[xiph-cvs] cvs commit: theora acinclude.m4 autogen.sh
Ralph Giles
giles at xiph.org
Fri Mar 19 14:06:48 PST 2004
giles 04/03/19 17:06:47
Modified: . autogen.sh
Added: . acinclude.m4
Log:
Fancy 'look for our installed m4 macros' check was doing more harm than
good. Revert to a hand-maintained acinclude.m4.
Revision Changes Path
1.5 +0 -24 theora/autogen.sh
Index: autogen.sh
===================================================================
RCS file: /usr/local/cvsroot/theora/autogen.sh,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -r1.4 -r1.5
--- a/autogen.sh 8 Mar 2004 06:44:26 -0000 1.4
+++ b/autogen.sh 19 Mar 2004 22:06:47 -0000 1.5
@@ -48,30 +48,6 @@
echo "Generating configuration files for $package, please wait...."
-test -f aclocal.m4 && rm aclocal.m4
-echo -n "looking for our m4 macros... "
-aclocaldirs="$srcdir `aclocal --print-ac-dir` \
- /usr/local/share/aclocal* /usr/local/aclocal* \
- /sw/share/aclocal* /usr/share/aclocal*"
-for dir in $aclocaldirs; do
- test -d "$dir" && if ! test -z "`ls $dir | grep .m4`"; then
- if test ! -z "`fgrep XIPH_PATH_OGG $dir/*.m4`"; then
- echo $dir
- ACLOCAL_FLAGS="-I $dir $ACLOCAL_FLAGS"
- break
- fi
- fi
-done
-if test -z "$ACLOCAL_FLAGS"; then
- echo "nope."
- echo
- echo "Please install the ogg and vorbis libraries, or add the"
- echo "location of ogg.m4 to ACLOCAL_FLAGS in the environment."
- echo
- exit 1
-fi
-
-
echo " aclocal $ACLOCAL_FLAGS"
aclocal $ACLOCAL_FLAGS
echo " autoheader"
<p><p>1.1 theora/acinclude.m4
Index: acinclude.m4
===================================================================
# Configure paths for libogg
# Jack Moffitt <jack at icecast.org> 10-21-2000
# Shamelessly stolen from Owen Taylor and Manish Singh
dnl XIPH_PATH_OGG([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl Test for libogg, and define OGG_CFLAGS and OGG_LIBS
dnl
AC_DEFUN([XIPH_PATH_OGG],
[dnl
dnl Get the cflags and libraries
dnl
AC_ARG_WITH(ogg,[ --with-ogg=PFX Prefix where libogg is installed (optional)], ogg_prefix="$withval", ogg_prefix="")
AC_ARG_WITH(ogg-libraries,[ --with-ogg-libraries=DIR Directory where libogg library is installed (optional)], ogg_libraries="$withval", ogg_libraries="")
AC_ARG_WITH(ogg-includes,[ --with-ogg-includes=DIR Directory where libogg header files are installed (optional)], ogg_includes="$withval", ogg_includes="")
AC_ARG_ENABLE(oggtest, [ --disable-oggtest Do not try to compile and run a test Ogg program],, enable_oggtest=yes)
if test "x$ogg_libraries" != "x" ; then
OGG_LIBS="-L$ogg_libraries"
elif test "x$ogg_prefix" != "x" ; then
OGG_LIBS="-L$ogg_prefix/lib"
elif test "x$prefix" != "xNONE" ; then
OGG_LIBS="-L$prefix/lib"
fi
OGG_LIBS="$OGG_LIBS -logg"
if test "x$ogg_includes" != "x" ; then
OGG_CFLAGS="-I$ogg_includes"
elif test "x$ogg_prefix" != "x" ; then
OGG_CFLAGS="-I$ogg_prefix/include"
elif test "x$prefix" != "xNONE"; then
OGG_CFLAGS="-I$prefix/include"
fi
AC_MSG_CHECKING(for Ogg)
no_ogg=""
<p> if test "x$enable_oggtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $OGG_CFLAGS"
LIBS="$LIBS $OGG_LIBS"
dnl
dnl Now check if the installed Ogg is sufficiently new.
dnl
rm -f conf.oggtest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ogg/ogg.h>
int main ()
{
system("touch conf.oggtest");
return 0;
}
],, no_ogg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
if test "x$no_ogg" = "x" ; then
AC_MSG_RESULT(yes)
ifelse([$1], , :, [$1])
else
AC_MSG_RESULT(no)
if test -f conf.oggtest ; then
:
else
echo "*** Could not run Ogg test program, checking why..."
CFLAGS="$CFLAGS $OGG_CFLAGS"
LIBS="$LIBS $OGG_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <ogg/ogg.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding Ogg or finding the wrong"
echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means Ogg was incorrectly installed"
echo "*** or that you have moved Ogg since it was installed." ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
OGG_CFLAGS=""
OGG_LIBS=""
ifelse([$2], , :, [$2])
fi
AC_SUBST(OGG_CFLAGS)
AC_SUBST(OGG_LIBS)
rm -f conf.oggtest
])
# Configure paths for libvorbis
# Jack Moffitt <jack at icecast.org> 10-21-2000
# Shamelessly stolen from Owen Taylor and Manish Singh
# thomasvs added check for vorbis_bitrate_addblock which is new in rc3
dnl XIPH_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS
dnl
AC_DEFUN([XIPH_PATH_VORBIS],
[dnl
dnl Get the cflags and libraries
dnl
AC_ARG_WITH(vorbis,[ --with-vorbis=PFX Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="")
AC_ARG_WITH(vorbis-libraries,[ --with-vorbis-libraries=DIR Directory where libvorbis library is installed (optional)], vorbis_libraries="$withval", vorbis_libraries="")
AC_ARG_WITH(vorbis-includes,[ --with-vorbis-includes=DIR Directory where libvorbis header files are installed (optional)], vorbis_includes="$withval", vorbis_includes="")
AC_ARG_ENABLE(vorbistest, [ --disable-vorbistest Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes)
if test "x$vorbis_libraries" != "x" ; then
VORBIS_LIBS="-L$vorbis_libraries"
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_LIBS="-L$vorbis_prefix/lib"
elif test "x$prefix" != "xNONE"; then
VORBIS_LIBS="-L$prefix/lib"
fi
VORBIS_LIBS="$VORBIS_LIBS -lvorbis -lm"
VORBISFILE_LIBS="-lvorbisfile"
VORBISENC_LIBS="-lvorbisenc"
if test "x$vorbis_includes" != "x" ; then
VORBIS_CFLAGS="-I$vorbis_includes"
elif test "x$vorbis_prefix" != "x" ; then
VORBIS_CFLAGS="-I$vorbis_prefix/include"
elif test "x$prefix" != "xNONE"; then
VORBIS_CFLAGS="-I$prefix/include"
fi
<p> AC_MSG_CHECKING(for Vorbis)
no_vorbis=""
<p> if test "x$enable_vorbistest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $VORBIS_CFLAGS $OGG_CFLAGS"
LIBS="$LIBS $VORBIS_LIBS $VORBISENC_LIBS $OGG_LIBS"
dnl
dnl Now check if the installed Vorbis is sufficiently new.
dnl
rm -f conf.vorbistest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <vorbis/codec.h>
#include <vorbis/vorbisenc.h>
int main ()
{
vorbis_block vb;
vorbis_dsp_state vd;
vorbis_info vi;
vorbis_info_init (&vi);
vorbis_encode_init (&vi, 2, 44100, -1, 128000, -1);
vorbis_analysis_init (&vd, &vi);
vorbis_block_init (&vd, &vb);
/* this function was added in 1.0rc3, so this is what we're testing for */
vorbis_bitrate_addblock (&vb);
system("touch conf.vorbistest");
return 0;
}
],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
if test "x$no_vorbis" = "x" ; then
AC_MSG_RESULT(yes)
ifelse([$1], , :, [$1])
else
AC_MSG_RESULT(no)
if test -f conf.vorbistest ; then
:
else
echo "*** Could not run Vorbis test program, checking why..."
CFLAGS="$CFLAGS $VORBIS_CFLAGS"
LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <vorbis/codec.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding Vorbis or finding the wrong"
echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means Vorbis was incorrectly installed"
echo "*** or that you have moved Vorbis since it was installed." ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
VORBIS_CFLAGS=""
VORBIS_LIBS=""
VORBISFILE_LIBS=""
VORBISENC_LIBS=""
ifelse([$2], , :, [$2])
fi
AC_SUBST(VORBIS_CFLAGS)
AC_SUBST(VORBIS_LIBS)
AC_SUBST(VORBISFILE_LIBS)
AC_SUBST(VORBISENC_LIBS)
rm -f conf.vorbistest
])
# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN([AM_PATH_SDL],
[dnl
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)],
sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program],
, enable_sdltest=yes)
if test x$sdl_exec_prefix != x ; then
sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
fi
fi
if test x$sdl_prefix != x ; then
sdl_args="$sdl_args --prefix=$sdl_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_prefix/bin/sdl-config
fi
fi
AC_REQUIRE([AC_CANONICAL_TARGET])
PATH="$prefix/bin:$prefix/usr/bin:$PATH"
AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
min_sdl_version=ifelse([$1], ,0.11.0,$1)
AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
no_sdl=""
if test "$SDL_CONFIG" = "no" ; then
no_sdl=yes
else
SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_sdltest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
rm -f conf.sdltest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main (int argc, char *argv[])
{
int major, minor, micro;
char *tmp_version;
/* This hangs on some systems (?)
system ("touch conf.sdltest");
*/
{ FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_sdl_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_sdl_version");
exit(1);
}
if (($sdl_major_version > major) ||
(($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
(($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
printf("*** to point to the correct copy of sdl-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_sdl" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$SDL_CONFIG" = "no" ; then
echo "*** The sdl-config script installed by SDL could not be found"
echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the SDL_CONFIG environment variable to the"
echo "*** full path to sdl-config."
else
if test -f conf.sdltest ; then
:
else
echo "*** Could not run SDL test program, checking why..."
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"
int main(int argc, char *argv[])
{ return 0; }
#undef main
#define main K_and_R_C_main
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding SDL or finding the wrong"
echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means SDL was incorrectly installed"
echo "*** or that you have moved SDL since it was installed. In the latter case, you"
echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
SDL_CFLAGS=""
SDL_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(SDL_CFLAGS)
AC_SUBST(SDL_LIBS)
rm -f conf.sdltest
])
<p><p>--- >8 ----
List archives: http://www.xiph.org/archives/
Ogg project homepage: http://www.xiph.org/ogg/
To unsubscribe from this list, send a message to 'cvs-request at xiph.org'
containing only the word 'unsubscribe' in the body. No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
More information about the commits
mailing list