, 2006 [Page 11]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Author: Luca Barbato
+
+ Change controller: IETF AVT Working Group
+
+3.3. Loss of Configuration Headers
+
+ Unlike the loss of raw Vorbis payload data, loss of a configuration
+ header can lead to a situation where it will not be possible to
+ successfully decode the stream.
+
+ Loss of Configuration Packet results in the halting of stream
+ decoding and SHOULD be reported to the client as well as a loss
+ report sent via RTCP.
+
+
+4. Comment Headers
+
+ With the payload type flag set to 2, this indicates that the packet
+ contain the comment metadata, such as artist name, track title and so
+ on. These metadata messages are not intended to be fully descriptive
+ but to offer basic track/song information. Clients MAY ignore it
+ completely. The details on the format of the comments can be found
+ in the Vorbis documentation [12].
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | xxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 2 | 1|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | Comment ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Comment ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Comment |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 9: Comment Packet
+
+
+
+
+Barbato Expires April 18, 2006 [Page 12]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ The 2 bytes length field is necessary since this packet could be
+ fragmented.
+
+
+5. Frame Packetizing
+
+ Each RTP packet contains either one Vorbis packet fragment, or an
+ integer number of complete Vorbis packets (up to a max of 15 packets,
+ since the number of packets is defined by a 4 bit value).
+
+ Any Vorbis data packet that is less than path MTU SHOULD be bundled
+ in the RTP packet with as many Vorbis packets as will fit, up to a
+ maximum of 15. Path MTU is detailed in [6] and [7].
+
+ If a Vorbis packet, not only data but also Configuration and Comment,
+ is larger than 65535 octets it MUST be fragmented. A fragmented
+ packet has a zero in the last four bits of the payload header. The
+ first fragment will set the Fragment type to 1. Each fragment after
+ the first will set the Fragment type to 2 in the payload header. The
+ RTP packet containing the last fragment of the Vorbis packet will
+ have the Fragment type set to 3. To maintain the correct sequence
+ for fragmented packet reception the timestamp field of fragmented
+ packets MUST be the same as the first packet sent, with the sequence
+ number incremented as normal for the subsequent RTP packets.
+
+5.1. Example Fragmented Vorbis Packet
+
+ Here is an example fragmented Vorbis packet split over three RTP
+ packets. Each packet contains the standard RTP headers as well as
+ the 4 octet Vorbis headers.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 13]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Packet 1:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1000 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 1 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 10: Example Fragmented Packet (Packet 1)
+
+ In this packet the initial sequence number is 1000 and the timestamp
+ is xxxxx. The Fragment type is set to 1, the number of packets field
+ is set to 0, and as the payload is raw Vorbis data the VDT field is
+ set to 0.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 14]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Packet 2:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1001 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 2 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 11: Example Fragmented Packet (Packet 2)
+
+ The Fragment type field is set to 2 and the number of packets field
+ is set to 0. For large Vorbis fragments there can be several of
+ these type of payload packets. The maximum packet size SHOULD be no
+ greater than the path MTU, including all RTP and payload headers.
+ The sequence number has been incremented by one but the timestamp
+ field remains the same as the initial packet.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 15]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Packet 3:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1002 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 3 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+ Figure 12: Example Fragmented Packet (Packet 3)
+
+ This is the last Vorbis fragment packet. The Fragment type is set to
+ 3 and the packet count remains set to 0. As in the previous packets
+ the timestamp remains set to the first packet in the sequence and the
+ sequence number has been incremented.
+
+5.2. Packet Loss
+
+ As there is no error correction within the Vorbis stream, packet loss
+ will result in a loss of signal. Packet loss is more of an issue for
+ fragmented Vorbis packets as the client will have to cope with the
+ handling of the Fragment Type. In case of loss of fragments the
+ client MUST discard all the remaining fragments and decode the
+ incomplete packet. If we use the fragmented Vorbis packet example
+ above and the first packet is lost the client MUST detect that the
+ next packet has the packet count field set to 0 and the Fragment type
+ 2 and MUST drop it. The next packet, which is the final fragmented
+ packet, MUST be dropped in the same manner. If the missing packet is
+ the last, the received two fragments will be kept and the incomplete
+ vorbis packet decoded. Feedback reports on lost and dropped packets
+ MUST be sent back via RTCP.
+
+ If a particular multicast session has a large number of participants
+ care must be taken to prevent an RTCP feedback implosion, [10], in
+ the event of packet loss from a large number of participants.
+
+
+
+Barbato Expires April 18, 2006 [Page 16]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Loss of any of the configuration headers, detailed below, is dealt
+ with in the Loss of Configuration Headers Section later.
+
+
+6. IANA Considerations
+
+ MIME media type name: audio
+
+ MIME subtype: vorbis
+
+ Required Parameters:
+
+ delivery-method: indicates the delivery methods in use, the possible
+ values are:inline, in_band, out_band
+
+ configuration: the base16 [9] (hexadecimal) representation of the
+ Packed Headers (Section 3.2).
+
+ Optional Parameters:
+
+ configuration-uri: the URI of the configuration headers in case of
+ out of band transmission. In the form of
+ "protocol://path/to/resource/". Depending on the specific method the
+ single ident packet could be retrived by their number, or aggregated
+ in a single stream.
+
+ Encoding considerations:
+
+ This type is only defined for transfer via RTP as specified in RFC
+ XXXX.
+
+ Security Considerations:
+
+ See Section 6 of RFC 3047.
+
+ Interoperability considerations: none
+
+ Published specification:
+
+ See the Vorbis documentation [12] for details.
+
+ Applications which use this media type:
+
+ Audio streaming and conferencing tools
+
+ Additional information: none
+
+ Person & email address to contact for further information:
+
+
+
+Barbato Expires April 18, 2006 [Page 17]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ Luca Barbato: <lu_zero at gentoo.org>
+
+ Intended usage: COMMON
+
+ Author/Change controller:
+
+ Author: Luca Barbato
+
+ Change controller: IETF AVT Working Group
+
+6.1. Mapping MIME Parameters into SDP
+
+ The information carried in the MIME media type specification has a
+ specific mapping to fields in the Session Description Protocol (SDP)
+ [5], which is commonly used to describe RTP sessions. When SDP is
+ used to specify sessions the mapping are as follows:
+
+ o The MIME type ("audio") goes in SDP "m=" as the media name.
+
+ o The MIME subtype ("vorbis") goes in SDP "a=rtpmap" as the encoding
+ name.
+
+ o The parameter "rate" also goes in "a=rtpmap" as clock rate.
+
+ o The parameter "channels" also goes in "a=rtpmap" as channel count.
+
+ o The mandated parameters "delivery-method" and "configuration" MUST
+ be included in the SDP "a=fmpt" attribute.
+
+ o The optional parameter "configuration-uri", when present, MUST be
+ included in the SDP "a=fmpt" attribute.
+
+ If the stream comprises chained Vorbis files and all of them are
+ known in advance, the Configuration Packet for each file SHOULD be
+ passed to the client using the configuration attribute.
+
+ The Vorbis configuration specified in the configuration-uri attribute
+ MUST point to a location where all of the Configuration Packets
+ needed for the life of the session reside.
+
+ The port value is specified by the server application bound to the
+ address specified in the c attribute. The bitrate value and channels
+ specified in the rtpmap attribute MUST match the Vorbis sample rate
+ value. An example is found below.
+
+ c=IN IP4/6
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 18]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ m=audio RTP/AVP 98
+ a=rtpmap:98 VORBIS/44100/2
+ a=delivery:out_band/http
+ a=fmtp:98 delivery-method:in_band,out_band/http;
+ configuration=base16string1;
+ configuration-uri=http://path/to/the/resource
+
+ Note that the payload format (encoding) names are commonly shown in
+ upper case. MIME subtypes are commonly shown in lower case. These
+ names are case-insensitive in both places. Similarly, parameter
+ names are case-insensitive both in MIME types and in the default
+ mapping to the SDP a=fmtp attribute. The exception regarding case
+ sensitivity is the configuration-uri URI which MUST be regarded as
+ being case sensitive.
+
+ The answer to any offer, [8], MUST NOT change the URI specified in
+ the configuration-uri attribute.
+
+
+7. Congestion Control
+
+ Vorbis clients SHOULD send regular receiver reports detailing
+ congestion. A mechanism for dynamically downgrading the stream,
+ known as bitrate peeling, will allow for a graceful backing off of
+ the stream bitrate. This feature is not available at present so an
+ alternative would be to redirect the client to a lower bitrate stream
+ if one is available.
+
+ If a particular multicast session has a large number of participants
+ care must be taken to prevent an RTCP feedback implosion, [10], in
+ the event of congestion.
+
+
+8. Examples
+
+ The following examples are common usage patterns that MAY be applied
+ in such situations, the main scope of this section is to explain
+ better usage of the transmission vectors.
+
+8.1. Stream Radio
+
+ That is one of the most common situation: one single server streaming
+ content in multicast, the clients may start a session at random time.
+ The content itself could be a mix of live stream as the dj's speech
+ and stored streams as the music she plays.
+
+ In this situation we don't know in advance how many codebooks we will
+ use and. The clients can join anytime and users expect to start
+
+
+
+Barbato Expires April 18, 2006 [Page 19]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ listening to the content in a short time
+
+ On join the client will receive the current Configuration necessary
+ to decode the current stream inlined in the SDP. And can start
+ decoding the current stream.
+
+ When the streamed content changes the new Configuration is sent in-
+ band befoe the actual stream, and the Configuration that has to be
+ sent inline in the SDP updated.
+
+ A serverside optimization would be keep an hash list of the
+ Configurations per session to avoid packing them and send the same
+ Configuration with different Ident tags
+
+ A clientside optimization would be keep a tag list of the
+ Configurations per session and don't process configuration packets
+ already known.
+
+ Let's assume that the client playout buffer can store at least 7
+ packets and that is the maximum latency.
+
+
+9. Security Considerations
+
+ RTP packets using this payload format are subject to the security
+ considerations discussed in the RTP specification [3]. This implies
+ that the confidentiality of the media stream is achieved by using
+ encryption. Because the data compression used with this payload
+ format is applied end-to-end, encryption may be performed on the
+ compressed data. Where the size of a data block is set care MUST be
+ taken to prevent buffer overflows in the client applications.
+
+
+10. Acknowledgments
+
+ This document is a continuation of draft-moffitt-vorbis-rtp-00.txt
+ and draft-kerr-avt-vorbis-rtp-04.txt. The MIME type section is a
+ continuation of draft-short-avt-rtp-vorbis-mime-00.txt.
+
+ Thanks to the AVT, Ogg Vorbis Communities / Xiph.org including Steve
+ Casner, Aaron Colwell, Ross Finlayson, Fluendo, Ramon Garcia, Pascal
+ Hennequin, Ralph Giles, Tor-Einar Jarnbjo, Colin Law, John Lazzaro,
+ Jack Moffitt, Christopher Montgomery, Colin Perkins, Barry Short,
+ Mike Smith, Phil Kerr, Michael Sparks, Magnus Westerlund, David
+ Barrett, Silvia Pfeiffer, Politecnico di Torino (LS)^3/IMG Group in
+ particular Federico Ridolfo, Francesco Varano, Giampaolo Mancini,
+ Juan Carlos De Martin.
+
+
+
+
+Barbato Expires April 18, 2006 [Page 20]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+11. References
+
+11.1. Normative References
+
+ [1] Pfeiffer, S., "The Ogg Encapsulation Format Version 0",
+ RFC 3533.
+
+ [2] Bradner, S., "Key words for use in RFCs to Indicate Requirement
+ Levels", RFC 2119.
+
+ [3] Schulzrinne, H., Casner, S., Frederick, R., and V. Jacobson,
+ "RTP: A Transport Protocol for real-time applications",
+ RFC 3550.
+
+ [4] Schulzrinne, H. and S. Casner, "RTP Profile for Audio and Video
+ Conferences with Minimal Control.", RFC 3551.
+
+ [5] Handley, M. and V. Jacobson, "SDP: Session Description
+ Protocol", RFC 2327.
+
+ [6] Mogul et al., J., "Path MTU Discovery", RFC 1063.
+
+ [7] McCann et al., J., "Path MTU Discovery for IP version 6",
+ RFC 1981.
+
+ [8] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with
+ Session Description Protocol (SDP)", RFC 3264.
+
+ [9] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings",
+ RFC 3548.
+
+ [10] Ott, J., Wenger, S., Sato, N., Burmeister, C., and J. Rey,
+ "Extended RTP Profile for RTCP-based Feedback (RTP/AVPF)",
+ Internet Draft (draft-ietf-avt-rtcp-feedback-11: Work in
+ progress).
+
+11.2. Informative References
+
+ [11] "libvorbis: Available from the Xiph website,
+ http://www.xiph.org".
+
+ [12] "Ogg Vorbis I specification: Codec setup and packet decode.
+ Available from the Xiph website, http://www.xiph.org".
+
+ [13] "Ogg Vorbis I specification: Comment field and header
+ specification. Available from the Xiph website,
+ http://www.xiph.org".
+
+
+
+
+Barbato Expires April 18, 2006 [Page 21]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+ [14] "ITU (1992-1994) ITU-R Recommendation BS. 775-1 Multi-channel
+ stereophonic sound system with or without accompanying
+ picture. International Telecommunications Union. Available from
+ the ITU website, http://www.itu.int".
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 22]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+Author's Address
+
+ Luca Barbato
+ Xiph.Org
+
+ Email: lu_zero at gentoo.org
+ URI: http://www.xiph.org/
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Barbato Expires April 18, 2006 [Page 23]
+
+Internet-Draft draft-ietf-avt-vorbis-rtp-01 October 2005
+
+
+Intellectual Property Statement
+
+ The IETF takes no position regarding the validity or scope of any
+ Intellectual Property Rights or other rights that might be claimed to
+ pertain to the implementation or use of the technology described in
+ this document or the extent to which any license under such rights
+ might or might not be available; nor does it represent that it has
+ made any independent effort to identify any such rights. Information
+ on the procedures with respect to rights in RFC documents can be
+ found in BCP 78 and BCP 79.
+
+ Copies of IPR disclosures made to the IETF Secretariat and any
+ assurances of licenses to be made available, or the result of an
+ attempt made to obtain a general license or permission for the use of
+ such proprietary rights by implementers or users of this
+ specification can be obtained from the IETF on-line IPR repository at
+ http://www.ietf.org/ipr.
+
+ The IETF invites any interested party to bring to its attention any
+ copyrights, patents or patent applications, or other proprietary
+ rights that may cover technology that may be required to implement
+ this standard. Please address the information to the IETF at
+ ietf-ipr at ietf.org.
+
+
+Disclaimer of Validity
+
+ This document and the information contained herein are provided on an
+ "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+ OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
+ ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
+ INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
+ INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+ WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+
+Copyright Statement
+
+ Copyright (C) The Internet Society (2005). This document is subject
+ to the rights, licenses and restrictions contained in BCP 78, and
+ except as set forth therein, the authors retain all their rights.
+
+
+Acknowledgment
+
+ Funding for the RFC Editor function is currently provided by the
+ Internet Society.
+
+
+
+
+Barbato Expires April 18, 2006 [Page 24]
+
+
Copied: trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.xml (from rev 10212, trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml)
===================================================================
--- trunk/vorbis/doc/draft-ietf-avt-vorbis-rtp-01.xml 2005-10-20 15:47:42 UTC (rev 10212)
+++ trunk/vorbis/doc/draft-kerr-avt-vorbis-rtp-05.xml 2005-10-20 17:21:37 UTC (rev 10214)
@@ -0,0 +1,1044 @@
+<?xml version='1.0'?>
+<!DOCTYPE rfc SYSTEM 'rfc2629.dtd'>
+<?rfc toc="yes" ?>
+<?rfc compact='yes'?>
+
+<rfc ipr="full3667" docName="RTP Payload Format for Vorbis Encoded Audio">
+
+<front>
+<title>draft-ietf-avt-vorbis-rtp-01</title>
+
+<author initials="L" surname="Barbato" fullname="Luca Barbato">
+<organization>Xiph.Org</organization>
+<address>
+<email>lu_zero at gentoo.org</email>
+<uri>http://www.xiph.org/</uri>
+</address>
+</author>
+
+<date day="15" month="October" year="2005" />
+
+<area>General</area>
+<workgroup>AVT Working Group</workgroup>
+<keyword>I-D</keyword>
+
+<keyword>Internet-Draft</keyword>
+<keyword>Vorbis</keyword>
+<keyword>RTP</keyword>
+
+<abstract>
+<t>
+This document describes an RTP payload format for transporting Vorbis encoded audio. It details the RTP encapsulation mechanism for raw Vorbis data and details the delivery mechanisms for the decoder probability model, referred to as a codebook and other setup information.
+</t>
+
+<t>
+Also included within the document are the necessary details for the use of Vorbis with MIME and Session Description Protocol (SDP).
+</t>
+
+</abstract>
+
+<note title="Editors Note">
+<t>
+All references to RFC XXXX are to be replaced by references to the RFC number of this memo, when published.
+</t>
+</note>
+
+</front>
+
+<middle>
+
+<section anchor="Introduction" title="Introduction">
+
+<t>
+Vorbis is a general purpose perceptual audio codec intended to allow
+maximum encoder flexibility, thus allowing it to scale competitively
+over an exceptionally wide range of bitrates. At the high
+quality/bitrate end of the scale (CD or DAT rate stereo, 16/24 bits), it
+is in the same league as MPEG-2 and MPC.
+Similarly, the version 1.1 reference encoder can encode high-quality CD
+and DAT rate stereo at below 48k bits/sec without resampling to a lower
+rate. Vorbis is also intended for lower and higher sample rates (from
+8kHz telephony to 192kHz digital masters) and a range of channel
+representations (monaural, polyphonic, stereo, quadraphonic, 5.1,
+ambisonic, or up to 255 discrete channels).
+</t>
+
+<t>
+Vorbis encoded audio is generally encapsulated within an Ogg format bitstream <xref target="rfc3533"></xref>, which provides
+framing and synchronization. For the purposes of RTP transport, this layer is unnecessary, and so raw Vorbis packets are used
+in the payload.
+</t>
+
+<section anchor="Terminology" title="Terminology">
+
+<t>
+The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL"
+in this document are to be interpreted as described in RFC 2119 <xref target="rfc2119"></xref>.
+</t>
+
+</section>
+</section>
+
+<section anchor="Payload Format" title="Payload Format">
+
+<t>
+For RTP based transportation of Vorbis encoded audio the standard RTP header is followed by a 4 octet payload header, then the payload data. The payload headers are used to associate the Vorbis data with its associated decoding codebooks as well as indicating if the following packet contains fragmented Vorbis data and/or the the number of whole Vorbis data frames. The payload data contains the raw Vorbis bitstream information.
+</t>
+
+<section anchor="RTP Header" title="RTP Header">
+
+<t>
+The format of the RTP header is specified in <xref target="rfc3550"></xref> and shown in Figure <xref target="RTP Header Figure"/>. This payload format uses the fields of the header in a manner consistent with that specification.
+</t>
+
+<t>
+<figure anchor="RTP Header Figure" title="RTP Header">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | sequence number |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | timestamp |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+</t>
+
+<t>
+The RTP header begins with an octet of fields (V, P, X, and CC) to support specialized RTP uses (see <xref target="rfc3550">
+</xref> and <xref target="rfc3551"></xref> for details). For Vorbis RTP, the following values are used.
+</t>
+
+<t>
+Version (V): 2 bits</t>
+<t>
+This field identifies the version of RTP. The version used by this specification is two (2).
+</t>
+
+<t>
+Padding (P): 1 bit</t>
+<t>
+Padding MAY be used with this payload format according to section 5.1 of <xref target="rfc3550"></xref>.
+</t>
+
+<t>
+Extension (X): 1 bit</t>
+<t>
+The Extension bit is used in accordance with <xref target="rfc3550"></xref>.
+</t>
+
+<t>
+CSRC count (CC): 4 bits</t>
+<t>
+The CSRC count is used in accordance with <xref target="rfc3550"></xref>.
+</t>
+
+<t>
+Marker (M): 1 bit</t>
+<t>
+Set to zero. Audio silence suppression not used. This conforms to section 4.1 of <xref target="vorbis-spec-ref"></xref>.
+</t>
+
+<t>
+Payload Type (PT): 7 bits</t>
+<t>
+An RTP profile for a class of applications is expected to assign a payload type for this format, or a dynamically allocated
+payload type SHOULD be chosen which designates the payload as Vorbis.
+</t>
+
+<t>
+Sequence number: 16 bits</t>
+<t>
+The sequence number increments by one for each RTP data packet sent, and may be used by the receiver to detect packet loss and
+to restore packet sequence. This field is detailed further in <xref target="rfc3550"></xref>.
+</t>
+
+<t>
+Timestamp: 32 bits</t>
+<t>
+A timestamp representing the sampling time of the first sample of the first Vorbis packet in the RTP packet. The clock frequency
+MUST be set to the sample rate of the encoded audio data and is conveyed out-of-band as a SDP attribute.
+</t>
+
+<t>
+SSRC/CSRC identifiers: </t>
+<t>
+These two fields, 32 bits each with one SSRC field and a maximum of 16 CSRC fields, are as defined in <xref target="rfc3550">
+</xref>.
+</t>
+
+</section>
+
+<section anchor="Payload Header" title="Payload Header">
+
+<t>
+After the RTP Header section the following 4 octets are the Payload Header. This header is split into a number of bitfields detailing the format of the following payload data packets.
+</t>
+
+<figure anchor="Payload Header Figure" title="Payload Header">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | F |VDT|# pkts.|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+Ident: 24 bits</t>
+<t>
+This 24 bit field is used to associate the Vorbis data to a decoding Configuration.
+</t>
+
+<t>
+Fragment type (F): 2 bits</t>
+<t>
+This field is set accordingly the following list
+</t>
+<vspace blankLines="1" />
+<list style="empty">
+<t> 0 = Not Fragmented</t>
+<t> 1 = Start Fragment</t>
+<t> 2 = Continuation Fragment</t>
+<t> 3 = End Fragment</t>
+</list>
+
+<t>
+Vorbis Data Type (VDT): 2 bits</t>
+<t>
+This field sets the packet payload type for the Vorbis data. There are currently three type of Vorbis payloads.
+</t>
+
+<vspace blankLines="1" />
+<list style="empty">
+<t> 0 = Raw Vorbis payload</t>
+<t> 1 = Vorbis Packed Configuration payload</t>
+<t> 2 = Legacy Vorbis Comment payload</t>
+<t> 3 = Reserved</t>
+</list>
+
+<t>
+The last 4 bits are the number of complete packets in this payload. This provides for a maximum number of 15 Vorbis packets in the payload. If the packet contains fragmented data the number of packets MUST be set to 0.
+</t>
+
+</section>
+
+<section anchor="Payload Data" title="Payload Data">
+
+<t>
+Raw Vorbis packets are unbounded in length currently, although at some future point there will likely be a practical limit placed on them. Typical Vorbis packet sizes are from very small (2-3 bytes) to quite large (8-12 kilobytes). The reference implementation <xref target="libvorbis"></xref> typically produces packets less than ~800 bytes, except for the setup header packets which are ~4-12 kilobytes. Within an RTP context the maximum packet size, including the RTP and payload headers, SHOULD be kept below the path MTU to avoid packet fragmentation.
+</t>
+
+<figure anchor="Payload Data Figure" title="Payload Data Header">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis packet data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+Each Vorbis payload packet starts with a two octet length header, which is used to represent the size of the following data payload, followed by the raw Vorbis data padded to the nearest byte boundary.
+</t>
+
+<t>
+For payloads which consist of multiple Vorbis packets the payload data consists of the packet length followed by the packet data for each of the Vorbis packets in the payload.
+</t>
+
+<t>
+The Vorbis packet length header is the length of the Vorbis data block only and does not count the length field.
+</t>
+
+<t>
+The payload packing of the Vorbis data packets MUST follow the guidelines set-out in <xref target="rfc3551"></xref> where the oldest packet occurs immediately after the RTP packet header.
+</t>
+
+<t>
+Channel mapping of the audio is in accordance with BS. 775-1 ITU-R <xref target="775itu"></xref>.
+</t>
+
+</section>
+
+<section anchor="Example RTP Packet" title="Example RTP Packet">
+
+<t>
+Here is an example RTP packet containing two Vorbis packets.
+</t>
+
+<t>
+RTP Packet Header:
+</t>
+
+<figure anchor="Example Header Packet (RTP Headers)" title="Example Packet (RTP Headers)">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | 2 |0|0| 0 |0| PT | sequence number |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | timestamp (in sample rate units) |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronisation source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+Payload Data:
+</t>
+
+<figure anchor="Example Packet (Payload Data)" title="Example Packet (Payload Data)">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 0 | 2 pks |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | next vorbis packet data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+The payload data section of the RTP packet starts with the 24 bit Ident field followed by the one octet bitfield header, which has the number of Vorbis frames set to 2. Each of the Vorbis data frames is prefixed by the two octet length field. The Packet Type and Fragment Type are set to 0. The decode Configuration that will be used to decode the packets is the one indexed by the ident value.
+</t>
+
+</section>
+</section>
+
+
+
+<section anchor="Configuration Headers" title="Configuration Headers">
+
+<t>
+Unlike other mainstream audio codecs Vorbis has no statically
+configured probability model. Instead, it packs all entropy decoding
+configuration, VQ and Huffman models into a data block that must be
+transmitted to the decoder along with the compressed data. A decoder
+also requires identification information detailing the number of audio
+channels, bitrates and other information to configure itself for a
+particular compressed data stream. These two blocks of information are
+often referred to collectively as the "codebooks" for a Vorbis stream,
+and are nominally included as special "header" packets at the start
+of the compressed data.
+</t>
+
+<t>
+Thus these two codebook header packets must be received by the decoder
+before any audio data can be interpreted. In addition,
+the <xref target="vorbis-spec-ref">Vorbis I specification</xref>
+requires the presense of a comment header packet which gives simple
+metadata about the stream. This requirement poses problems in RTP,
+which is often used over unreliable transports.
+</t>
+
+<t>
+Since this information must be transmitted reliably, and as the RTP
+stream may change certain configuration data mid-session there are
+different methods for delivering this configuration data to a
+client, both in-band and out-of-band which is detailed below. SDP
+delivery is used to setup an initial state for the client application.
+The changes may be due to different codebooks as well as different
+bitrates of the stream.
+</t>
+
+<t>
+The delivery vectors in use are specified by an SDP attribute to indicate the method and the optional URI where the Vorbis <xref target="Packed Configuration">Packed Configuration</xref> Packets could be fetched. Different delivery methods MAY be advertised for the same session. The in-band Configuration delivery SHOULD be considered as baseline, out-of-band delivery methods that don't use RTP will not be described in this document. For non chained streams, the Configuration delivery method RECOMMENDED is inline the <xref target="Packed Configuration">Packed Configuration</xref> in the SDP as explained in the <xref target="Mapping MIME Parameters into SDP"> IANA considerations</xref> section.
+</t>
+
+<t>
+The 24 bit Ident field is used to map which Configuration will be used to decodea packet. When the Ident field changes, it indicates that a change in the stream has taken place. The client application MUST have in advance the correct configuration and if the client detects a change in the Ident value and does not have this information it MUST NOT decode the raw Vorbis data associated until it fetches the correct Configuration.
+</t>
+
+<section anchor="In-band Header Transmission" title="In-band Header Transmission">
+
+<t>
+The <xref target="Packed Configuration">Packed Configuration</xref> Payload is sent in-band with the packet type bits set to match the payload type. Clients MUST be capable of dealing with fragmentation and periodic re-transmission of the configuration headers.
+</t>
+
+<section anchor="Packed Configuration" title="Packed Configuration">
+
+<t>
+A Vorbis Packed Configuration is indicated with the payload type field set to 1. Of the three headers, defined in the <xref target="vorbis-spec-ref">Vorbis I specification</xref>, the identification and the setup will be packed together, the comment header is completely suppressed. Is up to the client provide a minimal size comment header to the decoder if required by the implementation.
+</t>
+
+<figure anchor="Packed Configuration Figure" title="Packed Configuration Figure">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | xxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 1 | 1|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Setup length | Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. | Setup ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>The Ident field is set with the value that will be used by the Raw Payload Packets to address this Configuration. The Fragment type is set to 0 since the packet bears the full Packed configuration, the number of packet is set to 1</t>
+</section>
+
+
+</section>
+
+<section anchor="Packed Headers Delivery" title="Packed Headers Delivery">
+
+<t>
+As mentioned above the RECOMMENDED delivery vector for Vorbis configuration data is via a retrieval method that can be performed using a reliable transport protocol. As the RTP headers are not required for this method of delivery the structure of the configuration data is slightly different. The packed header starts with a 32 bit count field which details the number of packed headers that are contained in the bundle. Next is the Packed header payload for each chained Vorbis stream.
+</t>
+
+<figure anchor="Packed Headers Overview Figure" title="Packed Headers Overview">
+<artwork><![CDATA[
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Number of packed headers |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Packed header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Packed header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+Since the Configuration Ident and the Identification Header are fixed length there is only a 2 byte Setup Length tag to define the length of the Setup header.
+</t>
+
+<figure anchor="Packed Headers Detail Figure" title="Packed Headers Detail">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Length | Identification Header ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Identification Header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Setup Header ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Setup Header |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+<t>
+The key difference between the in-band format is there is no need for the payload header octet.
+</t>
+
+<section anchor="Packed Headers IANA Considerations" title="Packed Headers IANA Considerations">
+
+<t>
+The following IANA considerations MUST only be applied to the packed headers.
+</t>
+
+<t>
+MIME media type name: audio
+</t>
+<t>
+MIME subtype: vorbis-config
+</t>
+
+<t>
+Required Parameters:</t><t>
+None.
+</t>
+
+<t>
+Optional Parameters: </t><t>
+None.
+</t>
+
+<t>
+Encoding considerations:</t><t>
+This type is only defined for transfer via non RTP protocols as specified in RFC XXXX.
+</t>
+
+<t>
+Security Considerations:</t><t>
+See Section 6 of RFC 3047.
+</t>
+
+<t>
+Interoperability considerations: none
+</t>
+
+<t>
+Published specification:</t>
+<t>See RFC XXXX for details.</t>
+
+<t>
+Applications which use this media type:</t><t>
+Vorbis encoded audio, configuration data.
+</t>
+
+<t>
+Additional information: none
+</t>
+
+<t>
+Person & email address to contact for further information:</t><t>
+Luca Barbato: <lu_zero at gentoo.org>
+</t>
+
+<t>
+Intended usage: COMMON
+</t>
+
+<t>Author/Change controller:</t>
+<t>Author: Luca Barbato</t>
+<t>Change controller: IETF AVT Working Group</t>
+
+
+</section>
+</section>
+
+<!--<section anchor="Out-of-band Header Transmission" title="Out-of-band Header Transmission">
+
+<t>
+
+</t>
+
+</section>-->
+
+<section anchor="Loss of Configuration Headers" title="Loss of Configuration Headers">
+
+<t>
+Unlike the loss of raw Vorbis payload data, loss of a configuration header can lead to a situation where it will not be possible to successfully decode the stream.
+</t>
+
+<t>
+Loss of Configuration Packet results in the halting of stream decoding and SHOULD be reported to the client as well as a loss report sent via RTCP.
+</t>
+
+</section>
+
+<!-- <section anchor="Mapping between Configuration and Stream" title="Mapping between Configuration and Stream">
+
+<t>
+The mapping between the stream and the the configuration is explicit.
+</t>
+
+</section> -->
+
+
+</section>
+
+<section anchor="Comment Headers" title="Comment Headers">
+
+<t>
+With the payload type flag set to 2, this indicates that the packet contain the comment metadata, such as artist name, track title and so on. These metadata messages are not intended to be fully descriptive but to offer basic track/song information. Clients MAY ignore it completely. The details on the format of the comments can be found in the <xref target="vorbis-spec-ref">Vorbis documentation</xref>.
+</t>
+<figure anchor="Comment Packet Figure" title="Comment Packet">
+<artwork><![CDATA[
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | xxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 0 | 2 | 1|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | Comment ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Comment ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. Comment |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>The 2 bytes length field is necessary since this packet could be fragmented.</t>
+
+</section>
+<section anchor="Frame Packetizing" title="Frame Packetizing">
+
+<t>
+Each RTP packet contains either one Vorbis packet fragment, or an integer number of complete Vorbis packets (up to a max of 15 packets, since the number of packets is defined by a 4 bit value).
+</t>
+
+<t>
+Any Vorbis data packet that is less than path MTU SHOULD be bundled in the RTP packet with as many Vorbis packets as will fit, up to a maximum of 15. Path MTU is detailed in <xref target="rfc1063"></xref> and <xref target="rfc1981"></xref>.
+</t>
+
+<t>
+If a Vorbis packet, not only data but also Configuration and Comment, is larger than 65535 octets it MUST be fragmented. A fragmented packet has a zero in the last four bits of the payload header. The first fragment will set the Fragment type to 1. Each fragment after the first will set the Fragment type to 2 in the payload header. The RTP packet containing the last fragment of the Vorbis packet will have the Fragment type set to 3. To maintain the correct sequence for fragmented packet reception the timestamp field of fragmented packets MUST be the same as the first packet sent, with the sequence number incremented as normal for the subsequent RTP packets.
+</t>
+
+<section anchor="Example Fragmented Vorbis Packet" title="Example Fragmented Vorbis Packet">
+
+<t>
+Here is an example fragmented Vorbis packet split over three RTP packets. Each packet contains the standard RTP headers as well as the 4 octet Vorbis headers.
+</t>
+
+<figure anchor="Example Fragmented Packet (Packet 1)" title="Example Fragmented Packet (Packet 1)">
+<artwork><![CDATA[
+ Packet 1:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1000 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 1 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+In this packet the initial sequence number is 1000 and the timestamp is xxxxx. The Fragment type is set to 1, the number of packets field is set to 0, and as the payload is raw Vorbis data the VDT field is set to 0.
+</t>
+
+<figure anchor="Example Fragmented Packet (Packet 2)" title="Example Fragmented Packet (Packet 2)">
+<artwork><![CDATA[
+ Packet 2:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1001 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 2 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+The Fragment type field is set to 2 and the number of packets field is set to 0. For large Vorbis fragments there can be several of these type of payload packets. The maximum packet size SHOULD be no greater than the path MTU, including all RTP and payload headers. The sequence number has been incremented by one but the timestamp field remains the same as the initial packet.
+</t>
+
+<figure anchor="Example Fragmented Packet (Packet 3)" title="Example Fragmented Packet (Packet 3)">
+<artwork><![CDATA[
+ Packet 3:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |V=2|P|X| CC |M| PT | 1002 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | xxxxx |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | synchronization source (SSRC) identifier |
+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ | contributing source (CSRC) identifiers |
+ | ... |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ident | 3 | 0 | 0|
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | length | vorbis data ..
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ .. vorbis data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+]]></artwork>
+</figure>
+
+<t>
+This is the last Vorbis fragment packet. The Fragment type is set to 3 and the packet count remains set to 0. As in the previous packets the timestamp remains set to the first packet in the sequence and the sequence number has been incremented.
+</t>
+</section>
+
+<section anchor="Packet Loss" title="Packet Loss">
+
+<t>
+As there is no error correction within the Vorbis stream, packet loss will result in a loss of signal. Packet loss is more of an issue for fragmented Vorbis packets as the client will have to cope with the handling of the Fragment Type. In case of loss of fragments the client MUST discard all the remaining fragments and decode the incomplete packet. If we use the fragmented Vorbis packet example above and the first packet is lost the client MUST detect that the next packet has the packet count field set to 0 and the Fragment type 2 and MUST drop it. The next packet, which is the final fragmented packet, MUST be dropped in the same manner. If the missing packet is the last, the received two fragments will be kept and the incomplete vorbis packet decoded. Feedback reports on lost and dropped packets MUST be sent back via RTCP.
+</t>
+
+<t>
+If a particular multicast session has a large number of participants care must be taken to prevent an RTCP feedback implosion, <xref target="rtcp-feedback"></xref>, in the event of packet loss from a large number of participants.
+</t>
+
+<t>
+Loss of any of the configuration headers, detailed below, is dealt with in the Loss of Configuration Headers Section later.
+</t>
+
+</section>
+</section>
+<section anchor="IANA Considerations" title="IANA Considerations">
+
+<t>
+MIME media type name: audio
+</t>
+<t>
+MIME subtype: vorbis
+</t>
+
+<t>
+Required Parameters:
+</t>
+
+<t>
+delivery-method: indicates the delivery methods in use, the possible values are:inline, in_band, out_band
+</t><t>
+configuration: the <xref target="rfc3548">base16</xref> (hexadecimal) representation of the <xref target="Packed Headers Delivery">Packed Headers</xref>.
+</t>
+
+<t>
+Optional Parameters: </t><t>
+configuration-uri: the URI of the configuration headers in case of out of band transmission. In the form of "protocol://path/to/resource/". Depending on the specific method the single ident packet could be retrived by their number, or aggregated in a single stream.
+</t>
+
+<t>
+Encoding considerations:</t><t>
+This type is only defined for transfer via RTP as specified
+in RFC XXXX.
+</t>
+
+<t>
+Security Considerations:</t><t>
+See Section 6 of RFC 3047.
+</t>
+
+<t>
+Interoperability considerations: none
+</t>
+
+<t>
+Published specification:</t>
+<t>See the Vorbis documentation <xref target="vorbis-spec-ref"></xref> for details.</t>
+
+<t>
+Applications which use this media type:</t><t>
+Audio streaming and conferencing tools
+</t>
+
+<t>
+Additional information: none
+</t>
+
+<t>
+Person & email address to contact for further information:</t><t>
+Luca Barbato: <lu_zero at gentoo.org>
+</t>
+
+<t>
+Intended usage: COMMON
+</t>
+
+<t>Author/Change controller:</t>
+<t>Author: Luca Barbato</t>
+<t>Change controller: IETF AVT Working Group</t>
+
+<section anchor="Mapping MIME Parameters into SDP" title="Mapping MIME Parameters into SDP">
+
+<t>
+The information carried in the MIME media type specification has a specific mapping to fields in the Session Description Protocol (SDP) <xref target="rfc2327"></xref>, which is commonly used to describe RTP sessions. When SDP is used to specify sessions the mapping are as follows:
+</t>
+
+<vspace blankLines="1" />
+<list style="symbols">
+
+<t>The MIME type ("audio") goes in SDP "m=" as the media name.</t>
+<vspace blankLines="1" />
+
+<t>The MIME subtype ("vorbis") goes in SDP "a=rtpmap" as the encoding name.</t>
+<vspace blankLines="1" />
+
+<t>The parameter "rate" also goes in "a=rtpmap" as clock rate.</t>
+<vspace blankLines="1" />
+
+<t>The parameter "channels" also goes in "a=rtpmap" as channel count.</t>
+<vspace blankLines="1" />
+
+<t>The mandated parameters "delivery-method" and "configuration" MUST be included in the SDP "a=fmpt" attribute.</t>
+<vspace blankLines="1" />
+
+<t>The optional parameter "configuration-uri", when present, MUST be included in the SDP "a=fmpt" attribute.</t>
+
+</list>
+
+<t>
+If the stream comprises chained Vorbis files and all of them are known in advance, the Configuration Packet for each file SHOULD be passed to the client using the configuration attribute.
+</t>
+
+<t>
+The Vorbis configuration specified in the configuration-uri attribute MUST point to a location where all of the Configuration Packets needed for the life of the session reside.
+</t>
+
+<t>
+The port value is specified by the server application bound to the address specified in the c attribute. The bitrate value and channels specified in the rtpmap attribute MUST match the Vorbis sample rate value. An example is found below.
+</t>
+
+<vspace blankLines="1" />
+<list style="empty">
+<t>c=IN IP4/6 </t>
+<t>m=audio RTP/AVP 98</t>
+<t>a=rtpmap:98 VORBIS/44100/2</t>
+<t>a=delivery:out_band/http</t>
+<t>a=fmtp:98 delivery-method:in_band,out_band/http; configuration=base16string1; configuration-uri=http://path/to/the/resource</t>
+</list>
+
+<t>
+Note that the payload format (encoding) names are commonly shown in upper case. MIME subtypes are commonly shown in lower case. These names are case-insensitive in both places. Similarly, parameter names are case-insensitive both in MIME types and in the default mapping to the SDP a=fmtp attribute. The exception regarding case sensitivity is the configuration-uri URI which MUST be regarded as being case sensitive.
+</t>
+
+<t>
+The answer to any offer, <xref target="rfc3264"></xref>, MUST NOT change the URI specified in the configuration-uri attribute.
+</t>
+
+</section>
+</section>
+
+
+<section anchor="Congestion Control" title="Congestion Control">
+
+<t>
+Vorbis clients SHOULD send regular receiver reports detailing congestion. A mechanism for dynamically downgrading the stream,
+known as bitrate peeling, will allow for a graceful backing off of the stream bitrate. This feature is not available at present
+so an alternative would be to redirect the client to a lower bitrate stream if one is available.
+</t>
+
+<t>
+If a particular multicast session has a large number of participants care must be taken to prevent an RTCP feedback implosion,
+<xref target="rtcp-feedback"></xref>, in the event of congestion.
+</t>
+
+</section>
+
+<section anchor="Examples" title="Examples">
+
+<t>
+The following examples are common usage patterns that MAY be applied in such situations, the main scope of this section is to explain better usage of the transmission vectors.
+</t>
+
+<section anchor="Stream Radio" title="Stream Radio">
+
+<t>That is one of the most common situation: one single server streaming content in multicast, the clients may start a session at random time. The content itself could be a mix of live stream as the dj's speech and stored streams as the music she plays.</t>
+
+<t>In this situation we don't know in advance how many codebooks we will use and. The clients can join anytime and users expect to start listening to the content in a short time</t>
+
+<t>On join the client will receive the current Configuration necessary to decode the current stream inlined in the SDP. And can start decoding the current stream.</t>
+
+<t>When the streamed content changes the new Configuration is sent in-band befoe the actual stream, and the Configuration that has to be sent inline in the SDP updated.</t>
+
+<t>A serverside optimization would be keep an hash list of the Configurations per session to avoid packing them and send the same Configuration with different Ident tags</t>
+<t>A clientside optimization would be keep a tag list of the Configurations per session and don't process configuration packets already known.</t>
+
+<t>Let's assume that the client playout buffer can store at least 7 packets and that is the maximum latency.</t>
+
+</section>
+</section>
+
+<section anchor="Security Considerations" title="Security Considerations">
+<t>
+RTP packets using this payload format are subject to the security considerations discussed in the RTP specification
+<xref target="rfc3550"></xref>. This implies that the confidentiality of the media stream is achieved by using
+encryption. Because the data compression used with this payload format is applied end-to-end, encryption may be performed on the
+compressed data. Where the size of a data block is set care MUST be taken to prevent buffer overflows in the client applications.
+</t>
+
+</section>
+
+<section anchor="Acknowledgments" title="Acknowledgments">
+
+<t>
+This document is a continuation of draft-moffitt-vorbis-rtp-00.txt and draft-kerr-avt-vorbis-rtp-04.txt. The MIME type section is a continuation of draft-short-avt-rtp-vorbis-mime-00.txt.
+</t>
+
+<t>
+Thanks to the AVT, Ogg Vorbis Communities / Xiph.org including Steve Casner, Aaron Colwell, Ross Finlayson, Fluendo, Ramon Garcia, Pascal Hennequin, Ralph Giles, Tor-Einar Jarnbjo, Colin Law, John Lazzaro, Jack Moffitt, Christopher Montgomery, Colin Perkins, Barry Short, Mike Smith, Phil Kerr, Michael Sparks, Magnus Westerlund, David Barrett, Silvia Pfeiffer, Politecnico di Torino (LS)³/IMG Group in particular Federico Ridolfo, Francesco Varano, Giampaolo Mancini, Juan Carlos De Martin.
+</t>
+
+</section>
+
+</middle>
+
+<back>
+
+<references title="Normative References">
+
+<reference anchor="rfc3533">
+<front>
+<title>The Ogg Encapsulation Format Version 0</title>
+<author initials="S." surname="Pfeiffer" fullname="Silvia Pfeiffer"></author>
+</front>
+<seriesInfo name="RFC" value="3533" />
+</reference>
+
+<reference anchor="rfc2119">
+<front>
+<title>Key words for use in RFCs to Indicate Requirement Levels </title>
+<author initials="S." surname="Bradner" fullname="Scott Bradner"></author>
+</front>
+<seriesInfo name="RFC" value="2119" />
+</reference>
+
+<reference anchor="rfc3550">
+<front>
+<title>RTP: A Transport Protocol for real-time applications</title>
+<author initials="H." surname="Schulzrinne" fullname=""></author>
+<author initials="S." surname="Casner" fullname=""></author>
+<author initials="R." surname="Frederick" fullname=""></author>
+<author initials="V." surname="Jacobson" fullname=""></author>
+</front>
+<seriesInfo name="RFC" value="3550" />
+</reference>
+
+<reference anchor="rfc3551">
+<front>
+<title>RTP Profile for Audio and Video Conferences with Minimal Control.</title>
+<author initials="H." surname="Schulzrinne" fullname=""></author>
+<author initials="S." surname="Casner" fullname=""></author>
+</front>
+<date month="July" year="2003" />
+<seriesInfo name="RFC" value="3551" />
+</reference>
+
+<reference anchor="rfc2327">
+<front>
+<title>SDP: Session Description Protocol</title>
+<author initials="M." surname="Handley" fullname="Mark Handley"></author>
+<author initials="V." surname="Jacobson" fullname="Van Jacobson"></author>
+</front>
+<seriesInfo name="RFC" value="2327" />
+</reference>
+
+<reference anchor="rfc1063">
+<front>
+<title>Path MTU Discovery</title>
+<author initials="J." surname="Mogul et al." fullname="J. Mogul et al."></author>
+</front>
+<seriesInfo name="RFC" value="1063" />
+</reference>
+
+<reference anchor="rfc1981">
+<front>
+<title>Path MTU Discovery for IP version 6</title>
+<author initials="J." surname="McCann et al." fullname="J. McCann et al."></author>
+</front>
+<seriesInfo name="RFC" value="1981" />
+</reference>
+
+<reference anchor="rfc3264">
+<front>
+<title>An Offer/Answer Model with Session Description Protocol (SDP)</title>
+<author initials="J." surname="Rosenberg" fullname="Jonathan Rosenberg"></author>
+<author initials="H." surname="Schulzrinne" fullname="Henning Schulzrinne"></author>
+</front>
+<seriesInfo name="RFC" value="3264" />
+</reference>
+
+<reference anchor="rfc3548">
+<front>
+<title>The Base16, Base32, and Base64 Data Encodings</title>
+<author initials="S." surname="Josefsson" fullname="Simon Josefsson"></author>
+</front>
+<seriesInfo name="RFC" value="3548" />
+</reference>
+
+<reference anchor="rtcp-feedback">
+<front>
+<title>Extended RTP Profile for RTCP-based Feedback (RTP/AVPF)</title>
+<author initials="J." surname="Ott" fullname="Joerg Ott"></author>
+<author initials="S." surname="Wenger" fullname="Stephan Wenger"></author>
+<author initials="N." surname="Sato" fullname="Noriyuki Sato"></author>
+<author initials="C." surname="Burmeister" fullname="Carsten Burmeister"></author>
+<author initials="J." surname="Rey" fullname="Jose Rey"></author>
+</front>
+<seriesInfo name="Internet Draft" value="(draft-ietf-avt-rtcp-feedback-11: Work in progress)" />
+</reference>
+
+
+</references>
+
+<references title="Informative References">
+<reference anchor="libvorbis">
+<front>
+<title>libvorbis: Available from the Xiph website, http://www.xiph.org</title>
+</front>
+</reference>
+
+<reference anchor="vorbis-spec-ref">
+<front>
+<title>Ogg Vorbis I specification: Codec setup and packet decode. Available from the Xiph website, http://www.xiph.org</title>
+</front>
+</reference>
+
+<reference anchor="v-comment">
+<front>
+<title>Ogg Vorbis I specification: Comment field and header specification. Available from the Xiph website,
+http://www.xiph.org</title>
+</front>
+</reference>
+
+<reference anchor="775itu">
+<front>
+<title>ITU (1992-1994) ITU-R Recommendation BS. 775-1 Multi-channel stereophonic sound system with or without accompanying
+picture. International Telecommunications Union. Available from the ITU website, http://www.itu.int
+</title>
+</front>
+</reference>
+
+</references>
+</back>
+</rfc>
More information about the commits
mailing list